stulluk ~ $ sudo minicom rockpiS Welcome to minicom 2.7.1 OPTIONS: I18n Compiled on Aug 13 2017, 15:25:34. Port /dev/ttyUSB0, 13:36:46 Press CTRL-A Z for help on special keys DDR Version V1.26 REGFB: 0x00000032, 0x00000032 In 589MHz DDR3 Col=10 Bank=8 Row=15 Size=512MB msch:1 Returning to boot ROM... INFO: Preloader serial: 0 NOTICE: BL31: v1.3(release):3a579d3 NOTICE: BL31: Built : 09:09:17, Jan 29 2019 INFO: Lastlog: last=0x100000, realtime=0x102000, size=0x2000 INFO: ARM GICv2 driver initialized INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 1 INFO: plat_rockchip_pmu_init: pd status 0xe INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x600000 INFO: SPSR = 0x3c9 U-Boot 2017.09-02383-g233a23e3ed (Aug 05 2020 - 08:33:06 +0000), Build: jenkins-linux-build-release-293 Model: Radxa ROCK Pi S PreSerial: 0 DRAM: 510 MiB Relocation Offset is: 1f91c000 vdd_core 1044000 uV vdd-core init 1044000 uV MMC: dwmmc@ff480000: 0, dwmmc@ff490000: 1 Using default environment In: serial@ff0c0000 Out: serial@ff0c0000 Err: serial@ff0c0000 Model: Radxa ROCK Pi S Bootdev(atags): mmc 0 PartType: EFI ## Error: Can't overwrite "serial#" ## Error inserting "serial#" variable, errno=1 get part misc fail -1 boot mode: None CLK: apll 816000 KHz dpll 1300000 KHz vpll0 1179647 KHz vpll1 903167 KHz aclk_bus 185714 KHz hclk_bus 100000 KHz pclk_bus 100000 KHz aclk_peri 185714 KHz hclk_peri 100000 KHz pclk_peri 100000 KHz hclk_audio 98303 KHz pclk_audio 98303 KHz Net: Net Initialization Skipped No ethernet found. Hit key to stop autoboot('CTRL+C'): 0 starting USB... USB0: Core Release: 3.10a USB1: USB EHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Device 0: unknown device switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr reading /boot.scr 2641 bytes read in 2 ms (1.3 MiB/s) ## Executing script at 00500000 Boot script loaded from mmc 0 reading /uEnv.txt 317 bytes read in 1 ms (309.6 KiB/s) reading /initrd.img-4.4.143-55-rockchip-g6b7accbc999b 6476851 bytes read in 278 ms (22.2 MiB/s) reading /vmlinuz-4.4.143-55-rockchip-g6b7accbc999b 10663944 bytes read in 455 ms (22.4 MiB/s) reading /dtbs/4.4.143-55-rockchip-g6b7accbc999b/rockchip/rk3308-rock-pi-s.dtb 63554 bytes read in 7 ms (8.7 MiB/s) reading /dtbs/4.4.143-55-rockchip-g6b7accbc999b/rockchip/overlay/rk3308-uart0.dtbo 382 bytes read in 9 ms (41 KiB/s) Applying kernel provided DT overlay rk3308-uart0.dtbo reading /dtbs/4.4.143-55-rockchip-g6b7accbc999b/rockchip/overlay/rockchip-fixup.scr 1814 bytes read in 9 ms (196.3 KiB/s) Applying kernel provided DT fixup script (rockchip-fixup.scr) ## Executing script at 05000000 initrdsize = 0x62d433 ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 reserving fdt memory region: addr=1f00000 size=75000 Loading Ramdisk to 1eede000, end 1f50b433 ... OK Loading Device Tree to 000000001ee66000, end 000000001eeddfff ... OK Adding bank: 0x00200000 - 0x20000000 (size: 0x1fe00000) Starting kernel ... WARNING: suspend_mode_handler: Not support call: 0x4 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.143-55-rockchip-g6b7accbc999b (root@431768422ca2) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Jul 29 02:54:35 UTC 2020 [ 0.000000] Boot CPU: AArch64 Processor [410fd042] [ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc01ff56000 s40344 r8192 d29288 u77824 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128520 [ 0.000000] Kernel command line: initrd=initrd.img-4.4.143-55-rockchip-g6b7accbc999b root=UUID=e6cc3977-ae0c-4340-9b51-66197ebac83d rootwait rw rootfstype=ext4 console=tty1 console=ttyS0,1500000n8 panic=10 consoleblank=0 loglevel=7 [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] software IO TLB [mem 0x19e66000-0x1de66000] (64MB) mapped at [ffffffc019e66000-ffffffc01de65fff] [ 0.000000] Memory: 428812K/522240K available (6910K kernel code, 558K rwdata, 2492K rodata, 384K init, 522K bss, 93428K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB) [ 0.000000] .init : 0xffffff80089c0000 - 