[  667.769321] reboot: Restarting system
INFO:    PSCI Power Domain Map:
INFO:      Domain Node : Level 2, parent_node -1, State ON (0x0)
INFO:      Domain Node : Level 1, parent_node 0, State ON (0x0)
INFO:      Domain Node : Level 0, parent_node 0, State ON (0x0)
INFO:      Domain Node : Level 0, parent_node 0, State ON (0x0)
INFO:      CPU Node : MPID 0x0, parent_node 1, State ON (0x0)
INFO:      CPU Node : MPID 0x1, parent_node 1, State ON (0x0)
INFO:      CPU Node : MPID 0x2, parent_node 1, State ON (0x0)
INFO:      CPU Node : MPID 0x3, parent_node 1, State ON (0x0)

DDR Version V1.26
REGFB: 0x00000032, 0x00000032
In
589MHz
DDR3
 Col=10 Bank=8 Row=15 Size=512MB
msch:1
Returning to boot ROM...
Boot1 Release Time: Jul 17 2019 17:31:26, version: 1.14
chip_id:330800,0
ChipType = 0x13, 35790979
DPLL = 1300 MHz
sfc_ver 3
sfc nor id: ff ff ff
sfc_nand_init
DPLL = 1300 MHz
sfc_ver 3
sfc_nand id: ff ff ff
DPLL = 1300 MHz
NeedKHz=200KHz,clock=12000KHz
NeedKHz=200KHz,clock=12000KHz
NeedKHz=200KHz,clock=12000KHz
mmc2:cmd5,20
DPLL = 1300 MHz
NeedKHz=24000KHz,clock=650000KHz
DPLL = 1300 MHz
NeedKHz=40000KHz,clock=650000KHz
SdmmcInit=2 0
BootCapSize=0
UserCapSize=964MB
FwPartOffset=2000 , 0
NeedKHz=200KHz,clock=12000KHz
NeedKHz=200KHz,clock=12000KHz
NeedKHz=200KHz,clock=12000KHz
mmc0:cmd5,20
DPLL = 1300 MHz
NeedKHz=24000KHz,clock=650000KHz
DPLL = 1300 MHz
NeedKHz=40000KHz,clock=650000KHz
SdmmcInit=0 0
BootCapSize=0
UserCapSize=14768MB
FwPartOffset=2000 , 0
StorageInit ok = 35742776
SecureMode = 0
Secure read PBA: 0x4
Secure read PBA: 0x404
Secure read PBA: 0x804
Secure read PBA: 0xc04
Secure read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:             boot, start:0x8000, size:0x38000
GPT part:  1, name:           rootfs, start:0x40000, size:0x1c97fdf
no find partition:uboot.
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x600000, size=0x9a498
RunBL31 0x10000
INFO:    Preloader serial: 0
NOTICE:  BL31: v1.3(release):3a579d3
NOTICE:  BL31: Built : 09:09:17, Jan 29 2019
INFO:    Lastlog: last=0x100000, realtime=0x102000, size=0x2000
INFO:    ARM GICv2 driver initialized
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 1
INFO:    plat_rockchip_pmu_init: pd status 0xe b
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x600000
INFO:    SPSR = 0x3c9


U-Boot 2017.09 (Sep 20 2020 - 12:35:35 +0000)

Model: Radxa ROCK Pi S
PreSerial: 0
DRAM:  510 MiB
Relocation Offset is: 1f91c000
vdd_core 1044000 uV
vdd-core init 1044000 uV
MMC:   dwmmc@ff480000: 0, dwmmc@ff490000: 1
Using default environment

In:    serial@ff0c0000
Out:   serial@ff0c0000
Err:   serial@ff0c0000
Model: Radxa ROCK Pi S
Bootdev(atags): mmc 0
PartType: EFI
## Error: Can't overwrite "serial#"
## Error inserting "serial#" variable, errno=1
get part misc fail -1
boot mode: normal
CLK:
apll 816000 KHz
dpll 1300000 KHz
vpll0 1179647 KHz
vpll1 903167 KHz
aclk_bus 185714 KHz
hclk_bus 100000 KHz
pclk_bus 100000 KHz
aclk_peri 185714 KHz
hclk_peri 100000 KHz
pclk_peri 100000 KHz
hclk_audio 98303 KHz
pclk_audio 98303 KHz
Net:   Net Initialization Skipped
No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0 
starting USB...
USB0:   Core Release: 3.10a
USB1:   USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found

Device 0: unknown device
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
reading /boot.scr
2300 bytes read in 3 ms (748 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 0
reading /uEnv.txt
149 bytes read in 2 ms (72.3 KiB/s)
reading /Image
11974664 bytes read in 509 ms (22.4 MiB/s)
reading /rk3308-rock-pi-s.dtb
63554 bytes read in 5 ms (12.1 MiB/s)
reading /overlays/rk3308-uart0.dtbo
382 bytes read in 3 ms (124 KiB/s)
Applying kernel provided DT overlay rk3308-uart0.dtbo
reading /overlays/rockchip-fixup.scr
1814 bytes read in 3 ms (589.8 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 05000000
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   reserving fdt memory region: addr=1f00000 size=75000
   Loading Device Tree to 000000001f493000, end 000000001f50afff ... OK
Adding bank: 0x00200000 - 0x20000000 (size: 0x1fe00000)

Starting kernel ...


WARNING: suspend_mode_handler: Not support call: 0x4
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.143 (oe-user@oe-host) (gcc version 9.2.0 (GCC) ) #1 SMP PREEMPT Sun Sep 20 10:07:12 UTC 2020
[    0.000000] Boot CPU: AArch64 Processor [410fd042]
[    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc01ff56000 s40344 r8192 d29288 u77824
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128520
[    0.000000] Kernel command line: console=tty1 console=ttyS0,1500000n8 rw root=PARTUUID=b921b045-1df0-41c3-af44-4c6f280d3fae rootfstt
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] software IO TLB [mem 0x1a493000-0x1e493000] (64MB) mapped at [ffffffc01a493000-ffffffc01e492fff]
[    0.000000] Memory: 433868K/522240K available (6846K kernel code, 558K rwdata, 3864K rodata, 384K init, 521K bss, 88372K reserved, )
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8008b00000 - 0xffffff8008b60000   (   384 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008730000   (  6848 KB)
[    0.000000]     .rodata : 0xffffff8008730000 - 0xffffff8008b00000   (  3904 KB)
[    0.000000]       .data : 0xffffff8008b60000 - 0xffffff8008beb808   (   559 KB)
[    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc020000000   (   510 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001058] Console: colour dummy device 80x25
[    0.002499] console [tty1] enabled
[    0.002551] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.002631] pid_max: default: 32768 minimum: 301
[    0.002751] Security Framework initialized
[    0.002799] AppArmor: AppArmor disabled by boot time parameter
[    0.002899] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.002946] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.003782] Initializing cgroup subsys io
[    0.003843] Initializing cgroup subsys memory
[    0.003908] Initializing cgroup subsys devices
[    0.003956] Initializing cgroup subsys freezer
[    0.004001] Initializing cgroup subsys net_cls
[    0.004047] Initializing cgroup subsys perf_event
[    0.004094] Initializing cgroup subsys net_prio
[    0.004147] Initializing cgroup subsys hugetlb
[    0.004191] Initializing cgroup subsys pids
[    0.004560] sched-energy: CPU device node has no sched-energy-costs
[    0.004610] Invalid sched_group_energy for CPU0
[    0.004649] CPU0: update cpu_capacity 1024
[    0.004731] ASID allocator initialised with 65536 entries
[    0.039876] Detected VIPT I-cache on CPU1
[    0.039936] Invalid sched_group_energy for CPU1
[    0.039941] CPU1: update cpu_capacity 1024
[    0.039946] CPU1: Booted secondary processor [410fd042]
[    0.051899] Detected VIPT I-cache on CPU2
[    0.051940] Invalid sched_group_energy for CPU2
[    0.051944] CPU2: update cpu_capacity 1024
[    0.051948] CPU2: Booted secondary processor [410fd042]
[    0.063942] Detected VIPT I-cache on CPU3
[    0.063978] Invalid sched_group_energy for CPU3
[    0.063982] CPU3: update cpu_capacity 1024
[    0.063986] CPU3: Booted secondary processor [410fd042]
[    0.064069] Brought up 4 CPUs
[    0.064517] SMP: Total of 4 processors activated.
[    0.064563] CPU: All CPU(s) started at EL2
[    0.064748] Invalid sched_group_energy for CPU3
[    0.064794] Invalid sched_group_energy for Cluster3
[    0.064832] Invalid sched_group_energy for CPU2
[    0.064869] Invalid sched_group_energy for Cluster2
[    0.064908] Invalid sched_group_energy for CPU1
[    0.064945] Invalid sched_group_energy for Cluster1
[    0.064984] Invalid sched_group_energy for CPU0
[    0.065021] Invalid sched_group_energy for Cluster0
[    0.065700] devtmpfs: initialized
[    0.083750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.083856] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.084447] pinctrl core: initialized pinctrl subsystem
[    0.085728] NET: Registered protocol family 16
[    0.096097] cpuidle: using governor menu
[    0.096184] Registered FIQ tty driver
[    0.096517] vdso: 2 pages (1 code @ ffffff8008736000, 1 data @ ffffff8008b64000)
[    0.096614] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.096889] DMA: preallocated 256 KiB pool for atomic allocations
[    0.100129] console [pstore-1] enabled
[    0.100173] pstore: Registered ramoops as persistent store backend
[    0.100220] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.139809] vcc_1v8: regulator get failed, ret=-517
[    0.140728] vcc_1v8_codec: regulator get failed, ret=-517
[    0.141582] vcc_1v8: supplied by vcc_io
[    0.141700] vcc_1v8_codec: supplied by vcc_io
[    0.143990] SCSI subsystem initialized
[    0.144682] usbcore: registered new interface driver usbfs
[    0.144794] usbcore: registered new interface driver hub
[    0.144943] usbcore: registered new device driver usb
[    0.145139] media: Linux media interface: v0.10
[    0.145229] Linux video capture interface: v2.00
[    0.145390] pps_core: LinuxPPS API ver. 1 registered
[    0.145432] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.145527] PTP clock support registered
[    0.146804] Advanced Linux Sound Architecture Driver Initialized.
[    0.147620] Bluetooth: Core ver 2.21
[    0.147708] NET: Registered protocol family 31
[    0.147751] Bluetooth: HCI device and connection manager initialized
[    0.147805] Bluetooth: HCI socket layer initialized
[    0.147853] Bluetooth: L2CAP socket layer initialized
[    0.147921] Bluetooth: SCO socket layer initialized
[    0.148599] NetLabel: Initializing
[    0.148647] NetLabel:  domain hash size = 128
[    0.148686] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.148800] NetLabel:  unlabeled traffic allowed by default
[    0.149428] rockchip-cpuinfo cpuinfo: Serial         : 880b55f3e85ace4e
[    0.150051] clocksource: Switched to clocksource arch_sys_counter
[    0.162781] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.162875] missing polling-delay-passive property
[    0.162916] failed to build thermal zone soc_thermal: -22
[    0.163289] NET: Registered protocol family 2
[    0.164085] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.164191] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[    0.164313] TCP: Hash tables configured (established 4096 bind 4096)
[    0.164446] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.164509] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.164804] NET: Registered protocol family 1
[    0.165998] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.170204] audit: initializing netlink subsys (disabled)
[    0.170344] audit: type=2000 audit(0.168:1): initialized
[    0.171197] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.180826] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.181700] fuse init (API version 7.23)
[    0.186696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.186965] io scheduler noop registered
[    0.187019] io scheduler deadline registered (default)
[    0.187252] io scheduler cfq registered
[    0.192827] dma-pl330 ff2c0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.192926] dma-pl330 ff2c0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.195400] dma-pl330 ff2d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.195492] dma-pl330 ff2d0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.195913] rockchip-pvtm ff000000.grf:pmu-pvtm: failed to get rst 0 pmu
[    0.196093] rockchip-pvtm ff00c000.syscon:pvtm: failed to get rst 0 core
[    0.197689] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    0.200120] console [ttyS0] disabled
[    0.200240] ff0a0000.serial: ttyS0 at MMIO 0xff0a0000 (irq = 11, base_baud = 1500000) is a 16550A
[    0.275331] console [ttyS0] enabled
[    0.276831] ff0e0000.serial: ttyS4 at MMIO 0xff0e0000 (irq = 12, base_baud = 5078125) is a 16550A
[    0.278749] [drm] Initialized drm 1.1.0 20060810
[    0.281751] Unable to detect cache hierarchy for CPU 0
[    0.283506] brd: module loaded
[    0.291269] loop: module loaded
[    0.292062] SCSI Media Changer driver v0.25 
[    0.294856] rk_gmac-dwmac ff4e0000.ethernet: clock input or output? (output).
[    0.295552] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: tx_delay.
[    0.296223] rk_gmac-dwmac ff4e0000.ethernet: set tx_delay to 0x30
[    0.296799] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: rx_delay.
[    0.297467] rk_gmac-dwmac ff4e0000.ethernet: set rx_delay to 0x10
[    0.298094] rk_gmac-dwmac ff4e0000.ethernet: integrated PHY? (no).
[    0.303936] rk_gmac-dwmac ff4e0000.ethernet: init for RMII
[    0.304586] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    0.305070]  Ring mode enabled
[    0.305372]  DMA HW capability register supported
[    0.305783]  Normal descriptors
[    0.306156]  RX Checksum Offload Engine supported (type 2)
[    0.306673]  TX Checksum insertion supported
[    0.307081]  Wake-Up On Lan supported
[    0.307500]  Enable RX Mitigation via HW Watchdog Timer
[    0.418669] brian phy in rtl8201f_probe 
[    0.419759] brian phy in rtl8201f_probe 
[    0.422904] libphy: stmmac: probed
[    0.423246] eth%d: PHY ID 001cc816 at 0 IRQ POLL (stmmac-0:00) active
[    0.423853] eth%d: PHY ID 001cc816 at 1 IRQ POLL (stmmac-0:01)
[    0.425564] Rockchip WiFi SYS interface (V1.00) ... 
[    0.426515] ff400000.usb supply vusb_d not found, using dummy regulator
[    0.427214] ff400000.usb supply vusb_a not found, using dummy regulator
[    0.658114] dwc2 ff400000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
[    0.659361] dwc2 ff400000.usb: DWC OTG Controller
[    0.659850] dwc2 ff400000.usb: new USB bus registered, assigned bus number 1
[    0.660547] dwc2 ff400000.usb: irq 20, io mem 0xff400000
[    0.661250] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.661894] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.662632] usb usb1: Product: DWC OTG Controller
[    0.663088] usb usb1: Manufacturer: Linux 4.4.143 dwc2_hsotg
[    0.663625] usb usb1: SerialNumber: ff400000.usb
[    0.664841] hub 1-0:1.0: USB hub found
[    0.665254] hub 1-0:1.0: 1 port detected
[    0.889539] phy phy-ff008000.syscon:usb2-phy@100.0: charger = USB_SDP_CHARGER
[    0.890321] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.890945] ehci-platform: EHCI generic platform driver
[    0.895281] ehci-platform ff440000.usb: EHCI Host Controller
[    0.896118] ehci-platform ff440000.usb: new USB bus registered, assigned bus number 2
[    0.897010] ehci-platform ff440000.usb: irq 21, io mem 0xff440000
[    0.906107] ehci-platform ff440000.usb: USB 2.0 started, EHCI 1.00
[    0.906900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.907541] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.908240] usb usb2: Product: EHCI Host Controller
[    0.908707] usb usb2: Manufacturer: Linux 4.4.143 ehci_hcd
[    0.909228] usb usb2: SerialNumber: ff440000.usb
[    0.910473] hub 2-0:1.0: USB hub found
[    0.910894] hub 2-0:1.0: 1 port detected
[    0.911952] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.912602] ohci-platform: OHCI generic platform driver
[    0.913502] ohci-platform ff450000.usb: Generic Platform OHCI controller
[    0.914497] ohci-platform ff450000.usb: new USB bus registered, assigned bus number 3
[    0.915388] ohci-platform ff450000.usb: irq 22, io mem 0xff450000
[    0.974287] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.974929] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.975626] usb usb3: Product: Generic Platform OHCI controller
[    0.976188] usb usb3: Manufacturer: Linux 4.4.143 ohci_hcd
[    0.976709] usb usb3: SerialNumber: ff450000.usb
[    0.977917] hub 3-0:1.0: USB hub found
[    0.978381] hub 3-0:1.0: 1 port detected
[    0.980897] i2c /dev entries driver
[    0.981721] usbcore: registered new interface driver uvcvideo
[    0.982300] USB Video Class driver (1.1.1)
[    0.985072] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=2147483647
[    0.986242] rockchip-thermal ff1f0000.tsadc: tsadc is probed successfully!
[    0.988314] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.989153] Bluetooth: Virtual HCI driver ver 1.5
[    0.990141] cpu cpu0: leakage=8
[    0.990723] cpu cpu0: Failed to get pvtm
[    0.992393] cpu cpu0: l=0 h=55000 hyst=5000 l_limit=1200000000 h_limit=1008000000
[    0.994624] Synopsys Designware Multimedia Card Interface Driver
[    0.996330] dwmmc_rockchip ff480000.dwmmc: IDMAC supports 32-bit address mode.
[    0.997070] dwmmc_rockchip ff480000.dwmmc: Using internal DMA controller.
[    0.997717] dwmmc_rockchip ff480000.dwmmc: Version ID is 270a
[    0.998357] dwmmc_rockchip ff480000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo
[    1.014277] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.031250] dwmmc_rockchip ff480000.dwmmc: 1 slots initialized
[    1.034208] dwmmc_rockchip ff490000.dwmmc: IDMAC supports 32-bit address mode.
[    1.034968] dwmmc_rockchip ff490000.dwmmc: Using internal DMA controller.
[    1.036642] dwmmc_rockchip ff490000.dwmmc: Version ID is 270a
[    1.039271] dwmmc_rockchip ff490000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
[    1.040268] dwmmc_rockchip ff490000.dwmmc: No vmmc regulator found
[    1.040875] dwmmc_rockchip ff490000.dwmmc: No vqmmc regulator found
[    1.054251] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.064305] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    1.065295] mmc0: new high speed SDHC card at address 5048
[    1.070822] mmcblk0: mmc0:5048 SD16G 14.4 GiB 
[    1.071314] dwmmc_rockchip ff490000.dwmmc: 1 slots initialized
[    1.074505] dwmmc_rockchip ff4a0000.dwmmc: num-slots property not found, assuming 1 slot is available
[    1.075653] dwmmc_rockchip ff4a0000.dwmmc: IDMAC supports 32-bit address mode.
[    1.076654] dwmmc_rockchip ff4a0000.dwmmc: Using internal DMA controller.
[    1.077419] dwmmc_rockchip ff4a0000.dwmmc: Version ID is 270a
[    1.078167] dwmmc_rockchip ff4a0000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    1.079345] dwmmc_rockchip ff4a0000.dwmmc: No vmmc regulator found
[    1.080071] dwmmc_rockchip ff4a0000.dwmmc: No vqmmc regulator found
[    1.080892]  mmcblk0: p1 p2
[    1.082754] dwmmc_rockchip ff4a0000.dwmmc: allocated mmc-pwrseq
[    1.098260] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.114293] dwmmc_rockchip ff4a0000.dwmmc: 1 slots initialized
[    1.116074] hidraw: raw HID events driver (C) Jiri Kosina
[    1.116665] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[    1.118000] mmc1: new SD card at address 1388
[    1.118347] usbcore: registered new interface driver usbhid
[    1.118350] usbhid: USB HID core driver
[    1.118648] rockchip-dmc dmc: failed to get the count of devfreq-event in /dmc node
[    1.118954] rockchip-dmc dmc: Failed to get leakage
[    1.119038] rockchip-dmc dmc: Failed to get pvtm
[    1.119344] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[    1.119352] rockchip-dmc dmc: failed to get vop pn to msch rl
[    1.119360] rockchip-dmc dmc: don't add devfreq feature
[    1.121430] rknandc_base v1.1 2017-01-11
[    1.121661] rksfc_base v1.1 2016-01-08
[    1.124342] mmcblk1: mmc1:1388 Stora 964 MiB 
[    1.126785] dummy_codec dummy-codec: Unable to get mclk
[    1.128070] rk3308-acodec ff560000.acodec: Don't need hp-ctl gpio
[    1.128748] rk3308-acodec ff560000.acodec: Don't need spk-ctl gpio
[    1.129425] rk3308-acodec ff560000.acodec: Don't need pa-drv gpio
[    1.129999] rk3308-acodec ff560000.acodec: De-pop as much as possible
[    1.130766] The acodec version is: b
[    1.138248] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
[    1.182178] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[    1.191754] rk-multicodecs acodec-sound: rk3308-hifi <-> ff320000.i2s mapping ok
[    1.193782] input: rockchip,rk3308-acodec Headphones as /devices/platform/acodec-sound/sound/card1/input0
[    1.195529] u32 classifier
[    1.195828] Netfilter messages via NETLINK v0.30.
[    1.196350] ip_set: protocol 6
[    1.196882] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.197407] Initializing XFRM netlink socket
[    1.198439] NET: Registered protocol family 10
[    1.200115] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.200694] NET: Registered protocol family 17
[    1.201145] NET: Registered protocol family 15
[    1.201613] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you n.
[    1.202166] rk3308-acodec ff560000.acodec: Don't need to change dac_output: 0
[    1.204006] Bridge firewalling registered
[    1.204613] Bluetooth: RFCOMM TTY layer initialized
[    1.205092] Bluetooth: RFCOMM socket layer initialized
[    1.205602] Bluetooth: RFCOMM ver 1.11
[    1.205975] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.206567] Bluetooth: HIDP socket layer initialized
[    1.207045] 8021q: 802.1Q VLAN Support v1.8
[    1.207490] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    1.208503] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    1.208979] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = rtl8723ds
[    1.209636] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    1.210386] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    1.211346] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 0, flags = 0.
[    1.212354] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    1.212908] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    1.213542] [BT_RFKILL]: Enter rfkill_rk_init
[    1.214947] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 135.
[    1.215861] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 139.
[    1.216809] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 140.
[    1.217679] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
[    1.218550] [BT_RFKILL]: Request irq for bt wakeup host
[    1.219189] [BT_RFKILL]: ** disable irq
[    1.219936] [BT_RFKILL]: bt_default device registered.
[    1.220646] Key type dns_resolver registered
[    1.221895] flash vendor_init_thread!
[    1.222360] flash vendor storage:20170308 ret = -1
[    1.223777] registered taskstats version 1
[    1.225782] Key type encrypted registered
[    1.227110] hctosys: unable to open rtc device (rtc0)
[    1.230319] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
[    1.241966] ALSA device list:
[    1.242340]   #0: Loopback 1
[    1.242627]   #1: rockchip,rk3308-acodec
[    1.317563] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.318491] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    1.320187] devtmpfs: mounted
[    1.320790] Freeing unused kernel memory: 384K
[    1.661499] systemd[1]: System time before build time, advancing clock.
[    1.673646] cgroup: cgroup2: unknown option "nsdelegate"
[    1.705419] systemd[1]: systemd 243.2+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYP)
[    1.709364] systemd[1]: Detected architecture arm64.

Welcome to Poky (Yocto Project Reference Distro) 3.0.4 (zeus)!

[    1.736765] systemd[1]: Set hostname to <rockpi-s-rk3308>.
[    2.073956] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updati.
[    2.292034] systemd[1]: /lib/systemd/system/rpcbind.socket:5: ListenStream= references a path below legacy directory /var/run/, upd.
[    2.307908] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[    2.309078] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewa.
[    2.310332] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[    2.314007] systemd[1]: Created slice system-getty.slice.
[  OK  ] Created slice system-getty.slice.
[    2.326422] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[    2.328620] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    2.342436] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[    2.344520] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    2.350492] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[    2.351665] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password ��…ts to Console Directory Watch.
[    2.353764] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[    2.355039] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password R��…uests to Wall Directory Watch.
[    2.357324] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[    2.358338] systemd[1]: Reached target Paths.
[  OK  ] Reached target Paths.
[    2.366451] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[    2.367441] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    2.374509] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[    2.375518] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[    2.382516] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[    2.383523] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[    2.390692] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[    2.394256] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[    2.403039] systemd[1]: Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[    2.412554] systemd[1]: Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Audit Socket.
[    2.416033] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    2.423967] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    2.432648] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[    2.443977] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    2.447193] systemd[1]: Listening on udev Kernel Socket.
[  OK  ] Listening on udev Kernel Socket.
[    2.458183] systemd[1]: Mounting Huge Pages File System...
         Mounting Huge Pages File System...
[    2.469829] systemd[1]: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[    2.485647] systemd[1]: Mounting Kernel Debug File System...
         Mounting Kernel Debug File System...
[    2.501869] systemd[1]: Mounting Temporary Directory (/tmp)...
         Mounting Temporary Directory (/tmp)...
[    2.519898] systemd[1]: Starting Create list of static device nodes for the current kernel...
         Starting Create list of st��…odes for the current kernel...
[    2.533773] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
[  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
[    2.543217] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    2.552787] systemd[1]: Starting Journal Service...
         Starting Journal Service...
[    2.576600] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[    2.584777] systemd[1]: Mounting FUSE Control File System...
         Mounting FUSE Control File System...
[    2.593367] systemd[1]: Mounting Kernel Configuration File System...
         Mounting Kernel Configuration File System...
[    2.607724] systemd[1]: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems...
[    2.618757] systemd[1]: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[    2.647276] systemd[1]: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[    2.657226] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    2.699683] systemd[1]: Mounted Huge Pages File System.
[  OK  ] Mounted Huge Pages File System.
[    2.703111] systemd[1]: Mounted POSIX Message Queue File System.
[  OK  ] Mounted POSIX Message Queue File System.
[    2.715055] systemd[1]: Mounted Kernel Debug File System.
[  OK  ] Mounted Kernel Debug File System.
[    2.723257] systemd[1]: Mounted Temporary Directory (/tmp).
[  OK  ] Mounted Temporary Directory (/tmp).
[    2.732839] systemd[1]: Started Create list of static device nodes for the current kernel.
[  OK  ] Started Create list of sta��… nodes for the current kernel.
[    2.735882] systemd[1]: Mounted FUSE Control File System.
[  OK  ] Mounted FUSE Control File System.
[    2.750374] systemd[1]: Mounted Kernel Configuration File System.
[  OK  ] Mounted Kernel Configuration File System.
[    2.760643] systemd[1]: Started Remount Root and Kernel File Systems.
[  OK  ] Started Remount Root and Kernel File Systems.
[    2.764527] systemd[1]: Started Apply Kernel Variables.
[  OK  ] Started Apply Kernel Variables.
[    2.767050] systemd[1]: Condition check resulted in Create System Users being skipped.
[    2.779479] systemd[1]: Starting Create Static Device Nodes in /dev...
         Starting Create Static Device Nodes in /dev...
[    2.875573] systemd[1]: Started Create Static Device Nodes in /dev.
[  OK  ] Started Create Static Device Nodes in /dev.
[    2.883163] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /var/volatile...
         Starting Flush Journal to Persistent Storage...
         Starting udev Kernel Device Manager...
[  OK  ] Mounted /var/volatile.
         Starting Load/Save Random Seed...
[  OK  ] Reached target Local File Systems.
[    2.987935] systemd-journald[155]: Received client request to flush runtime journal.
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Reached target Sound Card.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target System Time Set.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Daily apt download activities.
[  OK  ] Reached target Timers.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Listening on RPCbind Server Activation Socket.
         Starting sshd.socket.
[  OK  ] Listening on Load/Save RF ��…itch Status /dev/rfkill Watch.
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Listening on sshd.socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[    4.015262] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin output high!
         Starting Bluetooth service...
[  OK  ] Started Kernel Logging Service.
[  OK  ] Started System Logging Service.
[  OK  ] Started D-Bus System Message Bus.
[    4.086169] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin input!
[    4.086840] [BT_RFKILL]: ENABLE UART_RTS
         Starting Install HCI UART Module...
         Starting Packet Filtering Framework...
         Starting rng-tools.service...
         Starting Login Service...
[    4.190127] [BT_RFKILL]: DISABLE UART_RTS
[    4.190613] [BT_RFKILL]: bt turn on power
[    4.246132] vendor storage:20160801 ret = -1
[    4.309554] Bluetooth: HCI UART driver ver 2.2.d448471.20190215-141136
[    4.310219] Bluetooth: HCI H4 protocol initialized
[    4.310672] Bluetooth: HCI Realtek H5 protocol initialized
[    4.311177] rtk_btcoex: rtk_btcoex_init: version: 1.2
[    4.311640] rtk_btcoex: create workqueue
[    4.312003] rtk_btcoex: Coex over UDP
[    4.332431] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Started Install HCI UART Module.
[  OK  ] Started Packet Filtering Framework.
[  OK  ] Started rng-tools.service.
[  OK  ] Started Bluetooth service.
[  OK  ] Reached target Network (Pre).
         Starting Network Manager...
         Starting LSB: network connection manager...
         Starting Load RTL8723DS Bluetooth firmware...
         Starting Network Service...
[    4.491650] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin output high!
         Starting Hostname Service...
[    4.562200] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin input!
[    4.562882] [BT_RFKILL]: ENABLE UART_RTS
[    4.666116] [BT_RFKILL]: DISABLE UART_RTS
[    4.666580] [BT_RFKILL]: bt turn on power
[  OK  ] Started Load RTL8723DS Bluetooth firmware.
[  OK  ] Started Login Service.
[  OK  ] Started Network Service.
         Starting Network Name Resolution...
[  OK  ] Started LSB: network connection manager.
[  OK  ] Started Network Manager.
[  OK  ] Started Hostname Service.
[    5.143420] random: nonblocking pool is initialized
[  OK  ] Started Load/Save Random Seed.
         Starting Network Manager Script Dispatcher Service...
[  OK  ] Started Network Manager Script Dispatcher Service.
[  OK  ] Started Network Name Resolution.
[  OK  ] Reached target Network.
[  OK  ] Reached target Host and Network Name Lookups.
         Starting Avahi mDNS/DNS-SD Stack...
         Starting DNS forwarder and DHCP server...
         Starting Permit User Sessions...
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started Getty on tty1.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started DNS forwarder and DHCP server.
[  OK  ] Reached target Multi-User System.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Poky (Yocto Project Reference Distro) 3.0.4 rockpi-s-rk3308 ttyS0

rockpi-s-rk3308 login: [    6.846337] rk_gmac-dwmac ff4e0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx