By Jeff Sawyer on January 28, 2010 Plastic laminate countertops are cost-effective, durable, easy to clean, come in a wide array of designs, and most importantly are relatively simple to install yourself. Here are some pointers on how to cut a laminate counter to fit your requirement. Tools You will wish to gather the following products: Jigsaw (saber saw) with a "down cut" blade minimum of 10 teeth/inch Circular saw with a thin kerf (space left by cut of blade) carbide blade with 60 teeth Sanding block/Belt sander with 220 grit sandpaper Portable drill As always, eye protection Cutting to Fit You can purchase laminate countertops in stock sizes that come in two foot periods between 4 and 12 feet.
However fear not, cutting the counter to fit is not a terribly hard chore. As a matter of truth, frequently the retailer will have end trim pieces of matching laminate to glue on after you make a cut. Here are the actions to get a clean cut off of your counter.
Adhere a strip of masking tape on the counter where your cut will be to secure the laminate from breaking. Lay a second piece of masking tape so the shoe to your saw will rest on the two strips of tape and safeguard the counter from being scratched. With a carpenter's square mark your cutting line onto the first piece of masking tape.
You will wish to clamp a 12 to use as a rip fence. Utilize this measurement so that the saw rests versus the fence and the blade is lined up with your mark. add 1/16th of an inch to your measurement so that your cut is really a little large of the mark.
Set the depth of your blade to 1/8th inch deeper than the thickest part of the counter. Constantly get https://andrea-yokezy.blogspot.com up to complete speed before initiating your cut. Another recommendation is to do a practice cut into the waste side of the counter so you can get a feel for it.