1.  In america, workers are protected from the damaging health effects of high degree noise exposure through the Occupational Safety and Health Administration (OSHA) noise standards.
2.  Factory workers might be subjected to excessive noise levels due to employed close to high sound machines. https://kikipedia.win/wiki/Noise_Control_in_the_Workplace_is_Critical_as_well_as_a_lawful_Requirement is not unusual for workers in a few factories to operate in areas where the sound level exceeds 100 dBA.
3.  
4.  Using personal hearing protection to achieve OSHA's noise standards is considered a last resort for use only after feasible engineering and administrative noise control measures have failed to reduce the sound sufficiently. For that reason, administrative and engineering controls are of primary importance.
5.  Noise control measures for factories need to meet the following criteria:
6.  They must not block workers or considerably alter the way operators utilize the machine.
7.  Noise challenges and machine enclosures can be an effective way to reduce noise; however their design must not significantly impede workers or reduce productivity. Challenging in factories may be designing effective noise barriers that usually do not obstruct walkways or fork lift paths.
8.  https://lovewiki.faith/wiki/Assessing_Noise_in_Factories must have the ability to withstand working conditions from the factory.
9.  Any sound control measures must be created to that environment in which they are placed. The materials from the sound control is constructed must not be affected by dirt, oil or water if these are commonplace from the mill. The substances need to have the ability to resist effects if put into areas of high traffic.
10.  They need to keep the productivity and dependability of the machine, not cause malfunctions or technology problems.
11.  Factory machines must work as designed after any modifications have been made to the machine. https://wikidot.win/wiki/Acoustic_Enclosures reduce productivity.
12.  Enclosing machines using acoustically rated enclosures can be a really effective technique of noise control. But this system can restrict airflow into the machine and present overheating issues. Cooling systems might be required, which could themselves demand noise management methods.
13.  They have to maintain visibility to factory machines and areas where required.
14.  Workers usually will need to inspect machines when in operation. Noise control measures must not prevent vulnerability to critical locations. Managers need to be able to see in to areas where employees are working. Transparent sound control materials should be viewed in locations where visibility is required.
15.  Noise advisers specialize in analyzing sound degrees and designing noise control systems. A good sound adviser should be able to design noise control measures while satisfying the above mentioned criteria.
16.