0xffffff8008a20000 ( 384 KB) [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008740000 ( 6912 KB) [ 0.000000] .rodata : 0xffffff8008740000 - 0xffffff80089c0000 ( 2560 KB) [ 0.000000] .data : 0xffffff8008a20000 - 0xffffff8008aab808 ( 559 KB) [ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB) [ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB) [ 0.000000] memory : 0xffffffc000200000 - 0xffffffc020000000 ( 510 MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] NR_IRQS:64 nr_irqs:64 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001028] Console: colour dummy device 80x25 [ 0.002540] console [tty1] enabled [ 0.002596] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002674] pid_max: default: 32768 minimum: 301 [ 0.002795] Security Framework initialized [ 0.002841] AppArmor: AppArmor disabled by boot time parameter [ 0.002942] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.002990] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.003835] Initializing cgroup subsys io [ 0.003895] Initializing cgroup subsys memory [ 0.003963] Initializing cgroup subsys devices [ 0.004009] Initializing cgroup subsys freezer [ 0.004056] Initializing cgroup subsys net_cls [ 0.004100] Initializing cgroup subsys perf_event [ 0.004147] Initializing cgroup subsys net_prio [ 0.004200] Initializing cgroup subsys hugetlb [ 0.004244] Initializing cgroup subsys pids [ 0.004613] sched-energy: CPU device node has no sched-energy-costs [ 0.004664] Invalid sched_group_energy for CPU0 [ 0.004704] CPU0: update cpu_capacity 1024 [ 0.004791] ASID allocator initialised with 65536 entries [ 0.039876] Detected VIPT I-cache on CPU1 [ 0.039937] Invalid sched_group_energy for CPU1 [ 0.039941] CPU1: update cpu_capacity 1024 [ 0.039947] CPU1: Booted secondary processor [410fd042] [ 0.051900] Detected VIPT I-cache on CPU2 [ 0.051942] Invalid sched_group_energy for CPU2 [ 0.051946] CPU2: update cpu_capacity 1024 [ 0.051951] CPU2: Booted secondary processor [410fd042] [ 0.063943] Detected VIPT I-cache on CPU3 [ 0.063982] Invalid sched_group_energy for CPU3 [ 0.063986] CPU3: update cpu_capacity 1024 [ 0.063991] CPU3: Booted secondary processor [410fd042] [ 0.064071] Brought up 4 CPUs [ 0.064516] SMP: Total of 4 processors activated. [ 0.064562] CPU: All CPU(s) started at EL2 [ 0.064747] Invalid sched_group_energy for CPU3 [ 0.064791] Invalid sched_group_energy for Cluster3 [ 0.064830] Invalid sched_group_energy for CPU2 [ 0.064868] Invalid sched_group_energy for Cluster2 [ 0.064907] Invalid sched_group_energy for CPU1 [ 0.064945] Invalid sched_group_energy for Cluster1 [ 0.064982] Invalid sched_group_energy for CPU0 [ 0.065020] Invalid sched_group_energy for Cluster0 [ 0.065696] devtmpfs: initialized [ 0.083471] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.083576] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.084137] pinctrl core: initialized pinctrl subsystem [ 0.085432] NET: Registered protocol family 16 [ 0.096107] cpuidle: using governor menu [ 0.096183] Registered FIQ tty driver [ 0.096539] vdso: 2 pages (1 code @ ffffff8008746000, 1 data @ ffffff8008a24000) [ 0.096637] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.096905] DMA: preallocated 256 KiB pool for atomic allocations [ 0.099113] console [pstore-1] enabled [ 0.099158] pstore: Registered ramoops as persistent store backend [ 0.099204] ramoops: attached 0xf0000@0x110000, ecc: 0/0 [ 0.143808] vcc_1v8: regulator get failed, ret=-517 [ 0.144761] vcc_1v8_codec: regulator get failed, ret=-517 [ 0.145609] vcc_1v8: supplied by vcc_io [ 0.145724] vcc_1v8_codec: supplied by vcc_io [ 0.148029] SCSI subsystem initialized [ 0.148735] usbcore: registered new interface driver usbfs [ 0.148853] usbcore: registered new interface driver hub [ 0.149003] usbcore: registered new device driver usb [ 0.149202] media: Linux media interface: v0.10 [ 0.149294] Linux video capture interface: v2.00 [ 0.149444] pps_core: LinuxPPS API ver. 1 registered [ 0.149488] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.149584] PTP clock support registered [ 0.150825] Advanced Linux Sound Architecture Driver Initialized. [ 0.151599] Bluetooth: Core ver 2.21 [ 0.151686] NET: Registered protocol family 31 [ 0.151727] Bluetooth: HCI device and connection manager initialized [ 0.151781] Bluetooth: HCI socket layer initialized [ 0.151828] Bluetooth: L2CAP socket layer initialized [ 0.151900] Bluetooth: SCO socket layer initialized [ 0.152550] NetLabel: Initializing [ 0.152602] NetLabel: domain hash size = 128 [ 0.152641] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.152764] NetLabel: unlabeled traffic allowed by default [ 0.153424] rockchip-cpuinfo cpuinfo: Serial : f31a16820b26213b [ 0.154141] clocksource: Switched to clocksource arch_sys_counter [ 0.166695] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ 0.166788] missing polling-delay-passive property [ 0.166830] failed to build thermal zone soc_thermal: -22 [ 0.167233] NET: Registered protocol family 2 [ 0.168034] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.168156] TCP bind hash table entries: 4096 (order: 4, 65536 bytes) [ 0.168279] TCP: Hash tables configured (established 4096 bind 4096) [ 0.168411] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.168473] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.168766] NET: Registered protocol family 1 [ 0.169391] Trying to unpack rootfs image as initramfs... [ 0.655860] Freeing initrd memory: 6324K [ 0.656556] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.660511] audit: initializing netlink subsys (disabled) [ 0.660641] audit: type=2000 audit(0.656:1): initialized [ 0.661537] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.671153] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.672027] fuse init (API version 7.23) [ 0.676776] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 0.677044] io scheduler noop registered [ 0.677099] io scheduler deadline registered (default) [ 0.677333] io scheduler cfq registered [ 0.683086] dma-pl330 ff2c0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.683183] dma-pl330 ff2c0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 [ 0.685607] dma-pl330 ff2d0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 0.685693] dma-pl330 ff2d0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 0.686116] rockchip-pvtm ff000000.grf:pmu-pvtm: failed to get rst 0 pmu [ 0.686359] rockchip-pvtm ff00c000.syscon:pvtm: failed to get rst 0 core [ 0.687950] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled [ 0.690272] console [ttyS0] disabled [ 0.690398] ff0a0000.serial: ttyS0 at MMIO 0xff0a0000 (irq = 11, base_baud = 1500000) is a 16550A [ 0.767792] console [ttyS0] enabled [ 0.769342] ff0e0000.serial: ttyS4 at MMIO 0xff0e0000 (irq = 12, base_baud = 5078125) is a 16550A [ 0.771245] [drm] Initialized drm 1.1.0 20060810 [ 0.774189] Unable to detect cache hierarchy for CPU 0 [ 0.775867] brd: module loaded [ 0.783698] loop: module loaded [ 0.784480] SCSI Media Changer driver v0.25 [ 0.787217] rk_gmac-dwmac ff4e0000.ethernet: clock input or output? (output). [ 0.787911] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: tx_delay. [ 0.788580] rk_gmac-dwmac ff4e0000.ethernet: set tx_delay to 0x30 [ 0.789158] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: rx_delay. [ 0.789826] rk_gmac-dwmac ff4e0000.ethernet: set rx_delay to 0x10 [ 0.790466] rk_gmac-dwmac ff4e0000.ethernet: integrated PHY? (no). [ 0.796329] rk_gmac-dwmac ff4e0000.ethernet: init for RMII [ 0.796971] stmmac - user ID: 0x10, Synopsys ID: 0x35 [ 0.797452] Ring mode enabled [ 0.797754] DMA HW capability register supported [ 0.798196] Normal descriptors [ 0.798549] RX Checksum Offload Engine supported (type 2) [ 0.799065] TX Checksum insertion supported [ 0.799473] Wake-Up On Lan supported [ 0.799887] Enable RX Mitigation via HW Watchdog Timer [ 0.915704] brian phy in rtl8201f_probe [ 0.920999] brian phy in rtl8201f_probe [ 