1. stulluk ~ $  sudo minicom rockpiS
2.  
3.  
4. Welcome to minicom 2.7.1
5.  
6. OPTIONS: I18n
7. Compiled on Aug 13 2017, 15:25:34.
8. Port /dev/ttyUSB0, 13:36:46
9.  
10. Press CTRL-A Z for help on special keys
11.  
12.  
13. DDR Version V1.26
14. REGFB: 0x00000032, 0x00000032
15. In
16. 589MHz
17. DDR3
18.  Col=10 Bank=8 Row=15 Size=512MB
19. msch:1
20. Returning to boot ROM...
21. INFO:    Preloader serial: 0
22. NOTICE:  BL31: v1.3(release):3a579d3
23. NOTICE:  BL31: Built : 09:09:17, Jan 29 2019
24. INFO:    Lastlog: last=0x100000, realtime=0x102000, size=0x2000
25. INFO:    ARM GICv2 driver initialized
26. INFO:    Using opteed sec cpu_context!
27. INFO:    boot cpu mask: 1
28. INFO:    plat_rockchip_pmu_init: pd status 0xe
29. INFO:    BL31: Initializing runtime services
30. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
31. ERROR:   Error initializing runtime service opteed_fast
32. INFO:    BL31: Preparing for EL3 exit to normal world
33. INFO:    Entry point address = 0x600000
34. INFO:    SPSR = 0x3c9
35.  
36.  
37. U-Boot 2017.09-02383-g233a23e3ed (Aug 05 2020 - 08:33:06 +0000), Build: jenkins-linux-build-release-293
38.  
39. Model: Radxa ROCK Pi S
40. PreSerial: 0
41. DRAM:  510 MiB
42. Relocation Offset is: 1f91c000
43. vdd_core 1044000 uV
44. vdd-core init 1044000 uV
45. MMC:   dwmmc@ff480000: 0, dwmmc@ff490000: 1
46. Using default environment
47.  
48. In:    serial@ff0c0000
49. Out:   serial@ff0c0000
50. Err:   serial@ff0c0000
51. Model: Radxa ROCK Pi S
52. Bootdev(atags): mmc 0
53. PartType: EFI
54. ## Error: Can't overwrite "serial#"
55. ## Error inserting "serial#" variable, errno=1
56. get part misc fail -1
57. boot mode: None
58. CLK:
59. apll 816000 KHz
60. dpll 1300000 KHz
61. vpll0 1179647 KHz
62. vpll1 903167 KHz
63. aclk_bus 185714 KHz
64. hclk_bus 100000 KHz
65. pclk_bus 100000 KHz
66. aclk_peri 185714 KHz
67. hclk_peri 100000 KHz
68. pclk_peri 100000 KHz
69. hclk_audio 98303 KHz
70. pclk_audio 98303 KHz
71. Net:   Net Initialization Skipped
72. No ethernet found.
73. Hit key to stop autoboot('CTRL+C'):  0
74. starting USB...
75. USB0:   Core Release: 3.10a
76. USB1:   USB EHCI 1.00
77. scanning bus 0 for devices... 1 USB Device(s) found
78. scanning bus 1 for devices... 1 USB Device(s) found
79.        scanning usb for storage devices... 0 Storage Device(s) found
80.  
81. Device 0: unknown device
82. switch to partitions #0, OK
83. mmc0 is current device
84. Scanning mmc 0:1...
85. Found U-Boot script /boot.scr
86. reading /boot.scr
87. 2641 bytes read in 2 ms (1.3 MiB/s)
88. ## Executing script at 00500000
89. Boot script loaded from mmc 0
90. reading /uEnv.txt
91. 317 bytes read in 1 ms (309.6 KiB/s)
92. reading /initrd.img-4.4.143-55-rockchip-g6b7accbc999b
93. 6476851 bytes read in 278 ms (22.2 MiB/s)
94. reading /vmlinuz-4.4.143-55-rockchip-g6b7accbc999b
95. 10663944 bytes read in 455 ms (22.4 MiB/s)
96. reading /dtbs/4.4.143-55-rockchip-g6b7accbc999b/rockchip/rk3308-rock-pi-s.dtb
97. 63554 bytes read in 7 ms (8.7 MiB/s)
98. reading /dtbs/4.4.143-55-rockchip-g6b7accbc999b/rockchip/overlay/rk3308-uart0.dtbo
99. 382 bytes read in 9 ms (41 KiB/s)
100. Applying kernel provided DT overlay rk3308-uart0.dtbo
101. reading /dtbs/4.4.143-55-rockchip-g6b7accbc999b/rockchip/overlay/rockchip-fixup.scr
102. 1814 bytes read in 9 ms (196.3 KiB/s)
103. Applying kernel provided DT fixup script (rockchip-fixup.scr)
104. ## Executing script at 05000000
105. initrdsize = 0x62d433
106. ## Flattened Device Tree blob at 01f00000
107.    Booting using the fdt blob at 0x1f00000
108.    reserving fdt memory region: addr=1f00000 size=75000
109.    Loading Ramdisk to 1eede000, end 1f50b433 ... OK
110.    Loading Device Tree to 000000001ee66000, end 000000001eeddfff ... OK
111. Adding bank: 0x00200000 - 0x20000000 (size: 0x1fe00000)
112.  
