1. ▒DDR Version V1.13 20220218
2. ln
3. ddrconfig:0
4. LPDDR4X, 324MHz
5. BW=32 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=4096MB
6. tdqss: cs0 dqs0: 24ps, dqs1: -72ps, dqs2: -24ps, dqs3: -72ps,
7.  
8. change to: 324MHz
9. PHY drv:clk:36,ca:36,DQ:29,odt:0
10. vrefinner:24%, vrefout:41%
11. dram drv:40,odt:0
12. clk skew:0x60
13.  
14. change to: 528MHz
15. PHY drv:clk:36,ca:36,DQ:29,odt:0
16. vrefinner:24%, vrefout:41%
17. dram drv:40,odt:0
18. clk skew:0x58
19.  
20. change to: 780MHz
21. PHY drv:clk:36,ca:36,DQ:29,odt:0
22. vrefinner:24%, vrefout:41%
23. dram drv:40,odt:0
24. clk skew:0x58
25.  
26. change to: 1560MHz(final freq)
27. PHY drv:clk:36,ca:36,DQ:29,odt:60
28. vrefinner:16%, vrefout:22%
29. dram drv:40,odt:80
30. vref_ca:00000071
31. clk skew:0x12
32. cs 0:
33. the read training result:
34. DQS0:0x32, DQS1:0x32, DQS2:0x35, DQS3:0x2f,
35. min  : 0xf  0xf  0x7  0x3  0x7  0x6  0xe  0xb , 0x7  0x3  0x2  0x3  0x9  0xf 0x13  0xd ,
36.        0xd  0xb  0xb  0x9  0x7  0x1  0x9  0x8 , 0x2  0x3  0x8  0x2  0x9  0x7  0x4  0x3 ,
37. mid  :0x28 0x2a 0x21 0x1e 0x20 0x21 0x27 0x26 ,0x21 0x1e 0x1c 0x1f 0x23 0x2b 0x2d 0x28 ,
38.       0x27 0x26 0x26 0x24 0x23 0x1d 0x24 0x23 ,0x1d 0x1d 0x23 0x1d 0x24 0x23 0x1f 0x1e ,
39. max  :0x41 0x46 0x3b 0x39 0x3a 0x3d 0x41 0x42 ,0x3b 0x39 0x37 0x3b 0x3d 0x48 0x48 0x44 ,
40.       0x42 0x42 0x42 0x40 0x3f 0x39 0x40 0x3f ,0x39 0x37 0x3e 0x39 0x3f 0x3f 0x3a 0x3a ,
41. range:0x32 0x37 0x34 0x36 0x33 0x37 0x33 0x37 ,0x34 0x36 0x35 0x38 0x34 0x39 0x35 0x37 ,
42.       0x35 0x37 0x37 0x37 0x38 0x38 0x37 0x37 ,0x37 0x34 0x36 0x37 0x36 0x38 0x36 0x37 ,
43. the write training result:
44. DQS0:0x16, DQS1:0x4, DQS2:0xe, DQS3:0x4,
45. min  :0x65 0x69 0x60 0x5c 0x5e 0x5e 0x65 0x67 0x6a ,0x4b 0x48 0x47 0x49 0x4e 0x54 0x56 0x54 0x4d ,
46.       0x53 0x52 0x53 0x51 0x4d 0x4b 0x4e 0x51 0x51 ,0x43 0x44 0x4b 0x45 0x4b 0x49 0x46 0x49 0x49 ,
47. mid  :0x7f 0x82 0x7a 0x76 0x78 0x78 0x7f 0x80 0x82 ,0x67 0x62 0x61 0x62 0x69 0x6f 0x6f 0x6d 0x68 ,
48.       0x6f 0x6f 0x6e 0x6d 0x69 0x63 0x69 0x6b 0x6c ,0x5d 0x5f 0x66 0x60 0x67 0x63 0x5f 0x62 0x62 ,
49. max  :0x9a 0x9c 0x95 0x91 0x92 0x93 0x99 0x9a 0x9b ,0x83 0x7c 0x7b 0x7c 0x84 0x8a 0x89 0x87 0x83 ,
50.       0x8c 0x8c 0x89 0x8a 0x86 0x7c 0x84 0x86 0x87 ,0x77 0x7a 0x82 0x7c 0x83 0x7e 0x79 0x7c 0x7c ,
51. range:0x35 0x33 0x35 0x35 0x34 0x35 0x34 0x33 0x31 ,0x38 0x34 0x34 0x33 0x36 0x36 0x33 0x33 0x36 ,
52.       0x39 0x3a 0x36 0x39 0x39 0x31 0x36 0x35 0x36 ,0x34 0x36 0x37 0x37 0x38 0x35 0x33 0x33 0x33 ,
53. CA Training result:
54. cs:0 min  :0x3b 0x38 0x32 0x32 0x37 0x2d 0x38 ,0x3c 0x36 0x38 0x32 0x38 0x2f 0x3b ,
55. cs:0 mid  :0x78 0x7a 0x6e 0x74 0x73 0x6e 0x64 ,0x78 0x75 0x75 0x72 0x74 0x6e 0x68 ,
56. cs:0 max  :0xb5 0xbd 0xaa 0xb6 0xaf 0xaf 0x91 ,0xb5 0xb5 0xb3 0xb3 0xb1 0xae 0x95 ,
57. cs:0 range:0x7a 0x85 0x78 0x84 0x78 0x82 0x59 ,0x79 0x7f 0x7b 0x81 0x79 0x7f 0x5a ,
58. out
59. rockchip_sdram_size fdc20208 10000201
60. rank 1 cs0_col 10 bk 3 cs0_row 17 bw 2 row_3_4 0
61. SDRAM base=0, size=100000000
62.  
63. U-Boot SPL 2022.04-rc2 (Nov 09 2022 - 00:02:16 +0000)
64. saradc@fe720000: Can't update Vdd. Error: -38saradc@fe720000: Can't update Vss. Error: -38powerdomain init.
65. rockchip_sdhci_probe clk set rate fail!
66. Trying to boot from MMC1
67. INFO:    Preloader serial: 2
68. NOTICE:  BL31: v2.3():v2.3-152-g4e725b15f:cl
69. NOTICE:  BL31: Built : 10:51:13, Jul 15 2021
70. INFO:    GICv3 without legacy support detected.
71. INFO:    ARM GICv3 driver initialized in EL3
72. INFO:    pmu v1 is valid
73. INFO:    dfs DDR fsp_param[0].freq_mhz= 1560MHz
74. INFO:    dfs DDR fsp_param[1].freq_mhz= 324MHz
75. INFO:    dfs DDR fsp_param[2].freq_mhz= 528MHz
76. INFO:    dfs DDR fsp_param[3].freq_mhz= 780MHz
77. INFO:    Using opteed sec cpu_context!
78. INFO:    boot cpu mask: 0
79. INFO:    BL31: Initializing runtime services
80. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
81. ERROR:   Error initializing runtime service opteed_fast
82. INFO:    BL31: Preparing for EL3 exit to normal world
83. INFO:    Entry point address = 0xa00000
84. INFO:    SPSR = 0x3c9
85.  
86.  
87. U-Boot 2022.04-rc2 (Nov 09 2022 - 00:02:16 +0000)
88.  
89. Model: Pine64 RK3566 SoQuartz with CM4-IO Carrier Board
90. DRAM:  rockchip_sdram_size fdc20208 10000201
91. rank 1 cs0_col 10 bk 3 cs0_row 17 bw 2 row_3_4 0
92. SDRAM base=0, size=100000000
93. 3.7 GiB
94. PMIC:  RK8090 (on=0x10, off=0x00)
95. Core:  289 devices, 18 uclasses, devicetree: separate
96. MMC:   rockchip_sdhci_probe clk set rate fail!
97. mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0
98. Loading Environment from nowhere... OK
99. In:    serial@fe660000
100. Out:   serial@fe660000
101. Err:   serial@fe660000
102. Model: Pine64 RK3566 SoQuartz with CM4-IO Carrier Board
103. Net:   No ethernet found.
104. Hit any key to stop autoboot:  0
105. switch to partitions #0, OK
106. mmc1 is current device
107. Scanning mmc 1:1...
108. Found /boot/extlinux/extlinux.conf
109. Retrieving file: /boot/extlinux/extlinux.conf
110. 1:      Boot primary OS
111. Retrieving file: /boot/vmlinuz
112. append: earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 console=tty1 root=PARTUUID=b9157314-01 rootfstype=ext4 rootwait fsck.repair=yes net.ifnames=0 systemd.unified_cgroup_hierarchy=0
113. Retrieving file: /boot/rk3566-soquartz-cm4.dtb
114. Moving Image from 0x2080000 to 0x2200000, end=45b0000
115. ## Flattened Device Tree blob at 0a100000
116.    Booting using the fdt blob at 0xa100000
117.    Loading Device Tree to 00000000ededa000, end 00000000edee9f09 ... OK
118.  
119. Starting kernel ...
120.  
121. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
122. [    0.000000] Linux version 6.1.0-rc1 (root@runner-7gzwldlw-project-27231216-concurrent-0) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 10.2.1 20201103, GNU ld (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 2.35.1.20201028) #1 SMP PREEMPT Wed Nov  9 01:08:14 UTC 2022
123. [    0.000000] Machine model: Pine64 RK3566 SoQuartz with CM4-IO Carrier Board
124. [    0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
125. [    0.000000] printk: bootconsole [uart8250] enabled
126. [    0.000000] efi: UEFI not found.
127. [    0.000000] NUMA: No NUMA configuration found
128. [    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000efffffff]
129. [    0.000000] NUMA: NODE_DATA [mem 0xef829a00-0xef82bfff]
130. [    0.000000] Zone ranges:
131. [    0.000000]   DMA      [mem 0x0000000000200000-0x00000000efffffff]
132. [    0.000000]   DMA32    empty
133. [    0.000000]   Normal   empty
134. [    0.000000] Movable zone start for each node
135. [    0.000000] Early memory node ranges
136. [    0.000000]   node   0: [mem 0x0000000000200000-0x00000000efffffff]
137. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
138. [    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
139. [    0.000000] cma: Reserved 32 MiB at 0x00000000e8200000
140. [    0.000000] psci: probing for conduit method from DT.
141. [    0.000000] psci: PSCIv1.1 detected in firmware.
142. [    0.000000] psci: Using standard PSCI v0.2 function IDs
143. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
144. [    0.000000] psci: SMC Calling Convention v1.2
145. [    0.000000] percpu: Embedded 28 pages/cpu s75688 r8192 d30808 u114688
146. [    0.000000] pcpu-alloc: s75688 r8192 d30808 u114688 alloc=28*4096
147. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
148. [    0.000000] Detected VIPT I-cache on CPU0
149. [    0.000000] CPU features: detected: GIC system register CPU interface
150. [    0.000000] CPU features: detected: Virtualization Host Extensions
151. [    0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
152. [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
153. [    0.000000] alternatives: applying boot alternatives
154. [    0.000000] Fallback order for Node 0: 0
155. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 967176
156. [    0.000000] Policy zone: DMA
157. [    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 console=tty1 root=PARTUUID=b9157314-01 rootfstype=ext4 rootwait fsck.repair=yes net.ifnames=0 systemd.unified_cgroup_hierarchy=0
158. [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
159. [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
160. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
161. [    0.000000] Memory: 3784684K/3930112K available (19136K kernel code, 3158K rwdata, 6976K rodata, 6400K init, 702K bss, 112660K reserved, 32768K cma-reserved)
162. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
163. [    0.000000] ftrace: allocating 60326 entries in 236 pages
164. [    0.000000] ftrace: allocated 236 pages with 5 groups
165. [    0.000000] trace event string verifier disabled
166. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
167. [    0.000000] rcu:     RCU event tracing is enabled.
168. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
169. [    0.000000]  Trampoline variant of Tasks RCU enabled.
170. [    0.000000]  Rude variant of Tasks RCU enabled.
171. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
172. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
173. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
174. [    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
175. [    0.000000] GICv3: 320 SPIs implemented
176. [    0.000000] GICv3: 0 Extended SPIs implemented
177. [    0.000000] GICv3: MBI range [296:319]
178. [    0.000000] GICv3: Using MBI frame 0x00000000fd410000
179. [    0.000000] Root IRQ handler: gic_handle_irq
180. [    0.000000] GICv3: GICv3 features: 16 PPIs
181. [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
182. [    0.000000] ITS: No ITS available, not enabling LPIs
183. [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
184. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
185. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
186. [    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
187. [    0.001535] Console: colour dummy device 80x25
188. [    0.001991] printk: console [tty1] enabled
189. [    0.002469] printk: bootconsole [uart8250] disabled
190. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
191. [    0.000000] Linux version 6.1.0-rc1 (root@runner-7gzwldlw-project-27231216-concurrent-0) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 10.2.1 20201103, GNU ld (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 2.35.1.20201028) #1 SMP PREEMPT Wed Nov  9 01:08:14 UTC 2022
192. [    0.000000] Machine model: Pine64 RK3566 SoQuartz with CM4-IO Carrier Board
193. [    0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
194. [    0.000000] printk: bootconsole [uart8250] enabled
195. [    0.000000] efi: UEFI not found.
196. [    0.000000] NUMA: No NUMA configuration found
197. [    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000efffffff]
198. [    0.000000] NUMA: NODE_DATA [mem 0xef829a00-0xef82bfff]
199. [    0.000000] Zone ranges:
200. [    0.000000]   DMA      [mem 0x0000000000200000-0x00000000efffffff]
201. [    0.000000]   DMA32    empty
202. [    0.000000]   Normal   empty
203. [    0.000000] Movable zone start for each node
204. [    0.000000] Early memory node ranges
205. [    0.000000]   node   0: [mem 0x0000000000200000-0x00000000efffffff]
206. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
207. [    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
208. [    0.000000] cma: Reserved 32 MiB at 0x00000000e8200000
209. [    0.000000] psci: probing for conduit method from DT.
210. [    0.000000] psci: PSCIv1.1 detected in firmware.
211. [    0.000000] psci: Using standard PSCI v0.2 function IDs
212. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
213. [    0.000000] psci: SMC Calling Convention v1.2
214. [    0.000000] percpu: Embedded 28 pages/cpu s75688 r8192 d30808 u114688
215. [    0.000000] pcpu-alloc: s75688 r8192 d30808 u114688 alloc=28*4096
216. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
217. [    0.000000] Detected VIPT I-cache on CPU0
218. [    0.000000] CPU features: detected: GIC system register CPU interface
219. [    0.000000] CPU features: detected: Virtualization Host Extensions
220. [    0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
221. [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
222. [    0.000000] alternatives: applying boot alternatives
223. [    0.000000] Fallback order for Node 0: 0
224. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 967176
225. [    0.000000] Policy zone: DMA
226. [    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 console=tty1 root=PARTUUID=b9157314-01 rootfstype=ext4 rootwait fsck.repair=yes net.ifnames=0 systemd.unified_cgroup_hierarchy=0
227. [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
228. [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
229. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
230. [    0.000000] Memory: 3784684K/3930112K available (19136K kernel code, 3158K rwdata, 6976K rodata, 6400K init, 702K bss, 112660K reserved, 32768K cma-reserved)
231. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
232. [    0.000000] ftrace: allocating 60326 entries in 236 pages
233. [    0.000000] ftrace: allocated 236 pages with 5 groups
234. [    0.000000] trace event string verifier disabled
235. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
236. [    0.000000] rcu:     RCU event tracing is enabled.
237. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
238. [    0.000000]  Trampoline variant of Tasks RCU enabled.
239. [    0.000000]  Rude variant of Tasks RCU enabled.
240. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
241. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
242. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
243. [    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
244. [    0.000000] GICv3: 320 SPIs implemented
245. [    0.000000] GICv3: 0 Extended SPIs implemented
246. [    0.000000] GICv3: MBI range [296:319]
247. [    0.000000] GICv3: Using MBI frame 0x00000000fd410000
248. [    0.000000] Root IRQ handler: gic_handle_irq
249. [    0.000000] GICv3: GICv3 features: 16 PPIs
250. [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
251. [    0.000000] ITS: No ITS available, not enabling LPIs
252. [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
253. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
254. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
255. [    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
256. [    0.001535] Console: colour dummy device 80x25
257. [    0.001991] printk: console [tty1] enabled
258. [    0.002469] printk: bootconsole [uart8250] disabled
259. [    0.003071] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
260. [    0.003112] pid_max: default: 32768 minimum: 301
261. [    0.003225] LSM: Security Framework initializing
262. [    0.003401] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
263. [    0.003454] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
264. [    0.004920] cacheinfo: Unable to detect cache hierarchy for CPU 0
265. [    0.006176] cblist_init_generic: Setting adjustable number of callback queues.
266. [    0.006208] cblist_init_generic: Setting shift to 2 and lim to 1.
267. [    0.006380] cblist_init_generic: Setting shift to 2 and lim to 1.
268. [    0.006833] rcu: Hierarchical SRCU implementation.
269. [    0.006855] rcu:     Max phase no-delay instances is 1000.
270. [    0.007802] EFI services will not be available.
271. [    0.008516] smp: Bringing up secondary CPUs ...
272. [    0.009516] Detected VIPT I-cache on CPU1
273. [    0.009633] cacheinfo: Unable to detect cache hierarchy for CPU 1
274. [    0.009653] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
275. [    0.009717] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
276. [    0.010930] Detected VIPT I-cache on CPU2
277. [    0.011029] cacheinfo: Unable to detect cache hierarchy for CPU 2
278. [    0.011047] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
279. [    0.011093] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
280. [    0.012152] Detected VIPT I-cache on CPU3
281. [    0.012251] cacheinfo: Unable to detect cache hierarchy for CPU 3
282. [    0.012270] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
283. [    0.012312] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
284. [    0.012480] smp: Brought up 1 node, 4 CPUs
285. [    0.012642] SMP: Total of 4 processors activated.
286. [    0.012662] CPU features: detected: 32-bit EL0 Support
287. [    0.012679] CPU features: detected: 32-bit EL1 Support
288. [    0.012698] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
289. [    0.012722] CPU features: detected: Common not Private translations
290. [    0.012739] CPU features: detected: CRC32 instructions
291. [    0.012760] CPU features: detected: RCpc load-acquire (LDAPR)
292. [    0.012778] CPU features: detected: LSE atomic instructions
293. [    0.012794] CPU features: detected: Privileged Access Never
294. [    0.012812] CPU features: detected: RAS Extension Support
295. [    0.012832] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
296. [    0.012956] CPU: All CPU(s) started at EL2
297. [    0.012980] alternatives: applying system-wide alternatives
298. [    0.019587] devtmpfs: initialized
299. [    0.036860] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
300. [    0.036930] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
301. [    0.038244] pinctrl core: initialized pinctrl subsystem
302. [    0.038809] regulator-dummy: no parameters, enabled
303. [    0.039393] DMI not present or invalid.
304. [    0.040286] NET: Registered PF_NETLINK/PF_ROUTE protocol family
305. [    0.042190] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
306. [    0.042483] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
307. [    0.042873] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32
308. [    0.426766] tun: Universal TUN/TAP device driver, 1.6
309. [    0.427646] e100: Intel(R) PRO/100 Network Driver
310. [    0.428085] e100: Copyright(c) 1999-2006 Intel Corporation
311. [    0.428673] e1000: Intel(R) PRO/1000 Network Driver
312. [    0.429125] e1000: Copyright (c) 1999-2006 Intel Corporation.
313. [    0.429723] e1000e: Intel(R) PRO/1000 Network Driver
314. [    0.430180] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
315. [    0.430826] igb: Intel(R) Gigabit Ethernet Network Driver
316. [    0.431324] igb: Copyright (c) 2007-2014 Intel Corporation.
317. [    0.431903] Intel(R) 2.5G Ethernet Linux Driver
318. [    0.432324] Copyright(c) 2018 Intel Corporation.
319. [    0.432807] igbvf: Intel(R) Gigabit Virtual Function Network Driver
320. [    0.433378] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
321. [    0.433971] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
322. [    0.434549] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
323. [    0.435460] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver
324. [    0.436168] ixgbevf: Copyright (c) 2009 - 2018 Intel Corporation.
325. [    0.436975] i40e: Intel(R) Ethernet Connection XL710 Network Driver
326. [    0.437552] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
327. [    0.438375] ixgb: Intel(R) PRO/10GbE Network Driver
328. [    0.438871] ixgb: Copyright (c) 1999-2008 Intel Corporation.
329. [    0.439468] iavf: Intel(R) Ethernet Adaptive Virtual Function Network Driver
330. [    0.440110] Copyright (c) 2013 - 2018 Intel Corporation.
331. [    0.440845] Intel(R) Ethernet Switch Host Interface Driver
332. [    0.441350] Copyright(c) 2013 - 2019 Intel Corporation.
333. [    0.442095] ice: Intel(R) Ethernet Connection E800 Series Linux Driver
334. [    0.442724] ice: Copyright (c) 2018, Intel Corporation.
335. [    0.445090] usbcore: registered new interface driver rtl8192cu
336. [    0.446165] usbcore: registered new interface driver rtl8xxxu
337. [    0.447026] usbcore: registered new interface driver ax88179_178a
338. [    0.447976] VFIO - User Level meta-driver version: 0.3
339. [    0.455273] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
340. [    0.455829] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
341. [    0.456705] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports
342. [    0.457265] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000002002010010
343. [    0.458189] xhci-hcd xhci-hcd.0.auto: irq 33, io mem 0xfcc00000
344. [    0.460112] hub 1-0:1.0: USB hub found
345. [    0.460519] hub 1-0:1.0: 1 port detected
346. [    0.461591] usbcore: registered new interface driver usb-storage
347. [    0.463815] i2c_dev: i2c /dev entries driver
348. [    0.472680] rtc rtc0: Power loss detected, invalid time
349. [    0.473462] rtc-pcf85063 1-0051: registered as rtc0
350. [    0.474952] rtc rtc0: Power loss detected, invalid time
351. [    0.475439] rtc-pcf85063 1-0051: hctosys: unable to read the hardware clock
352. [    0.477140] arm-scmi firmware:scmi: Failed. SCMI protocol 21 not active.
353. [    0.479725] rockchip-thermal fe710000.tsadc: Missing tshut mode property, using default (gpio)
354. [    0.480525] rockchip-thermal fe710000.tsadc: Missing tshut-polarity property, using default (low)
355. [    0.484728] cpu cpu0: Looking up cpu-supply from device tree
356. [    0.485526] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active.
357. [    0.487608] sdhci: Secure Digital Host Controller Interface driver
358. [    0.488178] sdhci: Copyright(c) Pierre Ossman
359. [    0.488968] Synopsys Designware Multimedia Card Interface Driver
360. [    0.490026] sdhci-pltfm: SDHCI platform and OF driver helper
361. [    0.493136] ledtrig-cpu: registered to indicate activity on CPUs
362. [    0.494572] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
363. [    0.495289] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
364. [    0.496431] usbcore: registered new interface driver usbhid
365. [    0.496947] usbhid: USB HID core driver
366. [    0.498614] SPI driver st-accel-spi has no spi_device_id for st,lis302dl-spi
367. [    0.499263] ] vcc_5v: could not add device link regulator.4: -ENOENT
368. [    0.596741] vbus: 5000 mV, enabled
369. [    0.597280] reg-fixed-voltage vbus-regulator: vbus supplying 5000000uV
370. [    0.598187] reg-fixed-voltage vcc5v0-sys-regulator: Looking up vin-supply from device tree
371. [    0.599024] vcc5v0_sys: supplied by vbus
372. [    0.599400] vbus: could not add device link regulator.5: -ENOENT
373. [    0.600014] vcc5v0_sys: 5000 mV, enabled
374. [    0.600598] reg-fixed-voltage vcc5v0-sys-regulator: vcc5v0_sys supplying 5000000uV
375. [    0.601568] reg-fixed-voltage vcc3v3-sys-regulator: Looking up vin-supply from device tree
376. [    0.602335] vcc3v3_sys: supplied by vcc5v0_sys
377. [    0.602783] vcc5v0_sys: could not add device link regulator.6: -ENOENT
378. [    0.603472] vcc3v3_sys: 3300 mV, enabled
379. [    0.604034] reg-fixed-voltage vcc3v3-sys-regulator: vcc3v3_sys supplying 3300000uV
380. [    0.606639] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
381. [    0.607310] fan53555-regulator 0-001c: Looking up vin-supply from device tree
382. [    0.607974] vdd_cpu: supplied by vcc5v0_sys
383. [    0.608367] vcc5v0_sys: could not add device link regulator.7: -ENOENT
384. [    0.612292] vdd_cpu: 800 <--> 1150 mV at 1025 mV, enabled
385. [    0.615196] rk808 0-0020: chip id: 0x8090
386. [    0.693805] rk808-regulator rk808-regulator: there is no dvs0 gpio
387. [    0.694422] rk808-regulator rk808-regulator: there is no dvs1 gpio
388. [    0.695132] rk808 0-0020: Looking up vcc1-supply from device tree
389. [    0.695839] vdd_logic: supplied by vcc3v3_sys
390. [    0.696251] vcc3v3_sys: could not add device link regulator.8: -ENOENT
391. [    0.701185] vdd_logic: 500 <--> 1350 mV at 900 mV, enabled
392. [    0.702570] rk808 0-0020: Looking up vcc2-supply from device tree
393. [    0.703145] vdd_gpu: supplied by vcc3v3_sys
394. [    0.703541] vcc3v3_sys: could not add device link regulator.9: -ENOENT
395. [    0.707943] vdd_gpu: 500 <--> 1350 mV at 900 mV, enabled
396. [    0.709243] rk808 0-0020: Looking up vcc3-supply from device tree
397. [    0.709819] vcc_ddr: supplied by vcc3v3_sys
398. [    0.710215] vcc3v3_sys: could not add device link regulator.10: -ENOENT
399. [    0.713709] vcc_ddr: at 500 mV, enabled
400. [    0.714533] usb 1-1: new high-speed USB device number 2 using xhci-hcd
401. [    0.714877] rk808 0-0020: Looking up vcc4-supply from device tree
402. [    0.715708] vdd_npu: supplied by vcc3v3_sys
403. [    0.716112] vcc3v3_sys: could not add device link regulator.11: -ENOENT
404. [    0.720048] vdd_npu: 500 <--> 1350 mV at 900 mV, enabled
405. [    0.721346] rk808 0-0020: Looking up vcc9-supply from device tree
406. [    0.721922] vcc_1v8: supplied by vcc3v3_sys
407. [    0.722316] vcc3v3_sys: could not add device link regulator.12: -ENOENT
408. [    0.725790] vcc_1v8: 1800 mV, enabled
409. [    0.726951] rk808 0-0020: Looking up vcc5-supply from device tree
410. [    0.727526] vdda0v9_image: supplied by vcc3v3_sys
411. [    0.727966] vcc3v3_sys: could not add device link regulator.13: -ENOENT
412. [    0.731952] vdda0v9_image: 900 mV, enabled
413. [    0.733143] rk808 0-0020: Looking up vcc5-supply from device tree
414. [    0.733720] vdda_0v9: supplied by vcc3v3_sys
415. [    0.734120] vcc3v3_sys: could not add device link regulator.14: -ENOENT
416. [    0.737645] vdda_0v9: 900 mV, enabled
417. [    0.738811] rk808 0-0020: Looking up vcc5-supply from device tree
418. [    0.739386] vdda0v9_pmu: supplied by vcc3v3_sys
419. [    0.739811] vcc3v3_sys: could not add device link regulator.15: -ENOENT
420. [    0.743790] vdda0v9_pmu: 900 mV, enabled
421. [    0.744993] rk808 0-0020: Looking up vcc6-supply from device tree
422. [    0.745568] vccio_acodec: supplied by vcc3v3_sys
423. [    0.746000] vcc3v3_sys: could not add device link regulator.16: -ENOENT
424. [    0.749516] vccio_acodec: 3300 mV, enabled
425. [    0.750733] rk808 0-0020: Looking up vcc6-supply from device tree
426. [    0.751309] vccio_sd: supplied by vcc3v3_sys
427. [    0.751710] vcc3v3_sys: could not add device link regulator.17: -ENOENT
428. [    0.755687] vccio_sd: 1800 <--> 3300 mV at 3300 mV, enabled
429. [    0.757028] rk808 0-0020: Looking up vcc6-supply from device tree
430. [    0.757603] vcc3v3_pmu: supplied by vcc3v3_sys
431. [    0.758021] vcc3v3_sys: could not add device link regulator.18: -ENOENT
432. [    0.762008] vcc3v3_pmu: 3300 mV, enabled
433. [    0.763211] rk808 0-0020: Looking up vcc7-supply from device tree
434. [    0.763789] vcca_1v8: supplied by vcc3v3_sys
435. [    0.764191] vcc3v3_sys: could not add device link regulator.19: -ENOENT
436. [    0.767681] vcca_1v8: 1800 mV, enabled
437. [    0.768859] rk808 0-0020: Looking up vcc7-supply from device tree
438. [    0.769434] vcca1v8_pmu: supplied by vcc3v3_sys
439. [    0.769860] vcc3v3_sys: could not add device link regulator.20: -ENOENT
440. [    0.773378] vcca1v8_pmu: 1800 mV, enabled
441. [    0.774601] rk808 0-0020: Looking up vcc7-supply from device tree
442. [    0.775176] vcca1v8_image: supplied by vcc3v3_sys
443. [    0.775614] vcc3v3_sys: could not add device link regulator.21: -ENOENT
444. [    0.779106] vcca1v8_image: 1800 mV, enabled
445. [    0.781309] vcc_3v3: no parameters, enabled
446. [    0.781907] rk808 0-0020: Looking up vcc9-supply from device tree
447. [    0.782519] vcc_3v3: supplied by vcc3v3_sys
448. [    0.783520] SWITCH_REG2: no parameters, enabled
449. [    0.784134] rk808 0-0020: Looking up vcc8-supply from device tree
450. [    0.784709] SWITCH_REG2: supplied by vcc3v3_sys
451. [    0.791648] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
452. [    0.805053] rk808-rtc rk808-rtc: registered as rtc1
453. [    0.806742] cpu cpu0: Looking up cpu-supply from device tree
454. [    0.813944] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply from device tree
455. [    0.814337] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
456. [    0.815434] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
457. [    0.815879] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio2-supply from device tree
458. [    0.816023] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
459. [    0.817000] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio1-supply from device tree
460. [    0.817350] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 63,32 bit host data width,256 deep fifo
461. [    0.818216] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply from device tree
462. [    0.819040] dwmmc_rockchip fe2b0000.mmc: Looking up vmmc-supply from device tree
463. [    0.820494] dwmmc_rockchip fe2b0000.mmc: Looking up vqmmc-supply from device tree
464. [    0.820762] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio3-supply from device tree
465. [    0.822344] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
466. [    0.822359] sdhci-dwcmshc fe310000.mmc: Looking up vmmc-supply from device tree
467. [    0.822386] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
468. [    0.824234] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
469. [    0.824770] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 64,32 bit host data width,256 deep fifo
470. [    0.825724] dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply from device tree
471. [    0.826538] mmc_host mmc0: card is polling.
472. [    0.826613] sdhci-dwcmshc fe310000.mmc: Looking up vqmmc-supply from device tree
473. [    0.826967] dwmmc_rockchip fe2c0000.mmc: Looking up vqmmc-supply from device tree
474. [    0.827013] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio4-supply from device tree
475. [    0.827988] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio5-supply from device tree
476. [    0.829126] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq
477. [    0.829959] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio6-supply from device tree
478. [    0.830325] mmc_host mmc2: card is non-removable.
479. [    0.830440] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio7-supply from device tree
480. [    0.830910] sdhci-dwcmshc fe310000.mmc: Disabling HS200/HS400, frequency too low (375000)
481. [    0.835088] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
482. [    0.835799] rk_gmac-dwmac fe010000.ethernet: Looking up phy-supply from device tree
483. [    0.836600] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
484. [    0.837229] rk_gmac-dwmac fe010000.ethernet: TX delay(0x30).
485. [    0.837732] rk_gmac-dwmac fe010000.ethernet: RX delay(0x10).
486. [    0.838240] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
487. [    0.838843] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
488. [    0.842017] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
489. [    0.844398] rk_gmac-dwmac fe010000.ethernet: init for RGMII
490. [    0.845103] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
491. [    0.845744] rk_gmac-dwmac fe010000.ethernet:         DWMAC4/5
492. [    0.846206] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
493. [    0.846895] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
494. [    0.847558] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
495. [    0.847641] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
496. [    0.848180] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
497. [    0.849610] rk_gmac-dwmac fe010000.ethernet: TSO supported
498. [    0.850099] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
499. [    0.850827] rk_gmac-dwmac fe010000.ethernet: device MAC address f6:d1:5b:5b:06:b8
500. [    0.851494] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10)
501. [    0.8521
502. [    0.921774] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
503. [    0.923105] mmc0: new high speed SDXC card at address aaaa
504. [    0.924245] mmcblk0: mmc0:aaaa SN64G 59.5 GiB
505. [    0.927278]  mmcblk0: p1
506. [    0.974275] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
507. [    0.989006] cfg80211: Loading compiled-in X.509 certificates for regulatory database
508. [    0.991186] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
509. [    0.991889] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
510. [    0.992655] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
511. [    1.056932] ALSA device list:
512. [    1.057230]   No soundcards found.
513. [    1.067751] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none.
514. [    1.068597] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
515. [    1.076487] devtmpfs: mounted
516. [    1.083681] Freeing unused kernel memory: 6400K
517. [    1.084319] Run /sbin/init as init process
518. [    1.084691]   with arguments:
519. [    1.084961]     /sbin/init
520. [    1.085207]   with environment:
521. [    1.085491]     HOME=/
522. [    1.085706]     TERM=linux
523. [    1.194573] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
524. [    1.222826] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 223
525. [    1.236475] mmc2: new ultra high speed SDR104 SDIO card at address 0001
526. [    1.424057] input: Logitech USB Receiver as /devices/platform/fcc00000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52B.0001/input/input1
527. [    1.484302] hid-generic 0003:046D:C52B.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input0
528. [    1.492087] input: Logitech USB Receiver Mouse as /devices/platform/fcc00000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input2
529. [    1.494453] input: Logitech USB Receiver Consumer Control as /devices/platform/fcc00000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input3
530. [    1.555693] input: Logitech USB Receiver System Control as /devices/platform/fcc00000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input4
531. [    1.557733] hid-generic 0003:046D:C52B.0002: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input1
532. [    1.563324] hid-generic 0003:046D:C52B.0003: device has no listeners, quitting
533. [    1.642629] usb 1-1.2: new low-speed USB device number 4 using xhci-hcd
534. [    1.667309] systemd[1]: System time before build time, advancing clock.
535. [    1.821368] NET: Registered PF_INET6 protocol family
536. [    1.823923] Segment Routing with IPv6
537. [    1.824318] In-situ OAM (IOAM) with IPv6
538. [    1.842774] input:   USB Keyboard as /devices/platform/fcc00000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:05AF:0802.0004/input/input6
539. [    1.854576] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
540. [    1.857741] systemd[1]: Detected architecture arm64.
541. [    1.903392] hid-generic 0003:05AF:0802.0004: input: USB HID v1.11 Keyboard [  USB Keyboard] on usb-xhci-hcd.0.auto-1.2/input0
542. [    1.914876] input:   USB Keyboard System Control as /devices/platform/fcc00000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:05AF:0802.0005/input/input7
543. [    1.975562] input:   USB Keyboard Consumer Control as /devices/platform/fcc00000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:05AF:0802.0005/input/input8
544. [    1.977367] hid-generic 0003:05AF:0802.0005: input: USB HID v1.11 Device [  USB Keyboard] on usb-xhci-hcd.0.auto-1.2/input1
545. [    1.977909] systemd[1]: Set hostname to <DietPi>.
546. [    2.092089] dw-apb-uart fe660000.serial: forbid DMA for kernel console
547. [    2.518719] systemd[1]: Queued start job for default target Graphical Interface.
548. [    7.126494] random: crng init done
549. [    7.127047] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
550. [    7.128146] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
551. [    7.176607] systemd[1]: Created slice system-getty.slice.
552. [    7.179008] systemd[1]: Created slice system-modprobe.slice.
553. [    7.181003] systemd[1]: Created slice system-serial\x2dgetty.slice.
554. [    7.182030] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
555. [    7.183267] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
556. [    7.184170] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
557. [    7.185295] systemd[1]: Reached target Local Encrypted Volumes.
558. [    7.186073] systemd[1]: Reached target Paths.
559. [    7.186656] systemd[1]: Reached target Remote File Systems.
560. [    7.187290] systemd[1]: Reached target Slices.
561. [    7.188304] systemd[1]: Listening on fsck to fsckd communication Socket.
562. [    7.189270] systemd[1]: Listening on initctl Compatibility Named Pipe.
563. [    7.190563] systemd[1]: Listening on Journal Audit Socket.
564. [    7.191639] systemd[1]: Listening on Journal Socket (/dev/log).
565. [    7.192735] systemd[1]: Listening on Journal Socket.
566. [    7.195177] systemd[1]: Listening on udev Control Socket.
567. [    7.196271] systemd[1]: Listening on udev Kernel Socket.
568. [    7.196943] systemd[1]: Reached target Sockets.
569. [    7.200942] systemd[1]: Mounting Huge Pages File System...
570. [    7.205644] systemd[1]: Mounting POSIX Message Queue File System...
571. [    7.211023] systemd[1]: Mounting Kernel Debug File System...
572. [    7.215883] systemd[1]: Mounting Kernel Trace File System...
573. [    7.221934] systemd[1]: Starting Restore / save the current clock...
574. [    7.226889] systemd[1]: Starting Set the console keyboard layout...
575. [    7.232025] systemd[1]: Starting Create list of static device nodes for the current kernel...
576. [    7.237300] systemd[1]: Starting Load Kernel Module configfs...
577. [    7.241921] systemd[1]: Starting Load Kernel Module fuse...
578. [    7.261904] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
579. [    7.267658] systemd[1]: Starting File System Check on Root Device...
580. [    7.274737] systemd[1]: Starting Journal Service...
581. [    7.287958] systemd[1]: Starting Load Kernel Modules...
582. [    7.294853] systemd[1]: Starting Coldplug All udev Devices...
583. [    7.295299] fuse: init (API version 7.37)
584. [    7.308501] systemd[1]: Mounted Huge Pages File System.
585. [    7.313876] systemd[1]: Mounted POSIX Message Queue File System.
586. [    7.315348] systemd[1]: Mounted Kernel Debug File System.
587. [    7.316771] systemd[1]: Mounted Kernel Trace File System.
588. [    7.320815] systemd[1]: Finished Create list of static device nodes for the current kernel.
589. [    7.323352] systemd[1]: [email protected]: Succeeded.
590. [    7.326035] systemd[1]: Finished Load Kernel Module configfs.
591. [    7.329923] systemd[1]: Finished Restore / save the current clock.
592. [    7.332216] systemd[1]: [email protected]: Succeeded.
593. [    7.334686] systemd[1]: Finished Load Kernel Module fuse.
594. [    7.375464] systemd[1]: Mounting FUSE Control File System...
595. [    7.382868] systemd[1]: Mounting Kernel Configuration File System...
596. [    7.389858] systemd[1]: Started File System Check Daemon to report status.
597. [    7.400378] systemd[1]: Finished Load Kernel Modules.
598. [    7.401713] systemd[1]: Mounted FUSE Control File System.
599. [    7.403219] systemd[1]: Mounted Kernel Configuration File System.
600. [    7.409092] systemd[1]: Starting Apply Kernel Variables...
601. [    8.557168] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
602. [    8.559907] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
603. [    8.594440] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
604. [    8.607048] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.pine64,soquartz-cm4io.bin failed with error -2
605. [    8.608114] brcmfmac mmc2:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43455-sdio.pine64,soquartz-cm4io.bin
606. [    8.907270] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Sep 18 2020 02:27:58 version 7.45.221 (3a6d3a0 CY) FWID 01-bbd9282b
607. [   10.568750] EXT4-fs (mmcblk0p1): Invalid checksum for backup superblock 32768
608. [   10.568750]
609. [   10.569552] EXT4-fs error (device mmcblk0p1) in ext4_update_backup_sb:174: Filesystem failed CRC
610. [   10.570335] Aborting journal on device mmcblk0p1-8.
611. [   10.573327] EXT4-fs (mmcblk0p1): Remounting filesystem read-only
612. [   10.573887] EXT4-fs error (device mmcblk0p1) in ext4_update_backup_sb:174: Journal has aborted