0.924198] libphy: stmmac: probed [ 0.924542] eth%d: PHY ID 001cc816 at 0 IRQ POLL (stmmac-0:00) active [ 0.925147] eth%d: PHY ID 001cc816 at 1 IRQ POLL (stmmac-0:01) [ 0.926883] Rockchip WiFi SYS interface (V1.00) ... [ 0.927795] ff400000.usb supply vusb_d not found, using dummy regulator [ 0.928502] ff400000.usb supply vusb_a not found, using dummy regulator [ 1.154214] dwc2 ff400000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM [ 1.155445] dwc2 ff400000.usb: DWC OTG Controller [ 1.155937] dwc2 ff400000.usb: new USB bus registered, assigned bus number 1 [ 1.156637] dwc2 ff400000.usb: irq 20, io mem 0xff400000 [ 1.157476] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.158122] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.158872] usb usb1: Product: DWC OTG Controller [ 1.159328] usb usb1: Manufacturer: Linux 4.4.143-55-rockchip-g6b7accbc999b dwc2_hsotg [ 1.160086] usb usb1: SerialNumber: ff400000.usb [ 1.161346] hub 1-0:1.0: USB hub found [ 1.161759] hub 1-0:1.0: 1 port detected [ 1.385633] phy phy-ff008000.syscon:usb2-phy@100.0: charger = USB_SDP_CHARGER [ 1.386471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.387100] ehci-platform: EHCI generic platform driver [ 1.391438] ehci-platform ff440000.usb: EHCI Host Controller [ 1.392233] ehci-platform ff440000.usb: new USB bus registered, assigned bus number 2 [ 1.393123] ehci-platform ff440000.usb: irq 21, io mem 0xff440000 [ 1.402200] ehci-platform ff440000.usb: USB 2.0 started, EHCI 1.00 [ 1.402992] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.403635] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.404332] usb usb2: Product: EHCI Host Controller [ 1.404802] usb usb2: Manufacturer: Linux 4.4.143-55-rockchip-g6b7accbc999b ehci_hcd [ 1.405543] usb usb2: SerialNumber: ff440000.usb [ 1.406727] hub 2-0:1.0: USB hub found [ 1.407135] hub 2-0:1.0: 1 port detected [ 1.408117] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.408735] ohci-platform: OHCI generic platform driver [ 1.409612] ohci-platform ff450000.usb: Generic Platform OHCI controller [ 1.410557] ohci-platform ff450000.usb: new USB bus registered, assigned bus number 3 [ 1.411477] ohci-platform ff450000.usb: irq 22, io mem 0xff450000 [ 1.470382] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.471029] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.471726] usb usb3: Product: Generic Platform OHCI controller [ 1.472290] usb usb3: Manufacturer: Linux 4.4.143-55-rockchip-g6b7accbc999b ohci_hcd [ 1.473032] usb usb3: SerialNumber: ff450000.usb [ 1.474225] hub 3-0:1.0: USB hub found [ 1.474638] hub 3-0:1.0: 1 port detected [ 1.477137] i2c /dev entries driver [ 1.477968] usbcore: registered new interface driver uvcvideo [ 1.478549] USB Video Class driver (1.1.1) [ 1.481267] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=2147483647 [ 1.482453] rockchip-thermal ff1f0000.tsadc: tsadc is probed successfully! [ 1.484492] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.485328] Bluetooth: Virtual HCI driver ver 1.5 [ 1.486311] cpu cpu0: leakage=9 [ 1.486907] cpu cpu0: Failed to get pvtm [ 1.488549] cpu cpu0: l=0 h=55000 hyst=5000 l_limit=1200000000 h_limit=1008000000 [ 1.490765] Synopsys Designware Multimedia Card Interface Driver [ 1.492477] dwmmc_rockchip ff480000.dwmmc: IDMAC supports 32-bit address mode. [ 1.493225] dwmmc_rockchip ff480000.dwmmc: Using internal DMA controller. [ 1.493875] dwmmc_rockchip ff480000.dwmmc: Version ID is 270a [ 1.494544] dwmmc_rockchip ff480000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo [ 1.510327] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.527301] dwmmc_rockchip ff480000.dwmmc: 1 slots initialized [ 1.530295] dwmmc_rockchip ff490000.dwmmc: IDMAC supports 32-bit address mode. [ 1.531057] dwmmc_rockchip ff490000.dwmmc: Using internal DMA controller. [ 1.532741] dwmmc_rockchip ff490000.dwmmc: Version ID is 270a [ 1.535379] dwmmc_rockchip ff490000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo [ 1.536390] dwmmc_rockchip ff490000.dwmmc: No vmmc regulator found [ 1.537002] dwmmc_rockchip ff490000.dwmmc: No vqmmc regulator found [ 1.550258] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.560135] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.561124] mmc0: new high speed SDHC card at address 5048 [ 1.562707] mmcblk0: mmc0:5048 SD16G 14.4 GiB [ 1.567301] dwmmc_rockchip ff490000.dwmmc: 1 slots initialized [ 1.568924] dwmmc_rockchip ff4a0000.dwmmc: num-slots property not found, assuming 1 slot is available [ 1.570051] dwmmc_rockchip ff4a0000.dwmmc: IDMAC supports 32-bit address mode. [ 1.571050] dwmmc_rockchip ff4a0000.dwmmc: Using internal DMA controller. [ 1.571930] mmcblk0: p1 p2 [ 1.572499] dwmmc_rockchip ff4a0000.dwmmc: Version ID is 270a [ 1.573767] dwmmc_rockchip ff4a0000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo [ 1.574823] dwmmc_rockchip ff4a0000.dwmmc: No vmmc regulator found [ 1.575411] dwmmc_rockchip ff4a0000.dwmmc: No vqmmc regulator found [ 1.576533] dwmmc_rockchip ff4a0000.dwmmc: allocated mmc-pwrseq [ 1.590377] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 1.604046] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) [ 1.605064] mmc1: new SD card at address 2139 [ 1.606303] dwmmc_rockchip ff4a0000.dwmmc: 1 slots initialized [ 1.609179] hidraw: raw HID events driver (C) Jiri Kosina [ 1.610608] mmcblk1: mmc1:2139 XTSDA 990 MiB [ 1.610945] usbcore: registered new interface driver usbhid [ 1.610947] usbhid: USB HID core driver [ 1.611224] rockchip-dmc dmc: failed to get the count of devfreq-event in /dmc node [ 1.611536] rockchip-dmc dmc: Failed to get leakage [ 1.611620] rockchip-dmc dmc: Failed to get pvtm [ 1.611938] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate [ 1.611946] rockchip-dmc dmc: failed to get vop pn to msch rl [ 1.611954] rockchip-dmc dmc: don't add devfreq feature [ 1.613124] dwmmc_rockchip ff4a0000.dwmmc: card claims to support voltages below defined range [ 1.614223] rknandc_base v1.1 2017-01-11 [ 1.614495] rksfc_base v1.1 2016-01-08 [ 1.618513] mmcblk1: p1 [ 1.619722] dummy_codec dummy-codec: Unable to get mclk [ 1.620939] rk3308-acodec ff560000.acodec: Don't need hp-ctl gpio [ 1.621647] rk3308-acodec ff560000.acodec: Don't need spk-ctl gpio [ 1.622389] rk3308-acodec ff560000.acodec: Don't need pa-drv gpio [ 1.623002] rk3308-acodec ff560000.acodec: De-pop as much as possible [ 1.623758] The acodec version is: a [ 1.625948] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.628086] mmc2: new high speed SDIO card at address 0001 [ 1.683855] rk-multicodecs acodec-sound: rk3308-hifi <-> ff320000.i2s mapping ok [ 1.685935] input: rockchip,rk3308-acodec Headphones as /devices/platform/acodec-sound/sound/card1/input0 [ 1.687722] u32 classifier [ 1.688020] Netfilter messages via NETLINK v0.30. [ 1.688539] ip_set: protocol 6 [ 1.689078] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.689600] Initializing XFRM netlink socket [ 1.690642] NET: Registered protocol family 10 [ 1.692401] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.692942] NET: Registered protocol family 17 [ 1.693386] NET: Registered protocol family 15 [ 1.693851] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.694335] rk3308-acodec ff560000.acodec: Don't need to change dac_output: 0 [ 1.696602] Bridge firewalling registered [ 1.697241] Bluetooth: RFCOMM TTY layer initialized [ 1.697719] Bluetooth: RFCOMM socket layer initialized [ 1.698257] Bluetooth: RFCOMM ver 1.11 [ 1.698694] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.699316] Bluetooth: HIDP socket layer initialized [ 1.699849] 8021q: 802.1Q VLAN Support v1.8 [ 1.700354] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 1.701665] [WLAN_RFKILL]: Enter rfkill_wlan_probe [ 1.702245] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = rtl8723ds [ 1.702963] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. [ 1.703675] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. [ 1.704611] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 0, flags = 0. [ 1.705618] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio [ 1.706218] [WLAN_RFKILL]: Exit rfkill_wlan_probe [ 1.706847] [BT_RFKILL]: Enter rfkill_rk_init [ 1.708151] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 135. [ 1.709055] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 139. [ 1.709994] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 140. [ 1.710974] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!. [ 1.711666] [BT_RFKILL]: Request irq for bt wakeup host [ 1.712207] [BT_RFKILL]: ** disable irq [ 1.712776] [BT_RFKILL]: bt_default device registered. [ 1.713367] Key type dns_resolver registered [ 1.714441] flash vendor_init_thread! [ 1.714813] flash vendor storage:20170308 ret = -1 [ 1.715598] registered taskstats version 1 [ 1.732550] Key type encrypted registered [ 1.733879] hctosys: unable to open rtc device (rtc0) [ 1.748931] ALSA device list: [ 1.749249] #0: Loopback 1 [ 1.749530] #1: rockchip,rk3308-acodec [ 1.750752] Freeing unused kernel memory: 384K Loading, please wait... starting version 237 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... done. Warning: fsck not present, so skipping root file system [ 2.636328] EXT4-fs (mmcblk0p2): recovery complete [ 2.638694] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 3.283164] systemd[1]: System time before build time, advancing clock. [ 3.289386] cgroup: cgroup2: unknown option "nsdelegate" [ 3.306297] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 3.309718] systemd[1]: Detected architecture arm64. Welcome to Ubuntu 18.04 LTS! [ 3.336206] systemd[1]: Set hostname to . [ 3.558292] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 3.560052] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 3.876999] random: systemd: uninitialized urandom read (16 bytes read, 62 bits of entropy available) [ 3.880301] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 3.882929] random: systemd: uninitialized urandom read (16 bytes read, 62 bits of entropy available) [ 3.884559] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 3.894649] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available) [ 3.896026] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 3.898748] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available) [ 3.900466] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab��…rmats File System Automount Point. [ 3.903051] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available) [ 3.904418] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 3.914568] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available) [ 3.916208] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.922678] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available) [ 3.925618] systemd[1]: Set up automount boot.automount. [ OK ] Set up automount boot.automount. [ 3.934632] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available) [ 3.935674] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.942679] random: systemd: uninitialized urandom read (16 bytes read, 63 bits of entropy available) [ 3.944384] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.957808] random: systemd: uninitialized urandom read (16 bytes read, 64 bits of entropy available) [ 3.964158] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st��…ce nodes for the current kernel... [ 3.975899] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 3.985197] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 4.003023] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 4.022380] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 4.038363] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.043241] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 4.052991] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 4.056637] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 4.062877] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 