113. Starting kernel ...
114.  
115.  
116. WARNING: suspend_mode_handler: Not support call: 0x4
117. [    0.000000] Booting Linux on physical CPU 0x0
118. [    0.000000] Initializing cgroup subsys cpuset
119. [    0.000000] Initializing cgroup subsys cpu
120. [    0.000000] Initializing cgroup subsys cpuacct
121. [    0.000000] Linux version 4.4.143-55-rockchip-g6b7accbc999b (root@431768422ca2) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Jul 29 02:54:35 UTC 2020
122. [    0.000000] Boot CPU: AArch64 Processor [410fd042]
123. [    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
124. [    0.000000] psci: probing for conduit method from DT.
125. [    0.000000] psci: PSCIv1.0 detected in firmware.
126. [    0.000000] psci: Using standard PSCI v0.2 function IDs
127. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
128. [    0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc01ff56000 s40344 r8192 d29288 u77824
129. [    0.000000] Detected VIPT I-cache on CPU0
130. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128520
131. [    0.000000] Kernel command line: initrd=initrd.img-4.4.143-55-rockchip-g6b7accbc999b root=UUID=e6cc3977-ae0c-4340-9b51-66197ebac83d rootwait rw rootfstype=ext4 console=tty1 console=ttyS0,1500000n8 panic=10 consoleblank=0 loglevel=7  
132. [    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
133. [    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
134. [    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
135. [    0.000000] software IO TLB [mem 0x19e66000-0x1de66000] (64MB) mapped at [ffffffc019e66000-ffffffc01de65fff]
136. [    0.000000] Memory: 428812K/522240K available (6910K kernel code, 558K rwdata, 2492K rodata, 384K init, 522K bss, 93428K reserved, 0K cma-reserved)
137. [    0.000000] Virtual kernel memory layout:
138. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
139. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
140. [    0.000000]       .init : 0xffffff80089c0000 - 0xffffff8008a20000   (   384 KB)
141. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008740000   (  6912 KB)
142. [    0.000000]     .rodata : 0xffffff8008740000 - 0xffffff80089c0000   (  2560 KB)
143. [    0.000000]       .data : 0xffffff8008a20000 - 0xffffff8008aab808   (   559 KB)
144. [    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
145. [    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
146. [    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc020000000   (   510 MB)
147. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
148. [    0.000000] Preemptible hierarchical RCU implementation.
149. [    0.000000]  Build-time adjustment of leaf fanout to 64.
150. [    0.000000] NR_IRQS:64 nr_irqs:64 0
151. [    0.000000] GIC: Using split EOI/Deactivate mode
152. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
153. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
154. [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
155. [    0.001028] Console: colour dummy device 80x25
156. [    0.002540] console [tty1] enabled
157. [    0.002596] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
158. [    0.002674] pid_max: default: 32768 minimum: 301
159. [    0.002795] Security Framework initialized
160. [    0.002841] AppArmor: AppArmor disabled by boot time parameter
161. [    0.002942] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
162. [    0.002990] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
163. [    0.003835] Initializing cgroup subsys io
164. [    0.003895] Initializing cgroup subsys memory
165. [    0.003963] Initializing cgroup subsys devices
166. [    0.004009] Initializing cgroup subsys freezer
167. [    0.004056] Initializing cgroup subsys net_cls
168. [    0.004100] Initializing cgroup subsys perf_event
169. [    0.004147] Initializing cgroup subsys net_prio
170. [    0.004200] Initializing cgroup subsys hugetlb
171. [    0.004244] Initializing cgroup subsys pids
172. [    0.004613] sched-energy: CPU device node has no sched-energy-costs
173. [    0.004664] Invalid sched_group_energy for CPU0
174. [    0.004704] CPU0: update cpu_capacity 1024
175. [    0.004791] ASID allocator initialised with 65536 entries
176. [    0.039876] Detected VIPT I-cache on CPU1
177. [    0.039937] Invalid sched_group_energy for CPU1
178. [    0.039941] CPU1: update cpu_capacity 1024
179. [    0.039947] CPU1: Booted secondary processor [410fd042]
180. [    0.051900] Detected VIPT I-cache on CPU2
181. [    0.051942] Invalid sched_group_energy for CPU2
182. [    0.051946] CPU2: update cpu_capacity 1024
183. [    0.051951] CPU2: Booted secondary processor [410fd042]
184. [    0.063943] Detected VIPT I-cache on CPU3
185. [    0.063982] Invalid sched_group_energy for CPU3
186. [    0.063986] CPU3: update cpu_capacity 1024
187. [    0.063991] CPU3: Booted secondary processor [410fd042]
188. [    0.064071] Brought up 4 CPUs
189. [    0.064516] SMP: Total of 4 processors activated.
