# Zestawiamy GRE
/interface gre add local-address=IP_EXT_A name=gre-mpls remote-address=IP_EXT_B
# doadajemy adresację P2P po GRE
/ip address add address=IP_INT_GREA interface=gre-mpls network=10.3.2.4
# właczymy IPSEC dla ruchu po tunelu GRE
/ip ipsec peer add address=IP_INT_GREB dh-group=modp1024 enc-algorithm=aes-128 nat-traversal=no secret=dupa.8dupa.8
/ip ipsec policy add dst-address=IP_INT_GREB/32 sa-dst-address=IP_INT_GREB sa-src-address=IP_INT_GREA src-address=IP_INT_GREA tunnel=yes

## BGP dla łaczności bez interfejsów loopback
/routing bgp peer add address-families=l2vpn,vpnv4 multihop=yes name=bgp-mpls remote-address=IP_INT_GREB remote-as=65518 update-source=gre-mpls


## podniesienie VPLS
/interface vpls add name=vpls-do-A remote-peer=IP_INT_GREB vpls-id=1:1