< 100.878> [system_reboot:5501] -v2- reboot system!!!
umount: can't umount ar: No such file or directory
BusyBox v1.15.1 (2019-03-19 18:06:55 CST) multi-call binary
Usage: mount [flags] DEVICE NODE [-o OPT,OPT]
Mount a filesystem. Filesystem autodetection requires /proc be mounted.
Options:
-a Mount all filesystems in fstab
-f Dry run
-r Read-only mount
-w Read-write mount (default)
-t FSTYPE Filesystem type
-O OPT Mount only filesystems with option OPT (-a only)
-o OPT:
loop Ignored (loop devices are autodetected)
[a]sync Writes are [a]synchronous
[no]atime Disable/enable updates to inode access times
[no]diratime Disable/enable atime updates to directories
[no]relatime Disable/enable atime updates relative to modification time
[no]dev (Dis)allow use of special device files
[no]exec (Dis)allow use of executable files
[no]suid (Dis)allow set-user-id-root programs
[r]shared Convert [recursively] to a shared subtree
[r]slave Convert [recursively] to a slave subtree
[r]private Convert [recursively] to a private subtree
[un]bindable Make mount point [un]able to be bind mounted
bind Bind a directory to an additional location
move Relocate an existing mount point
remount Remount a mounted filesystem, changing its flags
ro/rw Read-only/read-write mount
There are EVEN MORE flags that are specific to each filesystem
You'll have to see the written documentation for those filesystems
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
Restarting system.
test ddr
msdly:0-----fail
msdly:1-----fail
msdly:2-----fail
msdly:3-----fail
msdly:4-----fail
msdly:5-----fail
msdly:6-----fail
msdly:7-----fail
msdly:8-----fail
msdly:9-----fail
msdly:a-----fail
msdly:b-----fail
msdly:c-----fail
msdly:d-----fail
msdly:e-----fail
msdly:f-----fail
msdly:10-----fail
msdly:11-----fail
msdly:12-----fail
msdly:13-----ok
msdly:14-----ok
msdly:15-----ok
msdly:16-----ok
msdly:17-----ok
msdly:18-----ok
msdly:19-----ok
msdly:1a-----ok
msdly:1b-----ok
msdly:1c-----ok
msdly:1d-----ok
msdly:1e-----fail
final msdly:18
msldyreg:51814
Enter load_brec
Wafer revision is 1,reg_value is 0xf19b9999
over ecc error!
over ecc error!
over ecc error!
over ecc error!
Found brec at block4...
PAGESIZE=2048
PAGE_CNT=64
SECT_CNT=4
Start block :4,ECCCTL:0x1
------BREC OKAY--------
USE_UART = 1
***AL1213, AM0,brec.bin Ver Mar 19 2019 Tim:18:14:28,NAND***
chipinfo: 0xb4045910
MU_REG1:0x00002600
MU_REG2:0x00000000
MU_REG1:0x00003e00
MU_REG2:0x00003e00
MU_REG1:0x00003e00
MU_REG2:0x00003e00
CMU_COREPLL [b0010000]: 388d94b
CMU_BUSCLK [b001000c]: 29004388
SDR_CTL [b0070000]: 30166
SDR_CMD [b007000c]: 0
SDR_TIMING [b0070030]: 25aa7377
SDR_RFSH [b0070014]: d00
SDR_EN [b0070008]: 1
SDR_MODE [b0070018]: 521
SDR_CLKDLY [b007005c]: 10a0000
SDR_MSTDLY [b0070060]: 51813
SDR_LATENCY [b0070058]: 8000605
--------- getcorepll() COREPLL val:492
##Set nand Flash:32800 Khz##
##CMU_COREPLL:0x388d94b ,NAND_CTL: 0x48901
###CMU_NANDCLK:0x50e,CLKCTL:0x9,NANDCTL48901###
###NandDMAChannel:0 ###
###4.User_Data_2Byte:0
###5.EIP_IRQ_MODE:1
###6.TEST_RB_CTL:0
##7.SPECIAL_DMA_Test:0
##8.PageBCH24 Read:0,Write:0
##9.PageBCH8 Read:0,Write:0
##10.pseudoNoise:0
mode32:0x608401a4,mode8:0x608001a4
mode32:0x1a46084,mode8:0x1a46080
[INIT] INIT_CreateBlkTbls() enter.
====22 boot nand Flash CHIPID:0x9500f1ec ====
Flash ChipNo:0 CHIPID:9500f1ec
Flash ChipNo:1 CHIPID:0
===Set:0x0, NAND_ECCCTL:0x1,
AM1213 Set ECC type BCH8
NAND_ECCCTL:0x1 ==
--------- getcorepll() COREPLL val:492
CMU_COREPLL:0x388d94b
###10,9,492Mhz,15MHz,14909Khz ###
###Set BMA:61Mhz###
###CMU_NANDCLK:0x70a,CLKCTL:0x9,NANDCTL48900###
INIT_DBG: ================NAND STORAGE INFOR================
INIT_DBG: ChipEnableInfo is:0x1
INIT_DBG: ChipCnt is:0x1
INIT_DBG: BankCntPerChip is:0x1
INIT_DBG: DieCntPerChip is:0x1
INIT_DBG: PlaneCntPerDie is:0x1
INIT_DBG: SectorNumPerPage is:0x4
INIT_DBG: PageNumPerPhyBlk is:0x40
INIT_DBG: TotalBlkNumPerDie is:0x400
INIT_DBG: OperationOpt is:0x10
INIT_DBG: FrequencePar is:0xf
INIT_DBG: Reclaim is:6
INIT_DBG: SpareSize is:64
INIT_DBG: NandChipId is:0x9500f1ec
INIT_DBG: ====================================================
INIT_DBG: ================LOGIC ORGANIZE INFO=================
INIT_DBG: DataBlkNumPerZone is:0x3d8
INIT_DBG: PageNumPerLogicBlk is:0x40
INIT_DBG: SectorNumPerLogicPage is:0x4
INIT_DBG: ZoneNumPerDie is:0x1
INIT_DBG: ====================================================
INIT_DBG: ===============SPECICAL CMMOND INFO=================
INIT_DBG: MultiProgCmd is:0x11, 0x81
INIT_DBG: MultiCopyReadCmd is:0x0, 0x0, 0x35
INIT_DBG: MultiCopyProgCmd is:0x85, 0x11, 0x81
INIT_DBG: MultiBlkAddrOffset is:0x1
INIT_DBG: BadBlkFlagPst is:0x1
INIT_DBG: ReadMultiOpStatusCmd is:0x70
INIT_DBG: InterChip0StatusCmd is:0xf1
INIT_DBG: InterChip1StatusCmd is:0xf2
INIT_DBG: =====================================================
INIT_DBG: ===============Sector Bimmap=================
INIT_DBG 1.===>Sector_BitmapBBF:0x3
INIT_DBG 2.===>Sector_BitmapSpare:0x7
INIT_DBG 3.===>USER_DataByte:0x2
INIT_DBG 4.===>USER_SectorCnt:0x3
INIT_DBG 5.===>TOTAL_SPAREDATA:6
INIT_DBG 6.===>Single_BitmapSpare:7
INIT_DBG: =====================================================
TOTAL_BANKS 1
DIENUM_IN_FLASH 1
ZONENUM_PER_DIE 1
SUBLK_PER_DIE 1024
PAGES_PER_SUBLK 64
MULTI_PLANE_SUPPORT 0
DIE_FIRST_SUBLK_NUM 8
###NandDevInfo.PhyCache :8081bda0 ,size:2048
###GPageBuf:0x8081ad90
[SCAN] ScanSearchZoneTbls: (DieNo: 0) enter.
ZoneTblStartPage:4
ScanSearchZoneTbls: [SCAN] Found valid zone table 0 for die 0 at block 8, page 4.
[SCAN] ScanSearchZoneTbls: (DieNo: 0) out, ret 0
[INIT] INIT_CreateBlkTbls() out, ret 0.
##1.Reclaim: 6,6,brecsize:128KB
##2.Read Super:1, Readclaim:1
##3.Write Super:0, Wearleveling:1
##4.ECC_reclaim,1,overecc:1
##5.DataBlk:984,MultiPlane:0
##6.PageCache:0x8081ad90,4
##7.NandDevInfo.PhyCache:0x8081bda0:
FlashReadBuf:0x8081dab0,FlashReadFileBuf:0x8081dcb0
FlashBuf_S:0x8081deb0,D:0x8081feb0
+++1> SystemSize:4f80, 1:0,2:0,3:0,4:7000, 5:0,6:0,7:0 +++
DIRItemsCheckSum:0x11455597,0x11455597
#get file :2,name:RECOVER BIN,res:1#
USE_UART = 1
---- bootdisplay test ddr cap 128M
1280 720
de input pixel format:5
runto:301
runto:304
runto:309
global_data.pic_data_addr:a5800000
exit display boot pic
1+:RECOVER BIN, 10, 7800,5b45e708 +
1+:FMCOVER BIN, 4c, ea00,fc663868 +
1+:WELCOME BIN, c1, 1c2200,7f98d06f +
1+:COVER BIN, ed2, ea800, 23daaeb +
1+:FAILED BIN, 1626, ea800,5203d2d4 +
1+:SUCCESS BIN, 1d7a, ea800,68f22e7f +
1+:LCM BIN, 24ce, 200,96550729 +
1+:BACKLIGHBIN, 24cf, 200,457a1265 +
1+:GAMMA BIN, 24d0, 600,3117a936 +
1+:GPIO BIN, 24d3, 200,3358a264 +
1+:VERSION CON, 24d4, 200,d3016564 +
1+:SYSCFG SYS, 24d5, 346200,883b4570 +
1+:INITRD DAT, 3f06, 200000,4fc8749b +
1+:BOOTARG TXT, 4f06, 200,a2db26f3 +
system_code_check end 14784ms 0
system_code_check retrun 0
CheckSum:$3b73,e,e
###MBRC_Whole:14, code:13,55aa3b73!####
CheckSum:$3b73,e,e
CheckSum:$3b73,e,e
CheckSum:$3b73,e,e
mbrc_test_repair OK
CheckSum:$debf,100,100
CheckSum:$debf,100,100
CheckSum:$debf,100,100
CheckSum:$debf,100,100
brec_test_repair OK
SYSCFG SYS
0: Size:00346200 offset:000024d5
INITRD DAT
1: Size:00200000 offset:00003f06
BOOTARG TXT
2: Size:00000200 offset:00004f06
No any more files
### new read mode fix ###
Kernel command line: rd_start=0x80400000 rd_size=0x00200000 reserved_mem=61M root=/dev/ram0 rw init=/linuxrc AM7X_PARTS=rootfs,user1,vram,reserve AM7X_ROOTFS=ext2 console=ttyS1,115200n8
Load 3432960 bytes (6705 sects) from 0x000024d5
BREC#syscfg.sys is loaded at 80003000, checksum32=0x883b4570
Load 2097152 bytes (4096 sects) from 0x00003f06
BREC#initrd.dat is loaded at 80400000, checksum32=0x4fc8749b
./../../../brec/nand_driver_entry.c-89 Brec nand exit!!
KERNEL checksum: 0x883b4570
INITRD checksum: 0x4fc8749b
Kernel command line: rd_start=0x80400000 rd_size=0x00200000 reserved_mem=61M root=/dev/ram0 rw init=/linuxrc AM7X_PARTS=rootfs,user1,vram,reserve AM7X_ROOTFS=ext2 console=ttyS1,115200n8
Kernel command line length: 165
rd_start: 0x80400000
CHIP_INFO1: 0xb4045910
CHIP_INFO2: 0xb4045910
Starting linux kernel at 0x80003400
board init
@cmdline length: 165@chipinfo: 0xb4045910
AM: external initramfs
Linux version 2.6.27.29 (liuhp@srv-micro-sw) (gcc version 4.3.3 (Sourcery G++ Lite 4.3-154) ) #1 PREEMPT Tue Mar 19 18:06:46 CST 2019
AM7X LINUX started...
console [early0] enabled
CPU revision is: 5501964c (MIPS 24K)
Determined physical RAM map:
memory: 08000000 @ 00000000 (usable)
Initial ramdisk at: 0x80400000 (2097152 bytes)
Zone PFN ranges:
Normal 0x00000000 -> 0x00008000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00008000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: rd_start=0x80400000 rd_size=0x00200000 reserved_mem=61M root=/dev/ram0 rw init=/linuxrc AM7X_PARTS=rootfs,user1,vram,reserve AM7X_ROOTFS=ext2 console=ttyS1,115200n8
Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
Writing ErrCtl register=0003d9f4
Readback ErrCtl register=0003d9f4
PID hash table entries: 512 (order: 9, 2048 bytes)
<3>am: membase@0xb0190020, irq19
co1, baud=115200, parity=n, bits=8, flow=n
console handover: boot [early0] -> real [ttyS1]
printk okay!
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 61284k/131072k available (2663k kernel code, 69736k reserved, 539k data, 152k init, 0k highmem)
SLUB: Genslabs=6, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 321.53 BogoMIPS (lpj=643072)
Mount-cache hash table entries: 512
net_namespace: 588 bytes
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 2048k freed
squashfs: version 3.4 (2008/08/26) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 123
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ActionsMicro AM7XXX serial driver version 0.14
<3>am: membase@0xb0160000, irq20
ttyS0 at MMIO 0x10160000 (irq = 20) is a AM
<3>am: membase@0xb0190020, irq19
ttyS1 at MMIO 0x10190020 (irq = 19) is a AM
brd: module loaded
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
&&&& fun:init_mtd, 389&&&&
&&&& fun:register_mtd_user, 141&&&&
usbmon: debugfs is not available
rtc-am7xxx rtc-am7xxx.0: rtc core: registered rtc-am7xxx as rtc0
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
rtc-am7xxx rtc-am7xxx.0: hctosys: invalid date/time
blkdev_open
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 2048KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
VFS: Mounted root (ext2 filesystem).
kernel_init:prepare_namespace ok
prom_free_prom_memory okay
Freeing unused kernel memory: 152k freed
write 48403 to b0190020
COM1 start up!
No such file: /bin/init
init_post:ramdisk_execute_command:<NULL>
init_post:execute_command:/linuxrc
init_am7x_nftl: CHIPINFO: 0xb4045910
MU_REG1:0x00003e00
MU_REG2:0x00003e00
--------- getcorepll() COREPLL val:492
##Set nand Flash:32800 Khz##
##CMU_COREPLL:0x388d94b ,NAND_CTL: 0x48901
###CMU_NANDCLK:0x50e,CLKCTL:0x9,NANDCTL48901###
###NandDMAChannel:0 ###
###4.User_Data_2Byte:0
###5.EIP_IRQ_MODE:1
###6.TEST_RB_CTL:0
##7.SPECIAL_DMA_Test:0
##8.PageBCH24 Read:0,Write:0
##9.PageBCH8 Read:0,Write:0
##10.pseudoNoise:0
mode32:0x608401a4,mode8:0x608001a4
mode32:0x1a46084,mode8:0x1a46080
====22 boot nand Flash CHIPID:0x9500f1ec ====
Flash ChipNo:0 CHIPID:9500f1ec
Flash ChipNo:1 CHIPID:0
===Set:0x0, NAND_ECCCTL:0x1,
AM1213 Set ECC type BCH8
NAND_ECCCTL:0x1 ==
--------- getcorepll() COREPLL val:492
####run to :Set_TestBuf,83c6b000###
ScanSearchZoneTbls: [SCAN] Found valid zone table 0 for die 0 at block 8, page 4.
##1.Reclaim: 6,6,brecsize:128KB
##2.Read Super:1, Readclaim:1
##3.Write Super:1, Wearleveling:1
##4.ECC_reclaim,1,overecc:1
##5.DataBlk:984,MultiPlane:0
##6.PageCache:0xa3c0a000,4
##7.NandDevInfo.PhyCache:0xa3c09000:
===NO: 0,Read Zone : 0, Blk:8,Pge:4===
kernel capacity is:0x7000 sectors
Partinfo:AM7X_PARTS=rootfs,user1,vram,reserve
NO:0,rootfs offset:80,Cap:20000 64MB
NO:1,user1 offset:20080,Cap:4000 8MB
NO:2,vram offset:24080,Cap:800 1MB
NO:3,reserve offset:26800,Cap:10000 32MB
==nand_get_cap:36800,109MB==
NFTL: whole cap 0x36800
NFTL: using C:54 H:128 S:32 (== 0x36000 sects)
### CmpBuf:0x83eb0000###
==nand_get_cap:36800,109MB==
nand_block:<6>Enter My PARTITION PARSER
sector_size=1
start: 0x00000080, size:0x00020000
nand_block1<6>start: 0x00020080, size:0x00004000
nand_block2<6>start: 0x00024080, size:0x00000800
nand_block3<6>start: 0x00026800, size:0x00010000
nand_block4<6>start: 0x00000000, size:0x00000000
***install ntfl block init OK***
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
mount: mounting /dev/partitions/udisk on /mnt/udisk failed: No such file or directory
format udisk
mkfs.vfat: can't open '/dev/partitions/udisk': No such file or directory
mount: mounting /dev/partitions/udisk on /mnt/udisk failed: No such file or directory
fsck.fat -a vram
blkdev_open
>>>>>>vram_check_result=/dev/partitions/vram: 36 files, 503/2003 clusters
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Root filesystem on nand
Start AM7531 Console
>>>>>> check user1
in child process
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/partitions/user1 is mounted.
blkdev_open
This is config.app'
/dev/partitions/user1 was not cleanly unmounted, check forced.
kernel.panic = 10
kernel.panic_on_oops = 1
net.ipv4.route.max_size = 8192
net.ipv4.route.gc_elasticity = 4
module /lib/modules/2.6.27.29/am7x_graph inserted
/lib/modules/2.6.27.29/am7x_graph major = 30
node /dev/graph created
set node access to 666
set the tcp paragram
set ok!
module /lib/modules/2.6.27.29/hx170dec inserted
/lib/modules/2.6.27.29/hx170dec major = 249
node /tmp/dev/hx170 created
set node access to 666
swtich usb otg state device --->host
/dev/partitions/user1: 547/1160 files (21.6% non-contiguous), 7204/8192 blocks
mount: mounting /dev/partitions/cdrom on /mnt/cdrom failed: No such file or directory
mount: mounting /dev/partitions/bak on /mnt/bak failed: No such file or directory
Please press Enter to activate this console. insmod: can't insert '/lib/modules/2.6.27.29/am7x_keys.ko': No such file or directory
insmod: can't insert '/lib/modules/2.6.27.29/am7x_tp.ko': No such file or directory
insmod: can't insert '/lib/modules/2.6.27.29/am7x_battery.ko': No such file or directory
Tue Feb 25 22:04:21 UTC 2020
GlobalValue width=1280,height=720,default_color=0x0,format=5,display_mode=2
ds_conf.input.width = 1280 ds_conf.input.height = 720
physical_address=0x1000 logical_address=4
net.core.rmem_max = 1024000
normal termination
open key device failed
open touchpanel device failed
message collector id : 721896656
use default fui.app
[SHELL][194133863.700427] [main:61] read pipe: 4, write pipe: 5
application_ create err == 0, msgq_id=0
read pipe: 4, write pipe: 5
Board Power Key OFF is 0x7, ON is 60
IR Power Key OFF is 0x8, ON is 0x19
MINF[set_back_light-623]:backlight length is 21
MINF[_do_action-531]:Call do action to set env para cmd=0
the file is not exist,backlight can't be set
filepathname: /am7x/case/data/msyh.ttf
stream->size: 4552756
heap_base=0x3cf4000
heap_size=0x4000
init_2d:pRTask=0x3066f000
init_2d ok
cb_display.put_display_task==0x414f18
cb_display.get_current_display_addr==0x414f8c
open calibrate file failed
system resource init error
swfext_album_register
read /am7x/case/data/keymap/globalswfkey.bin error,please check whether it is exist
[0:0:5.948][EZ_ConfigInit:1654] uuid: a146e1b4-2fad-4e15-993c-79438ca4a662
[0:0:5.976][EZ_ConfigInit:1886] Get memory total(62 MB)!
[0:0:5.980][EZ_ConfigInit:1905] Get product family(ezcast:1)!
[0:0:5.986][EZ_ConfigInit:1949] Get product type(ezcast:0)!
rdate: bad address 'time.nist.gov'
[0:0:6.057][HAL_8250NetLooperInit:1224] Ok, thread(0x312ca4d0)!
Unsupported Tag [77] Metadata
The font[ID: 5] has layout information
EZCASTPRO_MODE==0[4]
MainSWF.language=9[4]
[0:0:6.371][EZ_ConfigLanguageSet:702] Set language(it)!
[Multilanguage.as] [setLanguageSWFName] _global.MainSWF.language_priv = -1[4]
setLanguage = it[4]
< 6.388> [load_language:134] ===================================================
< 6.395> [load_language:135] AppName: ezcast
< 6.399> [load_language:136] ===================================================
[set_language_swf_name]name = ezcast, ret = 1
warnning_str: Riscontrata anomalia WiFi, si consiglia di utilizzare un adattatore USB esterno per garantire l'alimentazione.[4]
warnning_str2: Riavvio automatico in [4]
warnning_str3: secondi[4]
****ezcastprojector is 0[4]
AirplayRes: 0
[0:0:6.618][EZ_ConfigAirplayMirrorOnlySet:1016] Set Airplay mirror-only(1)!
Unsupported External Call : sys_get_passcode_onoff
castCode: [4]
========= connectMode: 0[4]
[sysinfo_get_cpu_frequency][8120] -- Get cpu frequency
[sysinfo_get_cpu_frequency][8122] -- reg: 0x388d94b
[sysinfo_get_cpu_frequency][8124] -- cpu frequency: 492
>>>>[Main] -- TEST_ENABLE: true, LAN_ONLY: false, EZCAST_LITE_ENABLE: true, EZWILAN_ENABLE: false[4]
[sysinfo_check_ezmusic_flag][9488] -- ezmusic_flag: 0
audioDecOpen
os_linux.c 268
os_linux.c 413 tid:258, pt tid:268, pt ptid:258
HDMI has been set
mixer_init,play_dev=0x3 (Earphone=0x1,HDMI=0x2,I2S=0x4,SPDIF2=0x8,SPDIF51=0x10)
os_linux.c 268
os_linux.c 413 tid:258, pt tid:269, pt ptid:258
audioDecCmd:SET_NOTIFY_FUNC
< 6.769> [ezCastGetAutoplayVal:723] GET_AUTOPLAY_ENABLE: 1
use miracast.swf[4]
to load bg swf=main_customize.swf[4]
MINF[sysinfo_read_edid_bin-5168]:read_index==============0
de_info.screen_type= 1 5
MINF[sysinfo_read_edid_bin-5168]:read_index==============1
de_info.screen_type= 1 5
AUTO_STANDBY_ENABLE: false, AUTO_STANDBY_TIME: 3600[4]
now time: 1582668264[4]
load firstSWF@@@@@@@@@@[4]
Last UI is 1
last_ui = 1[4]
currentSWF[4]
strezcast.swf[4]
index=null[4]
currentSWF=ezcast.swf[4]
direction=====================0
++++++++++++++++++++++++sysinfo_setgpio_for_usbswitch 4742
sysinfo_get_disauto_status: 0
check factory test status:[4]
Unsupported Tag [77] Metadata
Unsupported Tag [77] Metadata
*********** Load background **********[4]
*********** Load background end**********[4]
to load ezcast_background.swf[4]
now into wifidisplay.swf[4]
MainSWF.start_concurren_clientap_mode========0[4]
MainSWF.start_concurrent_softap_mode========0[4]
******************** in wifi display ****************[4]
command from as is: EZCAST_SWITCH_TO
send length is : -1
Unsupported Tag [77] Metadata
The font[ID: 10] has layout information
The font[ID: 58] has layout information
Unsupported Tag [77] Metadata
The font[ID: 3] has layout information
Unsupported Tag [77] Metadata
connectMode: 0SystemInfo.ROUTER_ALLOW: 1[4]
< 7.503> [ezCastGetAutoplayVal:723] GET_AUTOPLAY_ENABLE: 1
begin set loadcallback[4]
setLanguage = it[4]
< 7.512> [load_language:134] ===================================================
< 7.519> [load_language:135] AppName: ezcast
< 7.524> [load_language:136] ===================================================
[set_language_swf_name]name = ezcast, ret = 1
+++++++++++++++++localeCallback+++++++++++++++++++++++[4]
Main_top_bar :: initialization[4]
::::::::::: iconMode: 1[4]
StorageSWF all hide[4]
ae_set_file735:curr_file===/usr/share/ezdata/start.mp3
audio_status=0
file in local filesystem
audioDecCmd:SET_FILE
tag=0x0
299 i=0
Guess mp3 success.
mixer_del
dac request_buf_size =176400
sb_init dac buf is 0x87f82000
mixer_new,ReSamplingType=0 (NoResample=0,Up=1,Down=2,Compress=3,Mono2Stereo=4)
ori_sample_rate=44100,play_sample_rate=44100
dsp ERROR at -1
music_dec_write.c 281
music_dec.c 1145
dsp_status=2 status=5
music_dec.c 1377
music_dec.c 1386
audio file information ready
audioDecCmd GET_MEDIA_INFO
[ae_set_file]824, audio_setfile_ok=1, err_set=0
[ae_play]665, audio_status=0
audioDecCmd:PLAY mode:0
loadswf_callback, currentSWF: ezcast.swf[4]
DACIO_SET_STOP
dsp ERROR at -1
music_dec_write.c 281
ae_stop,980
ae_stop send Stop cmd!
audioDecCmd:STOP
Audio stop!audio_status=8
ae_stop,1008
ae_close,580
FUI/audio_engie.c file AUDIO_STOP_OK_MSG
audioDecCmd:TERMINAL
audioDecClose
music_dec.c 1976
music_dec.c 1978
mixer_del
_audio_clear_setfile_para22Close FileHandle=0x5b27e8
ae_close,614
>>>>>>>>>>>>> systemVolume: 13[4]
(none) login: ^^?aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Please press Enter to activate this console.
(none) login: root
Password:
Login incorrect
(none) login: root
Password:
Login incorrect
(none) login: root
Password:
Login incorrect
login[270]: invalid password for 'root' on 'console'
Please press Enter to activate this console. admin
(none) login: admin
Password:
Login incorrect
(none) login: adminwarnning: Riscontrata anomalia WiFi, si consiglia di utilizzare un adattatore USB esterno per garantire l'alimentazione.[4]
Password:
Login incorrect
(none) login: amin dmin
Password:
Login incorrect
login[271]: invalid password for 'UNKNOWN' on 'console'
Please press Enter to activate this console. < 100.869> [system_reboot:5501] -v2- reboot system!!!
umount: can't umount ar: No such file or directory
BusyBox v1.15.1 (2019-03-19 18:06:55 CST) multi-call binary
Usage: mount [flags] DEVICE NODE [-o OPT,OPT]
Mount a filesystem. Filesystem autodetection requires /proc be mounted.
Options:
-a Mount all filesystems in fstab
-f Dry run
-r Read-only mount
-w Read-write mount (default)
-t FSTYPE Filesystem type
-O OPT Mount only filesystems with option OPT (-a only)
-o OPT:
loop Ignored (loop devices are autodetected)
[a]sync Writes are [a]synchronous
[no]atime Disable/enable updates to inode access times
[no]diratime Disable/enable atime updates to directories
[no]relatime Disable/enable atime updates relative to modification time
[no]dev (Dis)allow use of special device files
[no]exec (Dis)allow use of executable files
[no]suid (Dis)allow set-user-id-root programs
[r]shared Convert [recursively] to a shared subtree
[r]slave Convert [recursively] to a slave subtree
[r]private Convert [recursively] to a private subtree
[un]bindable Make mount point [un]able to be bind mounted
bind Bind a directory to an additional location
move Relocate an existing mount point
remount Remount a mounted filesystem, changing its flags
ro/rw Read-only/read-write mount
There are EVEN MORE flags that are specific to each filesystem
You'll have to see the written documentation for those filesystems
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
Restarting system.
test ddr
msdly:0-----fail
msdly:1-----fail
msdly:2-----fail
msdly:3-----fail
msdly:4-----fail
msdly:5-----fail
msdly:6-----fail
msdly:7-----fail
msdly:8-----fail
msdly:9-----fail
msdly:a-----fail
msdly:b-----fail
msdly:c-----fail
msdly:d-----fail
msdly:e-----fail
msdly:f-----fail
msdly:10-----fail
msdly:11-----fail
msdly:12-----fail
msdly:13-----ok
msdly:14-----ok
msdly:15-----ok
msdly:16-----ok
msdly:17-----ok
msdly:18-----ok
msdly:19-----ok
msdly:1a-----ok
msdly:1b-----ok
msdly:1c-----ok
msdly:1d-----ok
msdly:1e-----fail
final msdly:18
msldyreg:51814
Enter load_brec
Wafer revision is 1,reg_value is 0xf19b9999
over ecc error!
over ecc error!
over ecc error!
over ecc error!
Found brec at block4...
PAGESIZE=2048
PAGE_CNT=64
SECT_CNT=4
Start block :4,ECCCTL:0x1
------BREC OKAY--------
USE_UART = 1
***AL1213, AM0,brec.bin Ver Mar 19 2019 Tim:18:14:28,NAND***
chipinfo: 0xb4045910
MU_REG1:0x00002600
MU_REG2:0x00000000
MU_REG1:0x00003e00
MU_REG2:0x00003e00
MU_REG1:0x00003e00
MU_REG2:0x00003e00
CMU_COREPLL [b0010000]: 388d94b
CMU_BUSCLK [b001000c]: 29004388
SDR_CTL [b0070000]: 30166
SDR_CMD [b007000c]: 0
SDR_TIMING [b0070030]: 25aa7377
SDR_RFSH [b0070014]: d00
SDR_EN [b0070008]: 1
SDR_MODE [b0070018]: 521
SDR_CLKDLY [b007005c]: 10a0000
SDR_MSTDLY [b0070060]: 51814
SDR_LATENCY [b0070058]: 8000605
--------- getcorepll() COREPLL val:492
##Set nand Flash:32800 Khz##
##CMU_COREPLL:0x388d94b ,NAND_CTL: 0x48901
###CMU_NANDCLK:0x50e,CLKCTL:0x9,NANDCTL48901###
###NandDMAChannel:0 ###
###4.User_Data_2Byte:0
###5.EIP_IRQ_MODE:1
###6.TEST_RB_CTL:0
##7.SPECIAL_DMA_Test:0
##8.PageBCH24 Read:0,Write:0
##9.PageBCH8 Read:0,Write:0
##10.pseudoNoise:0
mode32:0x608401a4,mode8:0x608001a4
mode32:0x1a46084,mode8:0x1a46080
[INIT] INIT_CreateBlkTbls() enter.
====22 boot nand Flash CHIPID:0x9500f1ec ====
Flash ChipNo:0 CHIPID:9500f1ec
Flash ChipNo:1 CHIPID:0
===Set:0x0, NAND_ECCCTL:0x1,
AM1213 Set ECC type BCH8
NAND_ECCCTL:0x1 ==
--------- getcorepll() COREPLL val:492
CMU_COREPLL:0x388d94b
###10,9,492Mhz,15MHz,14909Khz ###
###Set BMA:61Mhz###
###CMU_NANDCLK:0x70a,CLKCTL:0x9,NANDCTL48900###
INIT_DBG: ================NAND STORAGE INFOR================
INIT_DBG: ChipEnableInfo is:0x1
INIT_DBG: ChipCnt is:0x1
INIT_DBG: BankCntPerChip is:0x1
INIT_DBG: DieCntPerChip is:0x1
INIT_DBG: PlaneCntPerDie is:0x1
INIT_DBG: SectorNumPerPage is:0x4
INIT_DBG: PageNumPerPhyBlk is:0x40
INIT_DBG: TotalBlkNumPerDie is:0x400
INIT_DBG: OperationOpt is:0x10
INIT_DBG: FrequencePar is:0xf
INIT_DBG: Reclaim is:6
INIT_DBG: SpareSize is:64
INIT_DBG: NandChipId is:0x9500f1ec
INIT_DBG: ====================================================
INIT_DBG: ================LOGIC ORGANIZE INFO=================
INIT_DBG: DataBlkNumPerZone is:0x3d8
INIT_DBG: PageNumPerLogicBlk is:0x40
INIT_DBG: SectorNumPerLogicPage is:0x4
INIT_DBG: ZoneNumPerDie is:0x1
INIT_DBG: ====================================================
INIT_DBG: ===============SPECICAL CMMOND INFO=================
INIT_DBG: MultiProgCmd is:0x11, 0x81
INIT_DBG: MultiCopyReadCmd is:0x0, 0x0, 0x35
INIT_DBG: MultiCopyProgCmd is:0x85, 0x11, 0x81
INIT_DBG: MultiBlkAddrOffset is:0x1
INIT_DBG: BadBlkFlagPst is:0x1
INIT_DBG: ReadMultiOpStatusCmd is:0x70
INIT_DBG: InterChip0StatusCmd is:0xf1
INIT_DBG: InterChip1StatusCmd is:0xf2
INIT_DBG: =====================================================
INIT_DBG: ===============Sector Bimmap=================
INIT_DBG 1.===>Sector_BitmapBBF:0x3
INIT_DBG 2.===>Sector_BitmapSpare:0x7
INIT_DBG 3.===>USER_DataByte:0x2
INIT_DBG 4.===>USER_SectorCnt:0x3
INIT_DBG 5.===>TOTAL_SPAREDATA:6
INIT_DBG 6.===>Single_BitmapSpare:7
INIT_DBG: =====================================================
TOTAL_BANKS 1
DIENUM_IN_FLASH 1
ZONENUM_PER_DIE 1
SUBLK_PER_DIE 1024
PAGES_PER_SUBLK 64
MULTI_PLANE_SUPPORT 0
DIE_FIRST_SUBLK_NUM 8
###NandDevInfo.PhyCache :8081bda0 ,size:2048
###GPageBuf:0x8081ad90
[SCAN] ScanSearchZoneTbls: (DieNo: 0) enter.
ZoneTblStartPage:12
ScanSearchZoneTbls: [SCAN] Found valid zone table 0 for die 0 at block 8, page 12.
[SCAN] ScanSearchZoneTbls: (DieNo: 0) out, ret 0
[INIT] INIT_CreateBlkTbls() out, ret 0.
##1.Reclaim: 6,6,brecsize:128KB
##2.Read Super:1, Readclaim:1
##3.Write Super:0, Wearleveling:1
##4.ECC_reclaim,1,overecc:1
##5.DataBlk:984,MultiPlane:0
##6.PageCache:0x8081ad90,4
##7.NandDevInfo.PhyCache:0x8081bda0:
FlashReadBuf:0x8081dab0,FlashReadFileBuf:0x8081dcb0
FlashBuf_S:0x8081deb0,D:0x8081feb0
+++1> SystemSize:4f80, 1:0,2:0,3:0,4:7000, 5:0,6:0,7:0 +++
DIRItemsCheckSum:0x11455597,0x11455597
#get file :2,name:RECOVER BIN,res:1#
USE_UART = 1
---- bootdisplay test ddr cap 128M
1280 720
de input pixel format:5
runto:301
runto:304
runto:309
global_data.pic_data_addr:a5800000
exit display boot pic
1+:RECOVER BIN, 10, 7800,5b45e708 +
1+:FMCOVER BIN, 4c, ea00,fc663868 +
1+:WELCOME BIN, c1, 1c2200,7f98d06f +
1+:COVER BIN, ed2, ea800, 23daaeb +
1+:FAILED BIN, 1626, ea800,5203d2d4 +
1+:SUCCESS BIN, 1d7a, ea800,68f22e7f +
1+:LCM BIN, 24ce, 200,96550729 +
1+:BACKLIGHBIN, 24cf, 200,457a1265 +
1+:GAMMA BIN, 24d0, 600,3117a936 +
1+:GPIO BIN, 24d3, 200,3358a264 +
1+:VERSION CON, 24d4, 200,d3016564 +
1+:SYSCFG SYS, 24d5, 346200,883b4570 +
1+:INITRD DAT, 3f06, 200000,4fc8749b +
1+:BOOTARG TXT, 4f06, 200,a2db26f3 +
system_code_check end 14784ms 0
system_code_check retrun 0
CheckSum:$3b73,e,e
###MBRC_Whole:14, code:13,55aa3b73!####
CheckSum:$3b73,e,e
CheckSum:$3b73,e,e
CheckSum:$3b73,e,e
mbrc_test_repair OK
CheckSum:$debf,100,100
CheckSum:$debf,100,100
CheckSum:$debf,100,100
CheckSum:$debf,100,100
brec_test_repair OK
SYSCFG SYS
0: Size:00346200 offset:000024d5
INITRD DAT
1: Size:00200000 offset:00003f06
BOOTARG TXT
2: Size:00000200 offset:00004f06
No any more files
### new read mode fix ###
Kernel command line: rd_start=0x80400000 rd_size=0x00200000 reserved_mem=61M root=/dev/ram0 rw init=/linuxrc AM7X_PARTS=rootfs,user1,vram,reserve AM7X_ROOTFS=ext2 console=ttyS1,115200n8
Load 3432960 bytes (6705 sects) from 0x000024d5
BREC#syscfg.sys is loaded at 80003000, checksum32=0x883b4570
Load 2097152 bytes (4096 sects) from 0x00003f06
BREC#initrd.dat is loaded at 80400000, checksum32=0x4fc8749b
./../../../brec/nand_driver_entry.c-89 Brec nand exit!!
KERNEL checksum: 0x883b4570
INITRD checksum: 0x4fc8749b
Kernel command line: rd_start=0x80400000 rd_size=0x00200000 reserved_mem=61M root=/dev/ram0 rw init=/linuxrc AM7X_PARTS=rootfs,user1,vram,reserve AM7X_ROOTFS=ext2 console=ttyS1,115200n8
Kernel command line length: 165
rd_start: 0x80400000
CHIP_INFO1: 0xb4045910
CHIP_INFO2: 0xb4045910
Starting linux kernel at 0x80003400
board init
@cmdline length: 165@chipinfo: 0xb4045910
AM: external initramfs
Linux version 2.6.27.29 (liuhp@srv-micro-sw) (gcc version 4.3.3 (Sourcery G++ Lite 4.3-154) ) #1 PREEMPT Tue Mar 19 18:06:46 CST 2019
AM7X LINUX started...
console [early0] enabled
CPU revision is: 5501964c (MIPS 24K)
Determined physical RAM map:
memory: 08000000 @ 00000000 (usable)
Initial ramdisk at: 0x80400000 (2097152 bytes)
Zone PFN ranges:
Normal 0x00000000 -> 0x00008000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00008000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: rd_start=0x80400000 rd_size=0x00200000 reserved_mem=61M root=/dev/ram0 rw init=/linuxrc AM7X_PARTS=rootfs,user1,vram,reserve AM7X_ROOTFS=ext2 console=ttyS1,115200n8
Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
Writing ErrCtl register=0003d9f0
Readback ErrCtl register=0003d9f0
PID hash table entries: 512 (order: 9, 2048 bytes)
<3>am: membase@0xb0190020, irq19
co1, baud=115200, parity=n, bits=8, flow=n
console handover: boot [early0] -> real [ttyS1]
printk okay!
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 61284k/131072k available (2663k kernel code, 69736k reserved, 539k data, 152k init, 0k highmem)
SLUB: Genslabs=6, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 321.53 BogoMIPS (lpj=643072)
Mount-cache hash table entries: 512
net_namespace: 588 bytes
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 2048k freed
squashfs: version 3.4 (2008/08/26) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 123
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ActionsMicro AM7XXX serial driver version 0.14
<3>am: membase@0xb0160000, irq20
ttyS0 at MMIO 0x10160000 (irq = 20) is a AM
<3>am: membase@0xb0190020, irq19
ttyS1 at MMIO 0x10190020 (irq = 19) is a AM
brd: module loaded
loop: module loaded
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
&&&& fun:init_mtd, 389&&&&
&&&& fun:register_mtd_user, 141&&&&
usbmon: debugfs is not available
rtc-am7xxx rtc-am7xxx.0: rtc core: registered rtc-am7xxx as rtc0
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
ieee80211: 802.11 data/management/control stack, git-1.1.13
rtc-am7xxx rtc-am7xxx.0: hctosys: invalid date/time
blkdev_open
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 2048KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
VFS: Mounted root (ext2 filesystem).
kernel_init:prepare_namespace ok
prom_free_prom_memory okay
Freeing unused kernel memory: 152k freed
write 48403 to b0190020
COM1 start up!
No such file: /bin/init
init_post:ramdisk_execute_command:<NULL>
init_post:execute_command:/linuxrc
init_am7x_nftl: CHIPINFO: 0xb4045910
MU_REG1:0x00003e00
MU_REG2:0x00003e00
--------- getcorepll() COREPLL val:492
##Set nand Flash:32800 Khz##
##CMU_COREPLL:0x388d94b ,NAND_CTL: 0x48901
###CMU_NANDCLK:0x50e,CLKCTL:0x9,NANDCTL48901###
###NandDMAChannel:0 ###
###4.User_Data_2Byte:0
###5.EIP_IRQ_MODE:1
###6.TEST_RB_CTL:0
##7.SPECIAL_DMA_Test:0
##8.PageBCH24 Read:0,Write:0
##9.PageBCH8 Read:0,Write:0
##10.pseudoNoise:0
mode32:0x608401a4,mode8:0x608001a4
mode32:0x1a46084,mode8:0x1a46080
====22 boot nand Flash CHIPID:0x9500f1ec ====
Flash ChipNo:0 CHIPID:9500f1ec
Flash ChipNo:1 CHIPID:0
===Set:0x0, NAND_ECCCTL:0x1,
AM1213 Set ECC type BCH8
NAND_ECCCTL:0x1 ==
--------- getcorepll() COREPLL val:492
####run to :Set_TestBuf,83c6b000###
ScanSearchZoneTbls: [SCAN] Found valid zone table 0 for die 0 at block 8, page 12.
##1.Reclaim: 6,6,brecsize:128KB
##2.Read Super:1, Readclaim:1
##3.Write Super:1, Wearleveling:1
##4.ECC_reclaim,1,overecc:1
##5.DataBlk:984,MultiPlane:0
##6.PageCache:0xa3c0a000,4
##7.NandDevInfo.PhyCache:0xa3c09000:
===NO: 0,Read Zone : 0, Blk:8,Pge:12===
kernel capacity is:0x7000 sectors
Partinfo:AM7X_PARTS=rootfs,user1,vram,reserve
NO:0,rootfs offset:80,Cap:20000 64MB
NO:1,user1 offset:20080,Cap:4000 8MB
NO:2,vram offset:24080,Cap:800 1MB
NO:3,reserve offset:26800,Cap:10000 32MB
==nand_get_cap:36800,109MB==
NFTL: whole cap 0x36800
NFTL: using C:54 H:128 S:32 (== 0x36000 sects)
### CmpBuf:0x83eb0000###
==nand_get_cap:36800,109MB==
nand_block:<6>Enter My PARTITION PARSER
sector_size=1
start: 0x00000080, size:0x00020000
nand_block1<6>start: 0x00020080, size:0x00004000
nand_block2<6>start: 0x00024080, size:0x00000800
nand_block3<6>start: 0x00026800, size:0x00010000
nand_block4<6>start: 0x00000000, size:0x00000000
***install ntfl block init OK***
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
mount: mounting /dev/partitions/udisk on /mnt/udisk failed: No such file or directory
format udisk
mkfs.vfat: can't open '/dev/partitions/udisk': No such file or directory
mount: mounting /dev/partitions/udisk on /mnt/udisk failed: No such file or directory
fsck.fat -a vram
blkdev_open
>>>>>>vram_check_result=/dev/partitions/vram: 36 files, 503/2003 clusters
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Root filesystem on nand
Start AM7531 Console
>>>>>> check user1
in child process
This is config.app'
ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/partitions/user1 is mounted.
kernel.panic = 10
/dev/partitions/user1 was not cleanly unmountedkernel.panic_on_oops = 1
, check forced.
net.ipv4.route.max_size = 8192
net.ipv4.route.gc_elasticity = 4
module /lib/modules/2.6.27.29/am7x_graph inserted
/lib/modules/2.6.27.29/am7x_graph major = 30
node /dev/graph created
set node access to 666
set the tcp paragram
set ok!
module /lib/modules/2.6.27.29/hx170dec inserted
/lib/modules/2.6.27.29/hx170dec major = 249
node /tmp/dev/hx170 created
set node access to 666
swtich usb otg state device --->host
/dev/partitions/user1: 547/1160 files (21.6% non-contiguous), 7204/8192 blocks
mount: mounting /dev/partitions/cdrom on /mnt/cdrom failed: No such file or directory
mount: mounting /dev/partitions/bak on /mnt/bak failed: No such file or directory
Please press Enter to activate this console. insmod: can't insert '/lib/modules/2.6.27.29/am7x_keys.ko': No such file or directory
insmod: can't insert '/lib/modules/2.6.27.29/am7x_tp.ko': No such file or directory
insmod: can't insert '/lib/modules/2.6.27.29/am7x_battery.ko': No such file or directory
Tue Feb 25 22:04:21 UTC 2020
GlobalValue width=1280,height=720,default_color=0x0,format=5,display_mode=2
ds_conf.input.width = 1280 ds_conf.input.height = 720
physical_address=0x1000 logical_address=4
net.core.rmem_max = 1024000
normal termination
open key device failed
open touchpanel device failed
message collector id : 721896656
use default fui.app
[SHELL][194133863.703047] [main:61] read pipe: 4, write pipe: 5
application_ create err == 0, msgq_id=0
read pipe: 4, write pipe: 5
Board Power Key OFF is 0x7, ON is 60
IR Power Key OFF is 0x8, ON is 0x19
MINF[set_back_light-623]:backlight length is 21
MINF[_do_action-531]:Call do action to set env para cmd=0
the file is not exist,backlight can't be set
filepathname: /am7x/case/data/msyh.ttf
stream->size: 4552756
heap_base=0x3cf0000
heap_size=0x4000
init_2d:pRTask=0x3066f000
init_2d ok
cb_display.put_display_task==0x414f18
cb_display.get_current_display_addr==0x414f8c
open calibrate file failed
system resource init error
swfext_album_register
read /am7x/case/data/keymap/globalswfkey.bin error,please check whether it is exist
[0:0:5.949][EZ_ConfigInit:1654] uuid: a146e1b4-2fad-4e15-993c-79438ca4a662
[0:0:5.977][EZ_ConfigInit:1886] Get memory total(62 MB)!
[0:0:5.980][EZ_ConfigInit:1905] Get product family(ezcast:1)!
[0:0:5.986][EZ_ConfigInit:1949] Get product type(ezcast:0)!
rdate: bad address 'time.nist.gov'
[0:0:6.057][HAL_8250NetLooperInit:1224] Ok, thread(0x312ca4d0)!
Unsupported Tag [77] Metadata
The font[ID: 5] has layout information
EZCASTPRO_MODE==0[4]
MainSWF.language=9[4]
[0:0:6.371][EZ_ConfigLanguageSet:702] Set language(it)!
[Multilanguage.as] [setLanguageSWFName] _global.MainSWF.language_priv = -1[4]
setLanguage = it[4]
< 6.389> [load_language:134] ===================================================
< 6.395> [load_language:135] AppName: ezcast
< 6.400> [load_language:136] ===================================================
[set_language_swf_name]name = ezcast, ret = 1
warnning_str: Riscontrata anomalia WiFi, si consiglia di utilizzare un adattatore USB esterno per garantire l'alimentazione.[4]
warnning_str2: Riavvio automatico in [4]
warnning_str3: secondi[4]
****ezcastprojector is 0[4]
AirplayRes: 0
[0:0:6.619][EZ_ConfigAirplayMirrorOnlySet:1016] Set Airplay mirror-only(1)!
Unsupported External Call : sys_get_passcode_onoff
castCode: [4]
========= connectMode: 0[4]
[sysinfo_get_cpu_frequency][8120] -- Get cpu frequency
[sysinfo_get_cpu_frequency][8122] -- reg: 0x388d94b
[sysinfo_get_cpu_frequency][8124] -- cpu frequency: 492
>>>>[Main] -- TEST_ENABLE: true, LAN_ONLY: false, EZCAST_LITE_ENABLE: true, EZWILAN_ENABLE: false[4]
[sysinfo_check_ezmusic_flag][9488] -- ezmusic_flag: 0
audioDecOpen
os_linux.c 268
os_linux.c 413 tid:258, pt tid:268, pt ptid:258
HDMI has been set
mixer_init,play_dev=0x3 (Earphone=0x1,HDMI=0x2,I2S=0x4,SPDIF2=0x8,SPDIF51=0x10)
os_linux.c 268
os_linux.c 413 tid:258, pt tid:269, pt ptid:258
audioDecCmd:SET_NOTIFY_FUNC
< 6.733> [ezCastGetAutoplayVal:723] GET_AUTOPLAY_ENABLE: 1
use miracast.swf[4]
to load bg swf=main_customize.swf[4]
MINF[sysinfo_read_edid_bin-5168]:read_index==============0
de_info.screen_type= 1 5
MINF[sysinfo_read_edid_bin-5168]:read_index==============1
de_info.screen_type= 1 5
AUTO_STANDBY_ENABLE: false, AUTO_STANDBY_TIME: 3600[4]
now time: 1582668264[4]
load firstSWF@@@@@@@@@@[4]
Last UI is 1
last_ui = 1[4]
currentSWF[4]
strezcast.swf[4]
index=null[4]
currentSWF=ezcast.swf[4]
direction=====================0
++++++++++++++++++++++++sysinfo_setgpio_for_usbswitch 4742
sysinfo_get_disauto_status: 0
check factory test status:[4]
Unsupported Tag [77] Metadata
Unsupported Tag [77] Metadata
*********** Load background **********[4]
*********** Load background end**********[4]
to load ezcast_background.swf[4]
now into wifidisplay.swf[4]
MainSWF.start_concurren_clientap_mode========0[4]
MainSWF.start_concurrent_softap_mode========0[4]
******************** in wifi display ****************[4]
command from as is: EZCAST_SWITCH_TO
send length is : -1
Unsupported Tag [77] Metadata
The font[ID: 10] has layout information
The font[ID: 58] has layout information
Unsupported Tag [77] Metadata
The font[ID: 3] has layout information
Unsupported Tag [77] Metadata
connectMode: 0SystemInfo.ROUTER_ALLOW: 1[4]
< 7.474> [ezCastGetAutoplayVal:723] GET_AUTOPLAY_ENABLE: 1
begin set loadcallback[4]
setLanguage = it[4]
< 7.483> [load_language:134] ===================================================
< 7.491> [load_language:135] AppName: ezcast
< 7.495> [load_language:136] ===================================================
[set_language_swf_name]name = ezcast, ret = 1
+++++++++++++++++localeCallback+++++++++++++++++++++++[4]
Main_top_bar :: initialization[4]
::::::::::: iconMode: 1[4]
StorageSWF all hide[4]
ae_set_file735:curr_file===/usr/share/ezdata/start.mp3
audio_status=0
file in local filesystem
audioDecCmd:SET_FILE
tag=0x0
299 i=0
Guess mp3 success.
mixer_del
dac request_buf_size =176400
sb_init dac buf is 0x87f82000
mixer_new,ReSamplingType=0 (NoResample=0,Up=1,Down=2,Compress=3,Mono2Stereo=4)
ori_sample_rate=44100,play_sample_rate=44100
dsp ERROR at -1
music_dec_write.c 281
music_dec.c 1145
dsp_status=2 status=5
music_dec.c 1377
music_dec.c 1386
audio file information ready
audioDecCmd GET_MEDIA_INFO
[ae_set_file]824, audio_setfile_ok=1, err_set=0
[ae_play]665, audio_status=0
audioDecCmd:PLAY mode:0
loadswf_callback, currentSWF: ezcast.swf[4]
(none) login: DACIO_SET_STOP
dsp ERROR at -1
music_dec_write.c 281
ae_stop,980
ae_stop send Stop cmd!
audioDecCmd:STOP
Audio stop!audio_status=8
ae_stop,1008
ae_close,580
FUI/audio_engie.c file AUDIO_STOP_OK_MSG
audioDecCmd:TERMINAL
audioDecClose
music_dec.c 1976
music_dec.c 1978
mixer_del
_audio_clear_setfile_para22Close FileHandle=0x5b27e8
ae_close,614
>>>>>>>>>>>>> systemVolume: 13[4]
administrator
Password:
Login incorrect
(none) login: administrator
Password:
Login incorrect
(none) login: administrator
Password:
Login incorrect
login[224]: invalid password for 'UNKNOWN' on 'console'
Please press Enter to activate this console. warnning: Riscontrata anomalia WiFi, si consiglia di utilizzare un adattatore USB esterno per garantire l'alimentazione.[4]