190. [    0.064562] CPU: All CPU(s) started at EL2
191. [    0.064747] Invalid sched_group_energy for CPU3
192. [    0.064791] Invalid sched_group_energy for Cluster3
193. [    0.064830] Invalid sched_group_energy for CPU2
194. [    0.064868] Invalid sched_group_energy for Cluster2
195. [    0.064907] Invalid sched_group_energy for CPU1
196. [    0.064945] Invalid sched_group_energy for Cluster1
197. [    0.064982] Invalid sched_group_energy for CPU0
198. [    0.065020] Invalid sched_group_energy for Cluster0
199. [    0.065696] devtmpfs: initialized
200. [    0.083471] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
201. [    0.083576] futex hash table entries: 1024 (order: 4, 65536 bytes)
202. [    0.084137] pinctrl core: initialized pinctrl subsystem
203. [    0.085432] NET: Registered protocol family 16
204. [    0.096107] cpuidle: using governor menu
205. [    0.096183] Registered FIQ tty driver
206. [    0.096539] vdso: 2 pages (1 code @ ffffff8008746000, 1 data @ ffffff8008a24000)
207. [    0.096637] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
208. [    0.096905] DMA: preallocated 256 KiB pool for atomic allocations
209. [    0.099113] console [pstore-1] enabled
210. [    0.099158] pstore: Registered ramoops as persistent store backend
211. [    0.099204] ramoops: attached 0xf0000@0x110000, ecc: 0/0
212. [    0.143808] vcc_1v8: regulator get failed, ret=-517
213. [    0.144761] vcc_1v8_codec: regulator get failed, ret=-517
214. [    0.145609] vcc_1v8: supplied by vcc_io
215. [    0.145724] vcc_1v8_codec: supplied by vcc_io
216. [    0.148029] SCSI subsystem initialized
217. [    0.148735] usbcore: registered new interface driver usbfs
218. [    0.148853] usbcore: registered new interface driver hub
219. [    0.149003] usbcore: registered new device driver usb
220. [    0.149202] media: Linux media interface: v0.10
221. [    0.149294] Linux video capture interface: v2.00
222. [    0.149444] pps_core: LinuxPPS API ver. 1 registered
223. [    0.149488] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
224. [    0.149584] PTP clock support registered
225. [    0.150825] Advanced Linux Sound Architecture Driver Initialized.
226. [    0.151599] Bluetooth: Core ver 2.21
227. [    0.151686] NET: Registered protocol family 31
228. [    0.151727] Bluetooth: HCI device and connection manager initialized
229. [    0.151781] Bluetooth: HCI socket layer initialized
230. [    0.151828] Bluetooth: L2CAP socket layer initialized
231. [    0.151900] Bluetooth: SCO socket layer initialized
232. [    0.152550] NetLabel: Initializing
233. [    0.152602] NetLabel:  domain hash size = 128
234. [    0.152641] NetLabel:  protocols = UNLABELED CIPSOv4
235. [    0.152764] NetLabel:  unlabeled traffic allowed by default
236. [    0.153424] rockchip-cpuinfo cpuinfo: Serial         : f31a16820b26213b
237. [    0.154141] clocksource: Switched to clocksource arch_sys_counter
238. [    0.166695] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
239. [    0.166788] missing polling-delay-passive property
240. [    0.166830] failed to build thermal zone soc_thermal: -22
241. [    0.167233] NET: Registered protocol family 2
242. [    0.168034] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
243. [    0.168156] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
244. [    0.168279] TCP: Hash tables configured (established 4096 bind 4096)
245. [    0.168411] UDP hash table entries: 256 (order: 1, 8192 bytes)
246. [    0.168473] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
247. [    0.168766] NET: Registered protocol family 1
248. [    0.169391] Trying to unpack rootfs image as initramfs...
249. [    0.655860] Freeing initrd memory: 6324K
250. [    0.656556] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
251. [    0.660511] audit: initializing netlink subsys (disabled)
252. [    0.660641] audit: type=2000 audit(0.656:1): initialized
253. [    0.661537] HugeTLB registered 2 MB page size, pre-allocated 0 pages
254. [    0.671153] squashfs: version 4.0 (2009/01/31) Phillip Lougher
255. [    0.672027] fuse init (API version 7.23)
256. [    0.676776] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
257. [    0.677044] io scheduler noop registered
258. [    0.677099] io scheduler deadline registered (default)
259. [    0.677333] io scheduler cfq registered
260. [    0.683086] dma-pl330 ff2c0000.dma-controller: Loaded driver for PL330 DMAC-241330
261. [    0.683183] dma-pl330 ff2c0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
262. [    0.685607] dma-pl330 ff2d0000.dma-controller: Loaded driver for PL330 DMAC-241330
263. [    0.685693] dma-pl330 ff2d0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
264. [    0.686116] rockchip-pvtm ff000000.grf:pmu-pvtm: failed to get rst 0 pmu
265. [    0.686359] rockchip-pvtm ff00c000.syscon:pvtm: failed to get rst 0 core
266. [    0.687950] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
267. [    0.690272] console [ttyS0] disabled
268. [    0.690398] ff0a0000.serial: ttyS0 at MMIO 0xff0a0000 (irq = 11, base_baud = 1500000) is a 16550A
269. [    0.767792] console [ttyS0] enabled
270. [    0.769342] ff0e0000.serial: ttyS4 at MMIO 0xff0e0000 (irq = 12, base_baud = 5078125) is a 16550A
271. [    0.771245] [drm] Initialized drm 1.1.0 20060810
272. [    0.774189] Unable to detect cache hierarchy for CPU 0
273. [    0.775867] brd: module loaded
274. [    0.783698] loop: module loaded
275. [    0.784480] SCSI Media Changer driver v0.25
276. [    0.787217] rk_gmac-dwmac ff4e0000.ethernet: clock input or output? (output).
277. [    0.787911] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: tx_delay.
278. [    0.788580] rk_gmac-dwmac ff4e0000.ethernet: set tx_delay to 0x30
279. [    0.789158] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: rx_delay.
280. [    0.789826] rk_gmac-dwmac ff4e0000.ethernet: set rx_delay to 0x10
281. [    0.790466] rk_gmac-dwmac ff4e0000.ethernet: integrated PHY? (no).
282. [    0.796329] rk_gmac-dwmac ff4e0000.ethernet: init for RMII
283. [    0.796971] stmmac - user ID: 0x10, Synopsys ID: 0x35
284. [    0.797452]  Ring mode enabled
285. [    0.797754]  DMA HW capability register supported
286. [    0.798196]  Normal descriptors
287. [    0.798549]  RX Checksum Offload Engine supported (type 2)
288. [    0.799065]  TX Checksum insertion supported
289. [    0.799473]  Wake-Up On Lan supported
290. [    0.799887]  Enable RX Mitigation via HW Watchdog Timer
291. [    0.915704] brian phy in rtl8201f_probe
292. [    0.920999] brian phy in rtl8201f_probe
293. [    0.924198] libphy: stmmac: probed
294. [    0.924542] eth%d: PHY ID 001cc816 at 0 IRQ POLL (stmmac-0:00) active
295. [    0.925147] eth%d: PHY ID 001cc816 at 1 IRQ POLL (stmmac-0:01)
296. [    0.926883] Rockchip WiFi SYS interface (V1.00) ...
297. [    0.927795] ff400000.usb supply vusb_d not found, using dummy regulator
298. [    0.928502] ff400000.usb supply vusb_a not found, using dummy regulator
299. [    1.154214] dwc2 ff400000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
300. [    1.155445] dwc2 ff400000.usb: DWC OTG Controller
301. [    1.155937] dwc2 ff400000.usb: new USB bus registered, assigned bus number 1
302. [    1.156637] dwc2 ff400000.usb: irq 20, io mem 0xff400000
303. [    1.157476] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
304. [    1.158122] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
305. [    1.158872] usb usb1: Product: DWC OTG Controller
306. [    1.159328] usb usb1: Manufacturer: Linux 4.4.143-55-rockchip-g6b7accbc999b dwc2_hsotg
307. [    1.160086] usb usb1: SerialNumber: ff400000.usb
308. [    1.161346] hub 1-0:1.0: USB hub found
309. [    1.161759] hub 1-0:1.0: 1 port detected
310. [    1.385633] phy phy-ff008000.syscon:[email protected]: charger = USB_SDP_CHARGER
311. [    1.386471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
312. [    1.387100] ehci-platform: EHCI generic platform driver
313. [    1.391438] ehci-platform ff440000.usb: EHCI Host Controller
314. [    1.392233] ehci-platform ff440000.usb: new USB bus registered, assigned bus number 2
315. [    1.393123] ehci-platform ff440000.usb: irq 21, io mem 0xff440000
316. [    1.402200] ehci-platform ff440000.usb: USB 2.0 started, EHCI 1.00
317. [    1.402992] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
318. [    1.403635] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
319. [    1.404332] usb usb2: Product: EHCI Host Controller
320. [    1.404802] usb usb2: Manufacturer: Linux 4.4.143-55-rockchip-g6b7accbc999b ehci_hcd
321. [    1.405543] usb usb2: SerialNumber: ff440000.usb
322. [    1.406727] hub 2-0:1.0: USB hub found
323. [    1.407135] hub 2-0:1.0: 1 port detected
324. [    1.408117] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
325. [    1.408735] ohci-platform: OHCI generic platform driver
326. [    1.409612] ohci-platform ff450000.usb: Generic Platform OHCI controller
327. [    1.410557] ohci-platform ff450000.usb: new USB bus registered, assigned bus number 3
328. [    1.411477] ohci-platform ff450000.usb: irq 22, io mem 0xff450000
329. [    1.470382] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
330. [    1.471029] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
331. [    1.471726] usb usb3: Product: Generic Platform OHCI controller
332. [    1.472290] usb usb3: Manufacturer: Linux 4.4.143-55-rockchip-g6b7accbc999b ohci_hcd
333. [    1.473032] usb usb3: SerialNumber: ff450000.usb
334. [    1.474225] hub 3-0:1.0: USB hub found
335. [    1.474638] hub 3-0:1.0: 1 port detected
336. [    1.477137] i2c /dev entries driver
337. [    1.477968] usbcore: registered new interface driver uvcvideo
338. [    1.478549] USB Video Class driver (1.1.1)
339. [    1.481267] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=2147483647
340. [    1.482453] rockchip-thermal ff1f0000.tsadc: tsadc is probed successfully!
341. [    1.484492] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
342. [    1.485328] Bluetooth: Virtual HCI driver ver 1.5
343. [    1.486311] cpu cpu0: leakage=9
344. [    1.486907] cpu cpu0: Failed to get pvtm
345. [    1.488549] cpu cpu0: l=0 h=55000 hyst=5000 l_limit=1200000000 h_limit=1008000000
346. [    1.490765] Synopsys Designware Multimedia Card Interface Driver
347. [    1.492477] dwmmc_rockchip ff480000.dwmmc: IDMAC supports 32-bit address mode.
348. [    1.493225] dwmmc_rockchip ff480000.dwmmc: Using internal DMA controller.
349. [    1.493875] dwmmc_rockchip ff480000.dwmmc: Version ID is 270a
350. [    1.494544] dwmmc_rockchip ff480000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo
351. [    1.510327] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
352. [    1.527301] dwmmc_rockchip ff480000.dwmmc: 1 slots initialized
353. [    1.530295] dwmmc_rockchip ff490000.dwmmc: IDMAC supports 32-bit address mode.
354. [    1.531057] dwmmc_rockchip ff490000.dwmmc: Using internal DMA controller.
355. [    1.532741] dwmmc_rockchip ff490000.dwmmc: Version ID is 270a
356. [    1.535379] dwmmc_rockchip ff490000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
357. [    1.536390] dwmmc_rockchip ff490000.dwmmc: No vmmc regulator found
358. [    1.537002] dwmmc_rockchip ff490000.dwmmc: No vqmmc regulator found
359. [    1.550258] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
360. [    1.560135] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
361. [    1.561124] mmc0: new high speed SDHC card at address 5048
362. [    1.562707] mmcblk0: mmc0:5048 SD16G 14.4 GiB
363. [    1.567301] dwmmc_rockchip ff490000.dwmmc: 1 slots initialized
364. [    1.568924] dwmmc_rockchip ff4a0000.dwmmc: num-slots property not found, assuming 1 slot is available
365. [    1.570051] dwmmc_rockchip ff4a0000.dwmmc: IDMAC supports 32-bit address mode.
366. [    1.571050] dwmmc_rockchip ff4a0000.dwmmc: Using internal DMA controller.
