1.  Glass factories will encounter several irregular tempered glass orders,for these unique orders,tempering operator must pay out consideration to beneath points and make certain very good tempering top quality.
2.  https://es.cnmorn.com/recubrimiento-lowe-de-la-ma%C3%B1ana.html with holes and notches
3.  The holes situation,diameter and notches ought to comply with below need,or the glass will be effortless to crack during tempering method.
4.  a.Distance in between gap edge to glass edge ought to be at minimum 1.five instances that of glass thickness_3-6mm.
5.  
6.  Length amongst gap edge to glass edge must be at minimum 2 instances that of glass thickness_8-19mm.
7.  b.Glass Min width is 8 instances that of glass thickness.
8.  Min gap diameter is 5mm or glass thickness,Max holes diameter shouldn’t be greater than one/3 that of glass width.
9.  c.Min length among glass corner and holes corner is four times that of glass thickness.
10.  
11.  d.There ought to be spherical arc in Glass notches or sharp corners,and Min radius is glass thickness.
12.  
13.  e.Heat instances for Glass with notches or holes should be 2.five% longer than typical glass panels,if equally holes or notches exists,heating time is 5% for a longer time than standard
14.  glass.
15.  2.Glass with sharp corners(<30′),heating time is 2.5% longer than normal glass and radius corners is required at glass corners.
16.  3.Pattern glass.The pattern side position is at top and glass surface at bottom,and heating time is decided by the Max glass thickness.
17.  4.Tinted glass:Heating time is 5% shorter than normal clear glass.
18.  5.Coated glass-reflective glass or low e glass:The coating is at glass top and glass side at bottom during tempering process.No waters or fingerprint is allowed at
19.  glass coating.The top heating temperature is 5-10 degrees than bottom and heating time is 2.5%-10% longer.
20.  6.Thick glass-15,19mm glass.
21.  https://es.cnmorn.com/Introducci%C3%B3n-de-vidrio-bajo-e.html for thick glass tempering is much higher than normal glass.
22.  a.Select good glass sheets,avoid bubbles,stones inside glass.
23.  b.It’s recommended to polish the thick glass before tempering to eliminate the tiny giriff.
24.  c.Tempering temperature should be 670-675 degrees and bottom temperature is 690-700 degrees.
25.  Morn is your turnkey tempered glass supplier from China,welcome contact us for more info.
26.  Tags: coated glass tempering, glass holes, glass notches, glass processing, glass tempering temperature, low e glass tempering, morn building materials, pattern glass, Special glass tempering, tempered glass supplier, tinted glass
27.  
28.  About Morn Building Materials:
29.  Morn Building Materials Co.,Ltd is trading company offering the right facade materials for a wide range of applications for architectural,design and system requirements.Cooperating with China premium glass fabricators,Morn is able to supply whatever glass products applied in facade,Spandrel ,roof ,handrail,partition,balustrade,canopy,greenhouse,sun room ,interior exterior application.
30.  
31.  Other facade materials:Aluminium alloy profiles,aluminium plates,aluminium windows&doors,Assa Abloy hardware,spider fitting,railing systems,shower rooms,polyurethane panels,machines&tools,steel structure, are also available since 2019.
32.  From aesthetics, to strict environmental and energy specifications, to critical budget and delivery requirements, our input can make a difference.
33.  Contact us:
34.  Qingdao Morn Building Materials Co.,Ltd
35.  China HQ: Room A304,Shengxifu Road,NO.209 Weihai Road,Shibei District,Qingdao,China,266024
36.  Sales Email: [email protected]
37.  Technical support: [email protected]
38.  Mobile/Wechat: 0086-17705464660
39.  Website:https://www.cnmorn.com/
40.