Facebook
From Chocolate Tern, 5 Months ago, written in Plain Text.
Embed
Download Paste or View Raw
Hits: 97
  1. smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-RELEASE-p11 i386] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Western Digital Scorpio Blue Serial ATA
  6. Device Model:     WDC WD3200BEVT-22A23T0
  7. Serial Number:    WD-WX41A70T2359
  8. LU WWN Device Id: 5 0014ee 655a65d59
  9. Firmware Version: 01.01A01
  10. User Capacity:    320¬†072¬†933¬†376 bytes [320 GB]
  11. Sector Size:      512 bytes logical/physical
  12. Rotation Rate:    5400 rpm
  13. Device is:        In smartctl database [for details use: -P show]
  14. ATA Version is:   ATA8-ACS (minor revision not indicated)
  15. SATA Version is:  SATA 2.6, 3.0 Gb/s
  16. Local Time is:    Sun Jul  8 11:56:59 2018 CEST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status:  (0x00) Offline data collection activity
  25.                                         was never started.
  26.                                         Auto Offline Data Collection: Disabled.
  27. Self-test execution status:      (   0) The previous self-test routine completed
  28.                                         without error or no self-test has ever
  29.                                         been run.
  30. Total time to complete Offline
  31. data collection:                ( 7980) seconds.
  32. Offline data collection
  33. capabilities:                    (0x7b) SMART execute Offline immediate.
  34.                                         Auto Offline data collection on/off support.
  35.                                         Suspend Offline collection upon new
  36.                                         command.
  37.                                         Offline surface scan supported.
  38.                                         Self-test supported.
  39.                                         Conveyance Self-test supported.
  40.                                         Selective Self-test supported.
  41. SMART capabilities:            (0x0003) Saves SMART data before entering
  42.                                         power-saving mode.
  43.                                         Supports SMART auto save timer.
  44. Error logging capability:        (0x01) Error logging supported.
  45.                                         General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time:        (   2) minutes.
  48. Extended self-test routine
  49. recommended polling time:        (  95) minutes.
  50. Conveyance self-test routine
  51. recommended polling time:        (   5) minutes.
  52. SCT capabilities:              (0x7037) SCT Status supported.
  53.                                         SCT Feature Control supported.
  54.                                         SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  59.   1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       69
  60.   3 Spin_Up_Time            0x0027   153   127   021    Pre-fail  Always       -       1350
  61.   4 Start_Stop_Count        0x0032   001   001   000    Old_age   Always       -       141830
  62.   5 Reallocated_Sector_Ct   0x0033   149   149   140    Pre-fail  Always       -       561
  63.   7 Seek_Error_Rate         0x002e   200   199   000    Old_age   Always       -       0
  64.   9 Power_On_Hours          0x0032   090   090   000    Old_age   Always       -       7773
  65.  10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
  66.  11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
  67.  12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2606
  68. 191 G-Sense_Error_Rate      0x0032   001   001   000    Old_age   Always       -       3131
  69. 192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       180
  70. 193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       764569
  71. 194 Temperature_Celsius     0x0022   096   094   000    Old_age   Always       -       47
  72. 196 Reallocated_Event_Count 0x0032   191   191   000    Old_age   Always       -       9
  73. 197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
  74. 198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
  75. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
  76. 200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0
  77.  
  78. SMART Error Log Version: 1
  79. No Errors Logged
  80.  
  81. SMART Self-test log structure revision number 1
  82. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  83.  
  84. SMART Selective self-test log data structure revision number 1
  85.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  86.     1        0        0  Not_testing
  87.     2        0        0  Not_testing
  88.     3        0        0  Not_testing
  89.     4        0        0  Not_testing
  90.     5        0        0  Not_testing
  91. Selective self-test flags (0x0):
  92.   After scanning selected spans, do NOT read-scan remainder of disk.
  93. If Selective self-test is pending on power-up, resume after 0 minute delay.
  94.  
  95.