367. [    1.571930]  mmcblk0: p1 p2
368. [    1.572499] dwmmc_rockchip ff4a0000.dwmmc: Version ID is 270a
369. [    1.573767] dwmmc_rockchip ff4a0000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
370. [    1.574823] dwmmc_rockchip ff4a0000.dwmmc: No vmmc regulator found
371. [    1.575411] dwmmc_rockchip ff4a0000.dwmmc: No vqmmc regulator found
372. [    1.576533] dwmmc_rockchip ff4a0000.dwmmc: allocated mmc-pwrseq
373. [    1.590377] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
374. [    1.604046] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
375. [    1.605064] mmc1: new SD card at address 2139
376. [    1.606303] dwmmc_rockchip ff4a0000.dwmmc: 1 slots initialized
377. [    1.609179] hidraw: raw HID events driver (C) Jiri Kosina
378. [    1.610608] mmcblk1: mmc1:2139 XTSDA 990 MiB
379. [    1.610945] usbcore: registered new interface driver usbhid
380. [    1.610947] usbhid: USB HID core driver
381. [    1.611224] rockchip-dmc dmc: failed to get the count of devfreq-event in /dmc node
382. [    1.611536] rockchip-dmc dmc: Failed to get leakage
383. [    1.611620] rockchip-dmc dmc: Failed to get pvtm
384. [    1.611938] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
385. [    1.611946] rockchip-dmc dmc: failed to get vop pn to msch rl
386. [    1.611954] rockchip-dmc dmc: don't add devfreq feature
387. [    1.613124] dwmmc_rockchip ff4a0000.dwmmc: card claims to support voltages below defined range
388. [    1.614223] rknandc_base v1.1 2017-01-11
389. [    1.614495] rksfc_base v1.1 2016-01-08
390. [    1.618513]  mmcblk1: p1
391. [    1.619722] dummy_codec dummy-codec: Unable to get mclk
392. [    1.620939] rk3308-acodec ff560000.acodec: Don't need hp-ctl gpio
393. [    1.621647] rk3308-acodec ff560000.acodec: Don't need spk-ctl gpio
394. [    1.622389] rk3308-acodec ff560000.acodec: Don't need pa-drv gpio
395. [    1.623002] rk3308-acodec ff560000.acodec: De-pop as much as possible
396. [    1.623758] The acodec version is: a
397. [    1.625948] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
398. [    1.628086] mmc2: new high speed SDIO card at address 0001
399. [    1.683855] rk-multicodecs acodec-sound: rk3308-hifi <-> ff320000.i2s mapping ok
400. [    1.685935] input: rockchip,rk3308-acodec Headphones as /devices/platform/acodec-sound/sound/card1/input0
401. [    1.687722] u32 classifier
402. [    1.688020] Netfilter messages via NETLINK v0.30.
403. [    1.688539] ip_set: protocol 6
404. [    1.689078] ip_tables: (C) 2000-2006 Netfilter Core Team
405. [    1.689600] Initializing XFRM netlink socket
406. [    1.690642] NET: Registered protocol family 10
407. [    1.692401] ip6_tables: (C) 2000-2006 Netfilter Core Team
408. [    1.692942] NET: Registered protocol family 17
409. [    1.693386] NET: Registered protocol family 15
410. [    1.693851] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
411. [    1.694335] rk3308-acodec ff560000.acodec: Don't need to change dac_output: 0
412. [    1.696602] Bridge firewalling registered
413. [    1.697241] Bluetooth: RFCOMM TTY layer initialized
414. [    1.697719] Bluetooth: RFCOMM socket layer initialized
415. [    1.698257] Bluetooth: RFCOMM ver 1.11
416. [    1.698694] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
417. [    1.699316] Bluetooth: HIDP socket layer initialized
418. [    1.699849] 8021q: 802.1Q VLAN Support v1.8
419. [    1.700354] [WLAN_RFKILL]: Enter rfkill_wlan_init
420. [    1.701665] [WLAN_RFKILL]: Enter rfkill_wlan_probe
421. [    1.702245] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = rtl8723ds
422. [    1.702963] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
423. [    1.703675] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
424. [    1.704611] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 0, flags = 0.
425. [    1.705618] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
426. [    1.706218] [WLAN_RFKILL]: Exit rfkill_wlan_probe
427. [    1.706847] [BT_RFKILL]: Enter rfkill_rk_init
428. [    1.708151] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 135.
429. [    1.709055] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 139.
430. [    1.709994] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 140.
431. [    1.710974] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
432. [    1.711666] [BT_RFKILL]: Request irq for bt wakeup host
433. [    1.712207] [BT_RFKILL]: ** disable irq
434. [    1.712776] [BT_RFKILL]: bt_default device registered.
435. [    1.713367] Key type dns_resolver registered
436. [    1.714441] flash vendor_init_thread!
437. [    1.714813] flash vendor storage:20170308 ret = -1
438. [    1.715598] registered taskstats version 1
439. [    1.732550] Key type encrypted registered
440. [    1.733879] hctosys: unable to open rtc device (rtc0)
441. [    1.748931] ALSA device list:
442. [    1.749249]   #0: Loopback 1
443. [    1.749530]   #1: rockchip,rk3308-acodec
444. [    1.750752] Freeing unused kernel memory: 384K
445. Loading, please wait...
446. starting version 237
447. Begin: Loading essential drivers ... done.
448. Begin: Running /scripts/init-premount ... done.
449. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
450. Begin: Running /scripts/local-premount ... done.
451. Warning: fsck not present, so skipping root file system
452. [    2.636328] EXT4-fs (mmcblk0p2): recovery complete
453. [    2.638694] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
454. done.
455. Begin: Running /scripts/local-bottom ... done.
456. Begin: Running /scripts/init-bottom ... done.
457. [    3.283164] systemd[1]: System time before build time, advancing clock.
458. [    3.289386] cgroup: cgroup2: unknown option "nsdelegate"
459. [    3.306297] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
460. [    3.309718] systemd[1]: Detected architecture arm64.
461.  
462. Welcome to Ubuntu 18.04 LTS!
463.  
464. [    3.336206] systemd[1]: Set hostname to <rockpis>.
465. [    3.558292] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
466. [    3.560052] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
467. [    3.876999] random: systemd: uninitialized urandom read (16 bytes read, 62 bits of entropy available)
468. [    3.880301] systemd[1]: Created slice System Slice.
469. [  OK  ] Created slice System Slice.
470. [    3.882929] random: systemd: uninitialized urandom read (16 bytes read, 62 bits of entropy available)
471. [    3.884559] systemd[1]: Listening on udev Control Socket.
472. [  OK  ] Listening on udev Control Socket.
473. [    3.894649] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available)
474. [    3.896026] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
475. [  OK  ] Started Dispatch Password Requests to Console Directory Watch.
476. [    3.898748] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available)
477. [    3.900466] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
478. [  OK  ] Set up automount Arbitrary Executab��…rmats File System Automount Point.
479. [    3.903051] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available)
480. [    3.904418] systemd[1]: Listening on udev Kernel Socket.
481. [  OK  ] Listening on udev Kernel Socket.
482. [    3.914568] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available)
483. [    3.916208] systemd[1]: Listening on Journal Socket (/dev/log).
484. [  OK  ] Listening on Journal Socket (/dev/log).
485. [    3.922678] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available)
486. [    3.925618] systemd[1]: Set up automount boot.automount.
487. [  OK  ] Set up automount boot.automount.
488. [    3.934632] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available)
489. [    3.935674] systemd[1]: Reached target Remote File Systems.
490. [  OK  ] Reached target Remote File Systems.
491. [    3.942679] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available)
492. [    3.944384] systemd[1]: Listening on Journal Socket.
493. [  OK  ] Listening on Journal Socket.
494. [    3.957808] random: systemd: uninitialized urandom read (16 bytes read, 64 bits of entropy available)
495. [    3.964158] systemd[1]: Starting Create list of required static device nodes for the current kernel...
496.          Starting Create list of required st��…ce nodes for the current kernel...
497. [    3.975899] systemd[1]: Mounting Kernel Debug File System...
498.          Mounting Kernel Debug File System...
499. [    3.985197] systemd[1]: Listening on Journal Audit Socket.
500. [  OK  ] Listening on Journal Audit Socket.
501. [    4.003023] systemd[1]: Mounting Huge Pages File System...
502.          Mounting Huge Pages File System...
503. [    4.022380] systemd[1]: Starting Load Kernel Modules...
504.          Starting Load Kernel Modules...
505. [    4.038363] systemd[1]: Starting Journal Service...
506.          Starting Journal Service...
507. [    4.043241] systemd[1]: Created slice system-getty.slice.
508. [  OK  ] Created slice system-getty.slice.
509. [    4.052991] systemd[1]: Starting Remount Root and Kernel File Systems...
510.          Starting Remount Root and Kernel File Systems...
511. [    4.056637] systemd[1]: Created slice system-serial\x2dgetty.slice.
512. [  OK  ] Created slice system-serial\x2dgetty.slice.
513. [    4.062877] systemd[1]: Reached target Swap.
514. [  OK  ] Reached target Swap.
515. [    4.072367] systemd[1]: Created slice User and Session Slice.
516. [  OK  ] Created slice User and Session Slice.
517. [    4.078846] systemd[1]: Reached target Slices.
518. [  OK  ] Reached target Slices.
519. [    4.086635] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
520. [    4.091607] systemd[1]: Mounting POSIX Message Queue File System...
521.          Mounting POSIX Message Queue File System...
522. [    4.093816] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
523. [  OK  ] Started Forward Password Requests to Wall Directory Watch.
524. [    4.102623] systemd[1]: Reached target Paths.
525. [  OK  ] Reached target Paths.
526. [    4.111082] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
527. [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
528. [    4.118739] systemd[1]: Reached target Local Encrypted Volumes.
529. [  OK  ] Reached target Local Encrypted Volumes.
530. [    4.130428] systemd[1]: Starting udev Coldplug all Devices...
531.          Starting udev Coldplug all Devices...
532. [    4.143920] systemd[1]: Started Create list of required static device nodes for the current kernel.
533. [  OK  ] Started Create list of required sta��…vice nodes for the current kernel.
534. [    4.152236] systemd[1]: Mounted Kernel Debug File System.
535. [  OK  ] Mounted Kernel Debug File System.
536. [    4.159353] systemd[1]: Mounted Huge Pages File System.
537. [  OK  ] Mounted Huge Pages File System.
538. [    4.163134] systemd[1]: Started Load Kernel Modules.
539. [  OK  ] Started Load Kernel Modules.
540. [    4.172295] systemd[1]: Started Remount Root and Kernel File Systems.
541. [  OK  ] Started Remount Root and Kernel File Systems.
542. [    4.179777] systemd[1]: Mounted POSIX Message Queue File System.
543. [  OK  ] Mounted POSIX Message Queue File System.
544. [    4.194554] systemd[1]: Starting Load/Save Random Seed...
545.          Starting Load/Save Random Seed...
546. [    4.207189] systemd[1]: Mounting FUSE Control File System...
547.          Mounting FUSE Control File System...
548. [    4.219485] systemd[1]: Starting Apply Kernel Variables...
549.          Starting Apply Kernel Variables...
550. [    4.231030] systemd[1]: Mounting Kernel Configuration File System...
551.          Mounting Kernel Configuration File System...
552. [    4.238345] systemd[1]: Starting Create Static Device Nodes in /dev...
553.          Starting Create Static Device Nodes in /dev...
554. [    4.251415] systemd[1]: Started Journal Service.
555. [  OK  ] Started Journal Service.
556. [  OK  ] Started Load/Save Random Seed.
557. [  OK  ] Mounted FUSE Control File System.
558. [  OK  ] Started Apply Kernel Variables.
559. [  OK  ] Mounted Kernel Configuration File System.
560.          Starting Flush Journal to Persistent Storage...
561. [  OK  ] Started Create Static Device Nodes in /dev.
562. [  OK  ] Reached target Local File Systems (Pre).
563. [  OK  ] Reached target Local File Systems.
564.          Starting udev Kernel Device Manager...
565. [  OK  ] Started udev Coldplug all Devices.
566. [  OK  ] Started udev Kernel Device Manager.
567. [  OK  ] Reached target Sound Card.
568. [  OK  ] Found device /dev/ttyS0.
569. [  OK  ] Started Flush Journal to Persistent Storage.
570. [  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
571.          Starting Create Volatile Files and Directories...
572.          Starting Load/Save RF Kill Switch Status...
573. [  OK  ] Started Create Volatile Files and Directories.
574.          Starting Network Name Resolution...
575.          Starting Update UTMP about System Boot/Shutdown...
576.          Starting Network Time Synchronization...
577. [  OK  ] Started Update UTMP about System Boot/Shutdown.
578. [  OK  ] Started Load/Save RF Kill Switch Status.
579. [  OK  ] Started Network Name Resolution.
580. [  OK  ] Reached target Host and Network Name Lookups.
581. [  OK  ] Started Network Time Synchronization.
582. [  OK  ] Reached target System Time Synchronized.
583. [  OK  ] Reached target System Initialization.
584. [  OK  ] Started Discard unused blocks once a week.
585. [  OK  ] Started Daily apt download activities.
586. [  OK  ] Listening on D-Bus System Message Bus Socket.
587. [  OK  ] Reached target Sockets.
588. [  OK  ] Reached target Basic System.
589.          Starting Install HCI UART Module...
590.          Starting Bluetooth service...
591. [  OK  ] Started Set the CPU Frequency Scaling governor.
592. [  OK  ] Started D-Bus System Message Bus.
593.          Starting Network Manager...
594.          Starting WPA supplicant...
595. [  OK  ] Started Message of the Day.
596. [  OK  ] Started Daily apt upgrade and clean activities.
597.          Starting Login Service...
598. [  OK  ] Started Daily Cleanup of Temporary Directories.
599. [  OK  ] Reached target Timers.
600. [  OK  ] Started Install HCI UART Module.
601. [  OK  ] Started Bluetooth service.
602.          Starting Hostname Service...
603.          Starting Load RTL8723DS Bluetooth firmware...
604. [  OK  ] Started Login Service.
605. [  OK  ] Started Hostname Service.
606. [  OK  ] Started WPA supplicant.
607. [  OK  ] Started Load RTL8723DS Bluetooth firmware.
608. [  OK  ] Started Network Manager.
609.          Starting Network Manager Script Dispatcher Service...
610. [  OK  ] Reached target Network.
611.          Starting Permit User Sessions...
612.          Starting Rockchip adb...
613.          Starting OpenBSD Secure Shell server...
614.          Starting /etc/rc.local Compatibility...
615. [  OK  ] Started Permit User Sessions.
616. [  OK  ] Started /etc/rc.local Compatibility.
617. [  OK  ] Reached target Bluetooth.
618. [  OK  ] Started Serial Getty on ttyS0.
619. [  OK  ] Started Getty on tty1.
620. [  OK  ] Reached target Login Prompts.
621. [  OK  ] Started Network Manager Script Dispatcher Service.
622. [  OK  ] Started OpenBSD Secure Shell server.
623.          Starting Authorization Manager...
624. [  OK  ] Started Authorization Manager.
625. [  OK  ] Started Rockchip adb.
626. [  OK  ] Reached target Multi-User System.
627. [  OK  ] Reached target Graphical Interface.
628.          Starting Update UTMP about System Runlevel Changes...
629. [  OK  ] Started Update UTMP about System Runlevel Changes.
630.  
631. Ubuntu 18.04 LTS rockpis ttyS0
632.  
633. rockpis login:
634.