4.072367] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 4.078846] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.086635] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 4.091607] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 4.093816] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 4.102623] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 4.111082] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 4.118739] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 4.130428] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... [ 4.143920] systemd[1]: Started Create list of required static device nodes for the current kernel. [ OK ] Started Create list of required sta��…vice nodes for the current kernel. [ 4.152236] systemd[1]: Mounted Kernel Debug File System. [ OK ] Mounted Kernel Debug File System. [ 4.159353] systemd[1]: Mounted Huge Pages File System. [ OK ] Mounted Huge Pages File System. [ 4.163134] systemd[1]: Started Load Kernel Modules. [ OK ] Started Load Kernel Modules. [ 4.172295] systemd[1]: Started Remount Root and Kernel File Systems. [ OK ] Started Remount Root and Kernel File Systems. [ 4.179777] systemd[1]: Mounted POSIX Message Queue File System. [ OK ] Mounted POSIX Message Queue File System. [ 4.194554] systemd[1]: Starting Load/Save Random Seed... Starting Load/Save Random Seed... [ 4.207189] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... [ 4.219485] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 4.231030] systemd[1]: Mounting Kernel Configuration File System... Mounting Kernel Configuration File System... [ 4.238345] systemd[1]: Starting Create Static Device Nodes in /dev... Starting Create Static Device Nodes in /dev... [ 4.251415] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Load/Save Random Seed. [ OK ] Mounted FUSE Control File System. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted Kernel Configuration File System. Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting udev Kernel Device Manager... [ OK ] Started udev Coldplug all Devices. [ OK ] Started udev Kernel Device Manager. [ OK ] Reached target Sound Card. [ OK ] Found device /dev/ttyS0. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Create Volatile Files and Directories... Starting Load/Save RF Kill Switch Status... [ OK ] Started Create Volatile Files and Directories. Starting Network Name Resolution... Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Reached target System Initialization. [ OK ] Started Discard unused blocks once a week. [ OK ] Started Daily apt download activities. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Install HCI UART Module... Starting Bluetooth service... [ OK ] Started Set the CPU Frequency Scaling governor. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting WPA supplicant... [ OK ] Started Message of the Day. [ OK ] Started Daily apt upgrade and clean activities. Starting Login Service... [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Started Install HCI UART Module. [ OK ] Started Bluetooth service. Starting Hostname Service... Starting Load RTL8723DS Bluetooth firmware... [ OK ] Started Login Service. [ OK ] Started Hostname Service. [ OK ] Started WPA supplicant. [ OK ] Started Load RTL8723DS Bluetooth firmware. [ OK ] Started Network Manager. Starting Network Manager Script Dispatcher Service... [ OK ] Reached target Network. Starting Permit User Sessions... Starting Rockchip adb... Starting OpenBSD Secure Shell server... Starting /etc/rc.local Compatibility... [ OK ] Started Permit User Sessions. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Reached target Bluetooth. [ OK ] Started Serial Getty on ttyS0. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started OpenBSD Secure Shell server. Starting Authorization Manager... [ OK ] Started Authorization Manager. [ OK ] Started Rockchip adb. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. Ubuntu 18.04 LTS rockpis ttyS0 rockpis login: