Facebook
From Kashir, 2 Months ago, written in Plain Text.
Embed
Download Paste or View Raw
Hits: 74
  1. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.53.1.el7.x86_64] (local build)
  2. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Hitachi/HGST Ultrastar 7K4000
  6. Device Model:     Hitachi HUS724040ALE641
  7. Serial Number:    PBGMPG7T
  8. LU WWN Device Id: 5 000cca 23dc8f39b
  9. Firmware Version: MJAOA5F0
  10. User Capacity:    4,000,787,030,016 bytes [4,00 TB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Rotation Rate:    7200 rpm
  13. Form Factor:      3.5 inches
  14. Device is:        In smartctl database [for details use: -P show]
  15. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  16. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  17. Local Time is:    Sun May 22 23:08:47 2022 CEST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status:  (0x84) Offline data collection activity
  26.                                         was suspended by an interrupting command from host.
  27.                                         Auto Offline Data Collection: Enabled.
  28. Self-test execution status:      (   0) The previous self-test routine completed
  29.                                         without error or no self-test has ever
  30.                                         been run.
  31. Total time to complete Offline
  32. data collection:                (   24) seconds.
  33. Offline data collection
  34. capabilities:                    (0x5b) SMART execute Offline immediate.
  35.                                         Auto Offline data collection on/off support.
  36.                                         Suspend Offline collection upon new
  37.                                         command.
  38.                                         Offline surface scan supported.
  39.                                         Self-test supported.
  40.                                         No Conveyance Self-test supported.
  41.                                         Selective Self-test supported.
  42. SMART capabilities:            (0x0003) Saves SMART data before entering
  43.                                         power-saving mode.
  44.                                         Supports SMART auto save timer.
  45. Error logging capability:        (0x01) Error logging supported.
  46.                                         General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time:        (   1) minutes.
  49. Extended self-test routine
  50. recommended polling time:        (   1) minutes.
  51. SCT capabilities:              (0x003d) SCT Status supported.
  52.                                         SCT Error Recovery Control supported.
  53.                                         SCT Feature Control supported.
  54.                                         SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  59.   1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  60.   2 Throughput_Performance  0x0005   134   134   054    Pre-fail  Offline      -       89
  61.   3 Spin_Up_Time            0x0007   128   128   024    Pre-fail  Always       -       571 (Average 639)
  62.   4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       81
  63.   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  64.   7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  65.   8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -       34
  66.   9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       5918
  67.  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
  68.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       81
  69. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       171
  70. 193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       171
  71. 194 Temperature_Celsius     0x0002   133   133   000    Old_age   Always       -       45 (Min/Max 23/51)
  72. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  73. 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
  74. 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
  75. 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
  76.  
  77. SMART Error Log Version: 1
  78. No Errors Logged
  79.  
  80. SMART Self-test log structure revision number 1
  81. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  82. # 1  Extended offline    Completed without error       00%         9         -
  83.  
  84. SMART Selective self-test log data structure revision number 1
  85.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  86.     1        0        0  Not_testing
  87.     2        0        0  Not_testing
  88.     3        0        0  Not_testing
  89.     4        0        0  Not_testing
  90.     5        0        0  Not_testing
  91. Selective self-test flags (0x0):
  92.   After scanning selected spans, do NOT read-scan remainder of disk.
  93. If Selective self-test is pending on power-up, resume after 0 minute delay.
  94.  
  95. ================================================================================================================================
  96.  
  97. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.53.1.el7.x86_64] (local build)
  98. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  99.  
  100. === START OF INFORMATION SECTION ===
  101. Model Family:     Hitachi/HGST Ultrastar 7K4000
  102. Device Model:     Hitachi HUS724040ALE641
  103. Serial Number:    PCJU8XSS
  104. LU WWN Device Id: 5 000cca 24ce7adcc
  105. Firmware Version: MJAOA5F0
  106. User Capacity:    4,000,787,030,016 bytes [4,00 TB]
  107. Sector Sizes:     512 bytes logical, 4096 bytes physical
  108. Rotation Rate:    7200 rpm
  109. Form Factor:      3.5 inches
  110. Device is:        In smartctl database [for details use: -P show]
  111. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  112. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  113. Local Time is:    Sun May 22 23:08:54 2022 CEST
  114. SMART support is: Available - device has SMART capability.
  115. SMART support is: Enabled
  116.  
  117. === START OF READ SMART DATA SECTION ===
  118. SMART overall-health self-assessment test result: PASSED
  119.  
  120. General SMART Values:
  121. Offline data collection status:  (0x84) Offline data collection activity
  122.                                         was suspended by an interrupting command from host.
  123.                                         Auto Offline Data Collection: Enabled.
  124. Self-test execution status:      (   0) The previous self-test routine completed
  125.                                         without error or no self-test has ever
  126.                                         been run.
  127. Total time to complete Offline
  128. data collection:                (   24) seconds.
  129. Offline data collection
  130. capabilities:                    (0x5b) SMART execute Offline immediate.
  131.                                         Auto Offline data collection on/off support.
  132.                                         Suspend Offline collection upon new
  133.                                         command.
  134.                                         Offline surface scan supported.
  135.                                         Self-test supported.
  136.                                         No Conveyance Self-test supported.
  137.                                         Selective Self-test supported.
  138. SMART capabilities:            (0x0003) Saves SMART data before entering
  139.                                         power-saving mode.
  140.                                         Supports SMART auto save timer.
  141. Error logging capability:        (0x01) Error logging supported.
  142.                                         General Purpose Logging supported.
  143. Short self-test routine
  144. recommended polling time:        (   1) minutes.
  145. Extended self-test routine
  146. recommended polling time:        (   1) minutes.
  147. SCT capabilities:              (0x003d) SCT Status supported.
  148.                                         SCT Error Recovery Control supported.
  149.                                         SCT Feature Control supported.
  150.                                         SCT Data Table supported.
  151.  
  152. SMART Attributes Data Structure revision number: 16
  153. Vendor Specific SMART Attributes with Thresholds:
  154. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  155.   1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  156.   2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -       77
  157.   3 Spin_Up_Time            0x0007   129   129   024    Pre-fail  Always       -       571 (Average 629)
  158.   4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       81
  159.   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  160.   7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  161.   8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -       34
  162.   9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       5918
  163.  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
  164.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       81
  165. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       195
  166. 193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       195
  167. 194 Temperature_Celsius     0x0002   142   142   000    Old_age   Always       -       42 (Min/Max 23/50)
  168. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  169. 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
  170. 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
  171. 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
  172.  
  173. SMART Error Log Version: 1
  174. No Errors Logged
  175.  
  176. SMART Self-test log structure revision number 1
  177. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  178. # 1  Extended offline    Completed without error       00%         9         -
  179.  
  180. SMART Selective self-test log data structure revision number 1
  181.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  182.     1        0        0  Not_testing
  183.     2        0        0  Not_testing
  184.     3        0        0  Not_testing
  185.     4        0        0  Not_testing
  186.     5        0        0  Not_testing
  187. Selective self-test flags (0x0):
  188.   After scanning selected spans, do NOT read-scan remainder of disk.
  189. If Selective self-test is pending on power-up, resume after 0 minute delay.
  190.  
  191. ================================================================================================================================
  192.  
  193. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.53.1.el7.x86_64] (local build)
  194. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  195.  
  196. Read Device Identity failed: Input/output error
  197.  
  198. ================================================================================================================================
  199.  
  200. A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
  201. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.53.1.el7.x86_64] (local build)
  202. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  203.  
  204. === START OF INFORMATION SECTION ===
  205. Model Family:     Hitachi/HGST Ultrastar 7K4000
  206. Device Model:     Hitachi HUS724040ALE641
  207. Serial Number:    P4H3X04C
  208. LU WWN Device Id: 5 000cca 249cfddbe
  209. Firmware Version: MJAOA5F0
  210. User Capacity:    4,000,787,030,016 bytes [4,00 TB]
  211. Sector Sizes:     512 bytes logical, 4096 bytes physical
  212. Rotation Rate:    7200 rpm
  213. Form Factor:      3.5 inches
  214. Device is:        In smartctl database [for details use: -P show]
  215. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  216. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  217. Local Time is:    Sun May 22 23:09:43 2022 CEST
  218. SMART support is: Available - device has SMART capability.
  219. SMART support is: Enabled
  220.  
  221. === START OF READ SMART DATA SECTION ===
  222. SMART overall-health self-assessment test result: PASSED
  223.  
  224. General SMART Values:
  225. Offline data collection status:  (0x82) Offline data collection activity
  226.                                         was completed without error.
  227.                                         Auto Offline Data Collection: Enabled.
  228. Self-test execution status:      (   0) The previous self-test routine completed
  229.                                         without error or no self-test has ever
  230.                                         been run.
  231. Total time to complete Offline
  232. data collection:                (   24) seconds.
  233. Offline data collection
  234. capabilities:                    (0x5b) SMART execute Offline immediate.
  235.                                         Auto Offline data collection on/off support.
  236.                                         Suspend Offline collection upon new
  237.                                         command.
  238.                                         Offline surface scan supported.
  239.                                         Self-test supported.
  240.                                         No Conveyance Self-test supported.
  241.                                         Selective Self-test supported.
  242. SMART capabilities:            (0x0003) Saves SMART data before entering
  243.                                         power-saving mode.
  244.                                         Supports SMART auto save timer.
  245. Error logging capability:        (0x01) Error logging supported.
  246.                                         General Purpose Logging supported.
  247. Short self-test routine
  248. recommended polling time:        (   1) minutes.
  249. Extended self-test routine
  250. recommended polling time:        (   1) minutes.
  251. SCT capabilities:              (0x003d) SCT Status supported.
  252.                                         SCT Error Recovery Control supported.
  253.                                         SCT Feature Control supported.
  254.                                         SCT Data Table supported.
  255.  
  256. SMART Attributes Data Structure revision number: 16
  257. Vendor Specific SMART Attributes with Thresholds:
  258. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  259.   1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  260.   2 Throughput_Performance  0x0005   137   137   054    Pre-fail  Offline      -       79
  261.   3 Spin_Up_Time            0x0007   253   253   024    Pre-fail  Always       -       127 (Average 169)
  262.   4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       508
  263.   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  264.   7 Seek_Error_Rate         0x000b   091   091   067    Pre-fail  Always       -       131079
  265.   8 Seek_Time_Performance   0x0005   124   124   020    Pre-fail  Offline      -       33
  266.   9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       5906
  267.  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
  268.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       85
  269. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       602
  270. 193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       602
  271. 194 Temperature_Celsius     0x0002   133   133   000    Old_age   Always       -       45 (Min/Max 23/52)
  272. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  273. 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
  274. 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
  275. 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
  276.  
  277. SMART Error Log Version: 1
  278. ATA Error Count: 12 (device log contains only the most recent five errors)
  279.         CR = Command Register [HEX]
  280.         FR = Features Register [HEX]
  281.         SC = Sector Count Register [HEX]
  282.         SN = Sector Number Register [HEX]
  283.         CL = Cylinder Low Register [HEX]
  284.         CH = Cylinder High Register [HEX]
  285.         DH = Device/Head Register [HEX]
  286.         DC = Device Command Register [HEX]
  287.         ER = Error register [HEX]
  288.         ST = Status register [HEX]
  289. Powered_Up_Time is measured from power on, and printed as
  290. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  291. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  292.  
  293. Error 12 occurred at disk power-on lifetime: 5885 hours (245 days + 5 hours)
  294.   When the command that caused the error occurred, the device was in standby mode.
  295.  
  296.   After command completion occurred, registers were:
  297.   ER ST SC SN CL CH DH
  298.   -- -- -- -- -- -- --
  299.   10 51 40 40 33 f5 05  Error: IDNF at LBA = 0x05f53340 = 99955520
  300.  
  301.   Commands leading to the command that caused the error were:
  302.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  303.   -- -- -- -- -- -- -- --  ----------------  --------------------
  304.   60 80 20 80 8b 87 40 00      17:33:05.026  READ FPDMA QUEUED
  305.   60 80 08 00 8b 87 40 00      17:33:05.026  READ FPDMA QUEUED
  306.   60 80 f0 80 8a 87 40 00      17:33:05.026  READ FPDMA QUEUED
  307.   60 80 90 00 8a 87 40 00      17:33:05.026  READ FPDMA QUEUED
  308.   60 80 e8 80 89 87 40 00      17:33:05.026  READ FPDMA QUEUED
  309.  
  310. Error 11 occurred at disk power-on lifetime: 5885 hours (245 days + 5 hours)
  311.   When the command that caused the error occurred, the device was active or idle.
  312.  
  313.   After command completion occurred, registers were:
  314.   ER ST SC SN CL CH DH
  315.   -- -- -- -- -- -- --
  316.   10 51 38 c8 3a eb 02  Error: IDNF at LBA = 0x02eb3ac8 = 48970440
  317.  
  318.   Commands leading to the command that caused the error were:
  319.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  320.   -- -- -- -- -- -- -- --  ----------------  --------------------
  321.   61 80 60 80 3f eb c0 00      17:21:08.638  WRITE FPDMA QUEUED
  322.   61 80 98 00 3f eb c0 00      17:21:08.638  WRITE FPDMA QUEUED
  323.   61 80 88 80 3e eb c0 00      17:21:08.638  WRITE FPDMA QUEUED
  324.   61 80 a0 00 3e eb c0 00      17:21:08.637  WRITE FPDMA QUEUED
  325.   61 80 00 80 3d eb c0 00      17:21:08.637  WRITE FPDMA QUEUED
  326.  
  327. Error 10 occurred at disk power-on lifetime: 5879 hours (244 days + 23 hours)
  328.   When the command that caused the error occurred, the device was in standby mode.
  329.  
  330.   After command completion occurred, registers were:
  331.   ER ST SC SN CL CH DH
  332.   -- -- -- -- -- -- --
  333.   10 51 80 80 08 ee 02  Error: IDNF at LBA = 0x02ee0880 = 49154176
  334.  
  335.   Commands leading to the command that caused the error were:
  336.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  337.   -- -- -- -- -- -- -- --  ----------------  --------------------
  338.   61 08 20 10 08 00 c0 00      10:49:58.144  WRITE FPDMA QUEUED
  339.   61 80 98 80 0f ee c0 00      10:49:58.141  WRITE FPDMA QUEUED
  340.   61 80 40 00 0f ee c0 00      10:49:58.141  WRITE FPDMA QUEUED
  341.   61 80 88 80 0e ee c0 00      10:49:58.141  WRITE FPDMA QUEUED
  342.   61 80 00 00 0e ee c0 00      10:49:58.141  WRITE FPDMA QUEUED
  343.  
  344. Error 9 occurred at disk power-on lifetime: 5878 hours (244 days + 22 hours)
  345.   When the command that caused the error occurred, the device was active or idle.
  346.  
  347.   After command completion occurred, registers were:
  348.   ER ST SC SN CL CH DH
  349.   -- -- -- -- -- -- --
  350.   10 51 78 40 0f e2 02  Error: IDNF at LBA = 0x02e20f40 = 48369472
  351.  
  352.   Commands leading to the command that caused the error were:
  353.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  354.   -- -- -- -- -- -- -- --  ----------------  --------------------
  355.   61 38 18 80 0d e2 c0 00      10:40:34.474  WRITE FPDMA QUEUED
  356.   61 80 90 00 0d e2 c0 00      10:40:34.474  WRITE FPDMA QUEUED
  357.   61 80 f0 80 0c e2 c0 00      10:40:34.472  WRITE FPDMA QUEUED
  358.   61 80 68 00 0c e2 c0 00      10:40:34.472  WRITE FPDMA QUEUED
  359.   61 48 60 b8 0f e2 c0 00      10:40:34.470  WRITE FPDMA QUEUED
  360.  
  361. Error 8 occurred at disk power-on lifetime: 5878 hours (244 days + 22 hours)
  362.   When the command that caused the error occurred, the device was active or idle.
  363.  
  364.   After command completion occurred, registers were:
  365.   ER ST SC SN CL CH DH
  366.   -- -- -- -- -- -- --
  367.   10 51 48 b8 20 de 02  Error: IDNF at LBA = 0x02de20b8 = 48111800
  368.  
  369.   Commands leading to the command that caused the error were:
  370.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  371.   -- -- -- -- -- -- -- --  ----------------  --------------------
  372.   61 18 e8 00 ea dd c0 00      10:36:42.038  WRITE FPDMA QUEUED
  373.   61 68 18 98 e9 dd c0 00      10:36:42.038  WRITE FPDMA QUEUED
  374.   61 80 e0 18 e9 dd c0 00      10:36:42.038  WRITE FPDMA QUEUED
  375.   61 80 80 80 0b de c0 00      10:36:42.036  WRITE FPDMA QUEUED
  376.   61 80 58 00 0b de c0 00      10:36:42.036  WRITE FPDMA QUEUED
  377.  
  378. SMART Self-test log structure revision number 1
  379. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  380. # 1  Extended offline    Completed without error       00%         9         -
  381.  
  382. SMART Selective self-test log data structure revision number 1
  383.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  384.     1        0        0  Not_testing
  385.     2        0        0  Not_testing
  386.     3        0        0  Not_testing
  387.     4        0        0  Not_testing
  388.     5        0        0  Not_testing
  389. Selective self-test flags (0x0):
  390.   After scanning selected spans, do NOT read-scan remainder of disk.
  391. If Selective self-test is pending on power-up, resume after 0 minute delay.
  392.  
  393. ================================================================================================================================
  394.  
  395. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.53.1.el7.x86_64] (local build)
  396. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  397.  
  398. === START OF INFORMATION SECTION ===
  399. Model Family:     Hitachi/HGST Ultrastar 7K4000
  400. Device Model:     Hitachi HUS724040ALE641
  401. Serial Number:    PBGM5J6T
  402. LU WWN Device Id: 5 000cca 23dc8b7c8
  403. Firmware Version: MJAOA5F0
  404. User Capacity:    4,000,787,030,016 bytes [4,00 TB]
  405. Sector Sizes:     512 bytes logical, 4096 bytes physical
  406. Rotation Rate:    7200 rpm
  407. Form Factor:      3.5 inches
  408. Device is:        In smartctl database [for details use: -P show]
  409. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  410. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  411. Local Time is:    Sun May 22 23:09:49 2022 CEST
  412. SMART support is: Available - device has SMART capability.
  413. SMART support is: Enabled
  414.  
  415. === START OF READ SMART DATA SECTION ===
  416. SMART overall-health self-assessment test result: PASSED
  417.  
  418. General SMART Values:
  419. Offline data collection status:  (0x84) Offline data collection activity
  420.                                         was suspended by an interrupting command from host.
  421.                                         Auto Offline Data Collection: Enabled.
  422. Self-test execution status:      (   0) The previous self-test routine completed
  423.                                         without error or no self-test has ever
  424.                                         been run.
  425. Total time to complete Offline
  426. data collection:                (   24) seconds.
  427. Offline data collection
  428. capabilities:                    (0x5b) SMART execute Offline immediate.
  429.                                         Auto Offline data collection on/off support.
  430.                                         Suspend Offline collection upon new
  431.                                         command.
  432.                                         Offline surface scan supported.
  433.                                         Self-test supported.
  434.                                         No Conveyance Self-test supported.
  435.                                         Selective Self-test supported.
  436. SMART capabilities:            (0x0003) Saves SMART data before entering
  437.                                         power-saving mode.
  438.                                         Supports SMART auto save timer.
  439. Error logging capability:        (0x01) Error logging supported.
  440.                                         General Purpose Logging supported.
  441. Short self-test routine
  442. recommended polling time:        (   1) minutes.
  443. Extended self-test routine
  444. recommended polling time:        (   1) minutes.
  445. SCT capabilities:              (0x003d) SCT Status supported.
  446.                                         SCT Error Recovery Control supported.
  447.                                         SCT Feature Control supported.
  448.                                         SCT Data Table supported.
  449.  
  450. SMART Attributes Data Structure revision number: 16
  451. Vendor Specific SMART Attributes with Thresholds:
  452. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  453.   1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  454.   2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -       80
  455.   3 Spin_Up_Time            0x0007   253   253   024    Pre-fail  Always       -       116 (Average 130)
  456.   4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       3199
  457.   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  458.   7 Seek_Error_Rate         0x000b   082   082   067    Pre-fail  Always       -       1900558
  459.   8 Seek_Time_Performance   0x0005   121   121   020    Pre-fail  Offline      -       34
  460.   9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       5641
  461.  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
  462.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       83
  463. 192 Power-Off_Retract_Count 0x0032   098   098   000    Old_age   Always       -       3280
  464. 193 Load_Cycle_Count        0x0012   098   098   000    Old_age   Always       -       3280
  465. 194 Temperature_Celsius     0x0002   127   127   000    Old_age   Always       -       47 (Min/Max 23/54)
  466. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  467. 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
  468. 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
  469. 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
  470.  
  471. SMART Error Log Version: 1
  472. ATA Error Count: 115 (device log contains only the most recent five errors)
  473.         CR = Command Register [HEX]
  474.         FR = Features Register [HEX]
  475.         SC = Sector Count Register [HEX]
  476.         SN = Sector Number Register [HEX]
  477.         CL = Cylinder Low Register [HEX]
  478.         CH = Cylinder High Register [HEX]
  479.         DH = Device/Head Register [HEX]
  480.         DC = Device Command Register [HEX]
  481.         ER = Error register [HEX]
  482.         ST = Status register [HEX]
  483. Powered_Up_Time is measured from power on, and printed as
  484. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  485. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  486.  
  487. Error 115 occurred at disk power-on lifetime: 5622 hours (234 days + 6 hours)
  488.   When the command that caused the error occurred, the device was in standby mode.
  489.  
  490.   After command completion occurred, registers were:
  491.   ER ST SC SN CL CH DH
  492.   -- -- -- -- -- -- --
  493.   10 51 28 d8 cb f8 02  Error: IDNF at LBA = 0x02f8cbd8 = 49859544
  494.  
  495.   Commands leading to the command that caused the error were:
  496.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  497.   -- -- -- -- -- -- -- --  ----------------  --------------------
  498.   61 80 f0 80 69 f8 c0 00      19:55:53.413  WRITE FPDMA QUEUED
  499.   61 80 50 00 69 f8 c0 00      19:55:53.413  WRITE FPDMA QUEUED
  500.   61 80 20 80 68 f8 c0 00      19:55:53.412  WRITE FPDMA QUEUED
  501.   61 80 c0 00 68 f8 c0 00      19:55:53.412  WRITE FPDMA QUEUED
  502.   61 08 58 98 8b 35 c0 00      19:55:53.411  WRITE FPDMA QUEUED
  503.  
  504. Error 114 occurred at disk power-on lifetime: 5622 hours (234 days + 6 hours)
  505.   When the command that caused the error occurred, the device was active or idle.
  506.  
  507.   After command completion occurred, registers were:
  508.   ER ST SC SN CL CH DH
  509.   -- -- -- -- -- -- --
  510.   10 51 48 b8 84 f7 02  Error: IDNF at LBA = 0x02f784b8 = 49775800
  511.  
  512.   Commands leading to the command that caused the error were:
  513.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  514.   -- -- -- -- -- -- -- --  ----------------  --------------------
  515.   61 80 58 00 d3 f7 c0 00      19:54:19.801  WRITE FPDMA QUEUED
  516.   61 80 f0 80 d2 f7 c0 00      19:54:19.801  WRITE FPDMA QUEUED
  517.   61 80 d8 00 d2 f7 c0 00      19:54:19.793  WRITE FPDMA QUEUED
  518.   61 80 18 80 d1 f7 c0 00      19:54:19.792  WRITE FPDMA QUEUED
  519.   61 80 68 00 d1 f7 c0 00      19:54:19.792  WRITE FPDMA QUEUED
  520.  
  521. Error 113 occurred at disk power-on lifetime: 5621 hours (234 days + 5 hours)
  522.   When the command that caused the error occurred, the device was active or idle.
  523.  
  524.   After command completion occurred, registers were:
  525.   ER ST SC SN CL CH DH
  526.   -- -- -- -- -- -- --
  527.   10 51 80 80 64 5a 00  Error: IDNF at LBA = 0x005a6480 = 5923968
  528.  
  529.   Commands leading to the command that caused the error were:
  530.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  531.   -- -- -- -- -- -- -- --  ----------------  --------------------
  532.   60 80 e8 80 5d 35 40 00      19:09:52.306  READ FPDMA QUEUED
  533.   60 80 68 00 5d 35 40 00      19:09:52.302  READ FPDMA QUEUED
  534.   60 80 d8 e0 d8 c2 40 00      19:09:52.300  READ FPDMA QUEUED
  535.   60 80 60 60 d8 c2 40 00      19:09:52.300  READ FPDMA QUEUED
  536.   60 80 b0 80 dd c2 40 00      19:09:52.300  READ FPDMA QUEUED
  537.  
  538. Error 112 occurred at disk power-on lifetime: 5620 hours (234 days + 4 hours)
  539.   When the command that caused the error occurred, the device was active or idle.
  540.  
  541.   After command completion occurred, registers were:
  542.   ER ST SC SN CL CH DH
  543.   -- -- -- -- -- -- --
  544.   10 51 48 38 70 eb 02  Error: IDNF at LBA = 0x02eb7038 = 48984120
  545.  
  546.   Commands leading to the command that caused the error were:
  547.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  548.   -- -- -- -- -- -- -- --  ----------------  --------------------
  549.   61 80 30 80 7f eb c0 00      18:16:24.395  WRITE FPDMA QUEUED
  550.   61 80 20 00 7f eb c0 00      18:16:24.395  WRITE FPDMA QUEUED
  551.   61 80 10 80 7e eb c0 00      18:16:24.394  WRITE FPDMA QUEUED
  552.   61 80 88 00 7e eb c0 00      18:16:24.394  WRITE FPDMA QUEUED
  553.   61 80 50 80 7d eb c0 00      18:16:24.394  WRITE FPDMA QUEUED
  554.  
  555. Error 111 occurred at disk power-on lifetime: 5613 hours (233 days + 21 hours)
  556.   When the command that caused the error occurred, the device was active or idle.
  557.  
  558.   After command completion occurred, registers were:
  559.   ER ST SC SN CL CH DH
  560.   -- -- -- -- -- -- --
  561.   10 51 70 90 df ed 02  Error: IDNF at LBA = 0x02eddf90 = 49143696
  562.  
  563.   Commands leading to the command that caused the error were:
  564.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  565.   -- -- -- -- -- -- -- --  ----------------  --------------------
  566.   61 80 b8 80 df ed c0 00      10:49:43.985  WRITE FPDMA QUEUED
  567.   61 80 88 00 df ed c0 00      10:49:43.985  WRITE FPDMA QUEUED
  568.   61 80 10 80 de ed c0 00      10:49:43.984  WRITE FPDMA QUEUED
  569.   61 80 98 00 de ed c0 00      10:49:43.984  WRITE FPDMA QUEUED
  570.   61 80 e8 80 dd ed c0 00      10:49:43.984  WRITE FPDMA QUEUED
  571.  
  572. SMART Self-test log structure revision number 1
  573. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  574. # 1  Extended offline    Completed without error       00%         9         -
  575.  
  576. SMART Selective self-test log data structure revision number 1
  577.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  578.     1        0        0  Not_testing
  579.     2        0        0  Not_testing
  580.     3        0        0  Not_testing
  581.     4        0        0  Not_testing
  582.     5        0        0  Not_testing
  583. Selective self-test flags (0x0):
  584.   After scanning selected spans, do NOT read-scan remainder of disk.
  585. If Selective self-test is pending on power-up, resume after 0 minute delay.
  586.  
  587. ================================================================================================================================
  588.  
  589. smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.53.1.el7.x86_64] (local build)
  590. Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
  591.  
  592. === START OF INFORMATION SECTION ===
  593. Model Family:     Hitachi/HGST Ultrastar 7K4000
  594. Device Model:     Hitachi HUS724040ALE641
  595. Serial Number:    P4GVENSC
  596. LU WWN Device Id: 5 000cca 249cc04f6
  597. Firmware Version: MJAOA5F0
  598. User Capacity:    4,000,787,030,016 bytes [4,00 TB]
  599. Sector Sizes:     512 bytes logical, 4096 bytes physical
  600. Rotation Rate:    7200 rpm
  601. Form Factor:      3.5 inches
  602. Device is:        In smartctl database [for details use: -P show]
  603. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  604. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  605. Local Time is:    Sun May 22 23:08:40 2022 CEST
  606. SMART support is: Available - device has SMART capability.
  607. SMART support is: Enabled
  608.  
  609. === START OF READ SMART DATA SECTION ===
  610. SMART overall-health self-assessment test result: FAILED!
  611. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  612. See vendor-specific Attribute list for failed Attributes.
  613.  
  614. General SMART Values:
  615. Offline data collection status:  (0x82) Offline data collection activity
  616.                                         was completed without error.
  617.                                         Auto Offline Data Collection: Enabled.
  618. Self-test execution status:      (   0) The previous self-test routine completed
  619.                                         without error or no self-test has ever
  620.                                         been run.
  621. Total time to complete Offline
  622. data collection:                (   24) seconds.
  623. Offline data collection
  624. capabilities:                    (0x5b) SMART execute Offline immediate.
  625.                                         Auto Offline data collection on/off support.
  626.                                         Suspend Offline collection upon new
  627.                                         command.
  628.                                         Offline surface scan supported.
  629.                                         Self-test supported.
  630.                                         No Conveyance Self-test supported.
  631.                                         Selective Self-test supported.
  632. SMART capabilities:            (0x0003) Saves SMART data before entering
  633.                                         power-saving mode.
  634.                                         Supports SMART auto save timer.
  635. Error logging capability:        (0x01) Error logging supported.
  636.                                         General Purpose Logging supported.
  637. Short self-test routine
  638. recommended polling time:        (   1) minutes.
  639. Extended self-test routine
  640. recommended polling time:        (   1) minutes.
  641. SCT capabilities:              (0x003d) SCT Status supported.
  642.                                         SCT Error Recovery Control supported.
  643.                                         SCT Feature Control supported.
  644.                                         SCT Data Table supported.
  645.  
  646. SMART Attributes Data Structure revision number: 16
  647. Vendor Specific SMART Attributes with Thresholds:
  648. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  649.   1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  650.   2 Throughput_Performance  0x0005   112   112   054    Pre-fail  Offline      -       163
  651.   3 Spin_Up_Time            0x0007   253   253   024    Pre-fail  Always       -       106 (Average 133)
  652.   4 Start_Stop_Count        0x0012   001   001   000    Old_age   Always       -       569908
  653.   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  654.   7 Seek_Error_Rate         0x000b   031   031   067    Pre-fail  Always   FAILING_NOW 36045286
  655.   8 Seek_Time_Performance   0x0005   119   119   020    Pre-fail  Offline      -       35
  656.   9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       5700
  657.  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
  658.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       83
  659. 192 Power-Off_Retract_Count 0x0032   046   046   000    Old_age   Always       -       65535
  660. 193 Load_Cycle_Count        0x0012   001   001   000    Old_age   Always       -       569932
  661. 194 Temperature_Celsius     0x0002   122   122   000    Old_age   Always       -       49 (Min/Max 23/54)
  662. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
  663. 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
  664. 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
  665. 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
  666.  
  667. SMART Error Log Version: 1
  668. ATA Error Count: 2542 (device log contains only the most recent five errors)
  669.         CR = Command Register [HEX]
  670.         FR = Features Register [HEX]
  671.         SC = Sector Count Register [HEX]
  672.         SN = Sector Number Register [HEX]
  673.         CL = Cylinder Low Register [HEX]
  674.         CH = Cylinder High Register [HEX]
  675.         DH = Device/Head Register [HEX]
  676.         DC = Device Command Register [HEX]
  677.         ER = Error register [HEX]
  678.         ST = Status register [HEX]
  679. Powered_Up_Time is measured from power on, and printed as
  680. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  681. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  682.  
  683. Error 2542 occurred at disk power-on lifetime: 5699 hours (237 days + 11 hours)
  684.   When the command that caused the error occurred, the device was active or idle.
  685.  
  686.   After command completion occurred, registers were:
  687.   ER ST SC SN CL CH DH
  688.   -- -- -- -- -- -- --
  689.   10 51 10 a8 e3 35 08  Error: IDNF at LBA = 0x0835e3a8 = 137749416
  690.  
  691.   Commands leading to the command that caused the error were:
  692.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  693.   -- -- -- -- -- -- -- --  ----------------  --------------------
  694.   60 80 40 80 23 3b 40 00   1d+13:15:29.186  READ FPDMA QUEUED
  695.   60 80 78 00 23 3b 40 00   1d+13:15:29.185  READ FPDMA QUEUED
  696.   60 08 78 f8 8f d3 40 00   1d+13:15:29.185  READ FPDMA QUEUED
  697.   61 10 30 a8 e3 35 c0 00   1d+13:15:29.184  WRITE FPDMA QUEUED
  698.   60 20 78 d8 8f d3 40 00   1d+13:15:29.184  READ FPDMA QUEUED
  699.  
  700. Error 2541 occurred at disk power-on lifetime: 5699 hours (237 days + 11 hours)
  701.   When the command that caused the error occurred, the device was active or idle.
  702.  
  703.   After command completion occurred, registers were:
  704.   ER ST SC SN CL CH DH
  705.   -- -- -- -- -- -- --
  706.   10 51 01 08 08 00 00  Error: IDNF at LBA = 0x00000808 = 2056
  707.  
  708.   Commands leading to the command that caused the error were:
  709.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  710.   -- -- -- -- -- -- -- --  ----------------  --------------------
  711.   61 01 f0 08 08 00 c0 00   1d+13:07:44.635  WRITE FPDMA QUEUED
  712.   61 08 f0 10 08 00 c0 00   1d+13:07:44.626  WRITE FPDMA QUEUED
  713.   61 01 f0 08 08 00 c0 00   1d+13:07:44.602  WRITE FPDMA QUEUED
  714.   61 08 f0 10 08 00 c0 00   1d+13:07:41.452  WRITE FPDMA QUEUED
  715.   60 80 f0 80 bb 22 40 00   1d+13:07:40.746  READ FPDMA QUEUED
  716.  
  717. Error 2540 occurred at disk power-on lifetime: 5699 hours (237 days + 11 hours)
  718.   When the command that caused the error occurred, the device was active or idle.
  719.  
  720.   After command completion occurred, registers were:
  721.   ER ST SC SN CL CH DH
  722.   -- -- -- -- -- -- --
  723.   10 51 01 08 08 00 00  Error: IDNF at LBA = 0x00000808 = 2056
  724.  
  725.   Commands leading to the command that caused the error were:
  726.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  727.   -- -- -- -- -- -- -- --  ----------------  --------------------
  728.   61 01 60 08 08 00 c0 00   1d+13:05:56.467  WRITE FPDMA QUEUED
  729.   61 08 60 10 08 00 c0 00   1d+13:05:52.335  WRITE FPDMA QUEUED
  730.   60 80 68 80 a7 1d 40 00   1d+13:05:51.957  READ FPDMA QUEUED
  731.   60 80 f0 00 a7 1d 40 00   1d+13:05:51.957  READ FPDMA QUEUED
  732.   60 80 f0 80 a6 1d 40 00   1d+13:05:51.955  READ FPDMA QUEUED
  733.  
  734. Error 2539 occurred at disk power-on lifetime: 5698 hours (237 days + 10 hours)
  735.   When the command that caused the error occurred, the device was active or idle.
  736.  
  737.   After command completion occurred, registers were:
  738.   ER ST SC SN CL CH DH
  739.   -- -- -- -- -- -- --
  740.   10 51 01 08 08 00 00  Error: IDNF at LBA = 0x00000808 = 2056
  741.  
  742.   Commands leading to the command that caused the error were:
  743.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  744.   -- -- -- -- -- -- -- --  ----------------  --------------------
  745.   61 01 a8 08 08 00 c0 00   1d+12:42:56.995  WRITE FPDMA QUEUED
  746.   61 08 a8 10 08 00 c0 00   1d+12:42:54.130  WRITE FPDMA QUEUED
  747.   60 18 78 00 9c 9e 40 00   1d+12:42:54.117  READ FPDMA QUEUED
  748.   60 80 00 80 88 d6 40 00   1d+12:42:53.770  READ FPDMA QUEUED
  749.   60 80 78 00 88 d6 40 00   1d+12:42:53.770  READ FPDMA QUEUED
  750.  
  751. Error 2538 occurred at disk power-on lifetime: 5696 hours (237 days + 8 hours)
  752.   When the command that caused the error occurred, the device was active or idle.
  753.  
  754.   After command completion occurred, registers were:
  755.   ER ST SC SN CL CH DH
  756.   -- -- -- -- -- -- --
  757.   10 51 01 08 08 00 00  Error: IDNF at LBA = 0x00000808 = 2056
  758.  
  759.   Commands leading to the command that caused the error were:
  760.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  761.   -- -- -- -- -- -- -- --  ----------------  --------------------
  762.   61 01 b8 08 08 00 c0 00   1d+09:58:42.968  WRITE FPDMA QUEUED
  763.   61 08 b8 10 08 00 c0 00   1d+09:58:39.330  WRITE FPDMA QUEUED
  764.   60 08 e8 40 10 64 40 00   1d+09:58:38.908  READ FPDMA QUEUED
  765.   60 08 d8 10 10 04 40 00   1d+09:58:38.908  READ FPDMA QUEUED
  766.   60 08 d8 48 8f 6c 40 00   1d+09:58:38.898  READ FPDMA QUEUED
  767.  
  768. SMART Self-test log structure revision number 1
  769. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  770. # 1  Extended offline    Completed without error       00%         9         -
  771.  
  772. SMART Selective self-test log data structure revision number 1
  773.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  774.     1        0        0  Not_testing
  775.     2        0        0  Not_testing
  776.     3        0        0  Not_testing
  777.     4        0        0  Not_testing
  778.     5        0        0  Not_testing
  779. Selective self-test flags (0x0):
  780.   After scanning selected spans, do NOT read-scan remainder of disk.
  781. If Selective self-test is pending on power-up, resume after 0 minute delay.
  782.