1. # Example config file /etc/vsftpd.conf
2. #
3. # The default compiled in settings are fairly paranoid. This sample file
4. # loosens things up a bit, to make the ftp daemon more usable.
5. # Please see vsftpd.conf.5 for all compiled in defaults.
6. #
7. # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
8. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
9. # capabilities.
10. #
11. #
12. # Run standalone?  vsftpd can run either from an inetd or as a standalone
13. # daemon started from an initscript.
14. listen=YES
15. #
16. # This directive enables listening on IPv6 sockets. By default, listening
17. # on the IPv6 "any" address (::) will accept connections from both IPv6
18. # and IPv4 clients. It is not necessary to listen on *both* IPv4 and IPv6
19. # sockets. If you want that (perhaps because you want to listen on specific
20. # addresses) then you must run two copies of vsftpd with two configuration
21. # files.
22. #listen_ipv6=NO
23. #
24. # Allow anonymous FTP? (Disabled by default).
25. anonymous_enable=YES
26. anon_root=/anon/
27. #
28. # Uncomment this to allow local users to log in.
29. local_enable=YES
30. #
31. # Uncomment this to enable any form of FTP write command.
32. write_enable=YES
33. #
34. # Default umask for local users is 077. You may wish to change this to 022,
35. # if your users expect that (022 is used by most other ftpd's)
36. #local_umask=022
37. #
38. # Uncomment this to allow the anonymous FTP user to upload files. This only
39. # has an effect if the above global write enable is activated. Also, you will
40. # obviously need to create a directory writable by the FTP user.
41. anon_upload_enable=NO
42. #
43. # Uncomment this if you want the anonymous FTP user to be able to create
44. # new directories.
45. anon_mkdir_write_enable=NO
46. #
47. # Activate directory messages - messages given to remote users when they
48. # go into a certain directory.
49. dirmessage_enable=YES
50. #
51. # If enabled, vsftpd will display directory listings with the time
52. # in  your  local  time  zone.  The default is to display GMT. The
53. # times returned by the MDTM FTP command are also affected by this
54. # option.
55. use_localtime=YES
56. #
57. # Activate logging of uploads/downloads.
58. xferlog_enable=YES
59. #
60. # Make sure PORT transfer connections originate from port 20 (ftp-data).
61. connect_from_port_20=YES
62. #
63. # If you want, you can arrange for uploaded anonymous files to be owned by
64. # a different user. Note! Using "root" for uploaded files is not
65. # recommended!
66. #chown_uploads=YES
67. #chown_username=whoever
68. #
69. # You may override where the log file goes if you like. The default is shown
70. # below.
71. #xferlog_file=/var/log/vsftpd.log
72. #
73. # If you want, you can have your log file in standard ftpd xferlog format.
74. # Note that the default log file location is /var/log/xferlog in this case.
75. #xferlog_std_format=YES
76. #
77. # You may change the default value for timing out an idle session.
78. #idle_session_timeout=600
79. #
80. # You may change the default value for timing out a data connection.
81. #data_connection_timeout=120
82. #
83. # It is recommended that you define on your system a unique user which the
84. # ftp server can use as a totally isolated and unprivileged user.
85. #nopriv_user=ftpsecure
86. #
87. # Enable this and the server will recognise asynchronous ABOR requests. Not
88. # recommended for security (the code is non-trivial). Not enabling it,
89. # however, may confuse older FTP clients.
90. #async_abor_enable=YES
91. #
92. # By default the server will pretend to allow ASCII mode but in fact ignore
93. # the request. Turn on the below options to have the server actually do ASCII
94. # mangling on files when in ASCII mode.
95. # Beware that on some FTP servers, ASCII support allows a denial of service
96. # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
97. # predicted this attack and has always been safe, reporting the size of the
98. # raw file.
99. # ASCII mangling is a horrible feature of the protocol.
100. #ascii_upload_enable=YES
101. #ascii_download_enable=YES
102. #
103. # You may fully customise the login banner string:
104. #ftpd_banner=Welcome to blah FTP service.
105. #
106. # You may specify a file of disallowed anonymous e-mail addresses. Apparently
107. # useful for combatting certain DoS attacks.
108. #deny_email_enable=YES
109. # (default follows)
110. #banned_email_file=/etc/vsftpd.banned_emails
111. #
112. # You may restrict local users to their home directories.  See the FAQ for
113. # the possible risks in this before using chroot_local_user or
114. # chroot_list_enable below.
115. #chroot_local_user=YES
116. #
117. # You may specify an explicit list of local users to chroot() to their home
118. # directory. If chroot_local_user is YES, then this list becomes a list of
119. # users to NOT chroot().
120. # (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
121. # the user does not have write access to the top level directory within the
122. # chroot)
123. chroot_local_user=YES
124. chroot_list_enable=YES
125. # (default follows)
126. chroot_list_file=/etc/vsftpd.chroot_list
127. allow_writeable_chroot=YES
128. #
129. # You may activate the "-R" option to the builtin ls. This is disabled by
130. # default to avoid remote users being able to cause excessive I/O on large
131. # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
132. # the presence of the "-R" option, so there is a strong case for enabling it.
133. #ls_recurse_enable=YES
134. #
135. # Customization
136. #
137. # Some of vsftpd's settings don't fit the filesystem layout by
138. # default.
139. #
140. # This option should be the name of a directory which is empty.  Also, the
141. # directory should not be writable by the ftp user. This directory is used
142. # as a secure chroot() jail at times vsftpd does not require filesystem
143. # access.
144. secure_chroot_dir=/var/run/vsftpd/empty
145. #
146. # This string is the name of the PAM service vsftpd will use.
147. pam_service_name=vsftpd
148. #
149. # This option specifies the location of the RSA certificate to use for SSL
150. # encrypted connections.
151. rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
152. rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
153. ssl_enable=NO
154. #
155. # Uncomment this to indicate that vsftpd use a utf8 filesystem.
156. #utf8_filesystem=YES
157. #
158. pasv_enable=YES
159. pasv_max_port=10100
160. pasv_min_port=10090
161. #pasv_addr_resolve=NO
162. #pasv_address=192.168.203.215
163. #port_enable=YES