1. DDR Version V1.13 20220218
2. ln
3. ddrconfig:0
4. LPDDR4X, 324MHz
5. BW=32 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=4096MB
6. tdqss: cs0 dqs0: 24ps, dqs1: -72ps, dqs2: -24ps, dqs3: -72ps,
7.  
8. change to: 324MHz
9. PHY drv:clk:36,ca:36,DQ:29,odt:0
10. vrefinner:24%, vrefout:41%
11. dram drv:40,odt:0
12. clk skew:0x60
13.  
14. change to: 528MHz
15. PHY drv:clk:36,ca:36,DQ:29,odt:0
16. vrefinner:24%, vrefout:41%
17. dram drv:40,odt:0
18. clk skew:0x58
19.  
20. change to: 780MHz
21. PHY drv:clk:36,ca:36,DQ:29,odt:0
22. vrefinner:24%, vrefout:41%
23. dram drv:40,odt:0
24. clk skew:0x58
25.  
26. change to: 1560MHz(final freq)
27. PHY drv:clk:36,ca:36,DQ:29,odt:60
28. vrefinner:16%, vrefout:22%
29. dram drv:40,odt:80
30. vref_ca:00000071
31. clk skew:0x12
32. cs 0:
33. the read training result:
34. DQS0:0x32, DQS1:0x31, DQS2:0x35, DQS3:0x2e,
35. min  :0x10  0xf  0x7  0x3  0x7  0x7  0xe  0xb , 0x6  0x0  0x1  0x2  0x7  0xd 0x12  0xc ,
36.        0xd  0xb  0xb  0x9  0x7  0x2  0x9  0x9 , 0x1  0x2  0x7  0x0  0x9  0x5  0x3  0x2 ,
37. mid  :0x29 0x2a 0x21 0x1e 0x20 0x21 0x27 0x26 ,0x1f 0x1b 0x1b 0x1d 0x21 0x29 0x2c 0x27 ,
38.       0x27 0x26 0x26 0x24 0x22 0x1e 0x24 0x24 ,0x1c 0x1c 0x22 0x1b 0x24 0x21 0x1e 0x1d ,
39. max  :0x42 0x45 0x3b 0x39 0x3a 0x3c 0x41 0x42 ,0x39 0x37 0x35 0x39 0x3b 0x46 0x46 0x42 ,
40.       0x42 0x42 0x42 0x40 0x3e 0x3a 0x40 0x3f ,0x37 0x37 0x3d 0x37 0x3f 0x3e 0x39 0x39 ,
41. range:0x32 0x36 0x34 0x36 0x33 0x35 0x33 0x37 ,0x33 0x37 0x34 0x37 0x34 0x39 0x34 0x36 ,
42.       0x35 0x37 0x37 0x37 0x37 0x38 0x37 0x36 ,0x36 0x35 0x36 0x37 0x36 0x39 0x36 0x37 ,
43. the write training result:
44. DQS0:0x16, DQS1:0x4, DQS2:0xe, DQS3:0x4,
45. min  :0x65 0x69 0x60 0x5c 0x5e 0x5e 0x65 0x67 0x6a ,0x4b 0x48 0x47 0x49 0x4e 0x54 0x56 0x54 0x4d ,
46.       0x53 0x53 0x53 0x52 0x4d 0x4a 0x4e 0x51 0x51 ,0x43 0x44 0x4b 0x45 0x4b 0x49 0x47 0x48 0x49 ,
47. mid  :0x80 0x82 0x7a 0x76 0x78 0x78 0x7f 0x80 0x83 ,0x67 0x62 0x61 0x62 0x69 0x6f 0x70 0x6e 0x68 ,
48.       0x6f 0x6f 0x6e 0x6e 0x69 0x63 0x69 0x6b 0x6c ,0x5d 0x5f 0x66 0x60 0x67 0x63 0x60 0x62 0x62 ,
49. max  :0x9b 0x9c 0x95 0x91 0x93 0x93 0x99 0x9a 0x9c ,0x83 0x7c 0x7b 0x7c 0x84 0x8a 0x8a 0x88 0x84 ,
50.       0x8c 0x8c 0x89 0x8a 0x86 0x7c 0x84 0x86 0x88 ,0x77 0x7a 0x82 0x7c 0x83 0x7e 0x7a 0x7c 0x7c ,
51. range:0x36 0x33 0x35 0x35 0x35 0x35 0x34 0x33 0x32 ,0x38 0x34 0x34 0x33 0x36 0x36 0x34 0x34 0x37 ,
52.       0x39 0x39 0x36 0x38 0x39 0x32 0x36 0x35 0x37 ,0x34 0x36 0x37 0x37 0x38 0x35 0x33 0x34 0x33 ,
53. CA Training result:
54. cs:0 min  :0x3a 0x38 0x32 0x32 0x38 0x2d 0x38 ,0x3d 0x36 0x38 0x32 0x38 0x2f 0x3b ,
55. cs:0 mid  :0x77 0x7a 0x6e 0x74 0x73 0x6e 0x64 ,0x79 0x75 0x76 0x72 0x74 0x6e 0x68 ,
56. cs:0 max  :0xb5 0xbc 0xab 0xb6 0xae 0xaf 0x91 ,0xb5 0xb5 0xb4 0xb3 0xb1 0xae 0x95 ,
57. cs:0 range:0x7b 0x84 0x79 0x84 0x76 0x82 0x59 ,0x78 0x7f 0x7c 0x81 0x79 0x7f 0x5a ,
58. out
59. rockchip_sdram_size fdc20208 10000201
60. rank 1 cs0_col 10 bk 3 cs0_row 17 bw 2 row_3_4 0
61. SDRAM base=0, size=100000000
62.  
63. U-Boot SPL 2022.04-rc2 (Nov 09 2022 - 00:02:16 +0000)
64. saradc@fe720000: Can't update Vdd. Error: -38saradc@fe720000: Can't update Vss. Error: -38powerdomain init.
65. rockchip_sdhci_probe clk set rate fail!
66. Trying to boot from MMC2
67. INFO:    Preloader serial: 2
68. NOTICE:  BL31: v2.3():v2.3-152-g4e725b15f:cl
69. NOTICE:  BL31: Built : 10:51:13, Jul 15 2021
70. INFO:    GICv3 without legacy support detected.
71. INFO:    ARM GICv3 driver initialized in EL3
72. INFO:    pmu v1 is valid
73. INFO:    dfs DDR fsp_param[0].freq_mhz= 1560MHz
74. INFO:    dfs DDR fsp_param[1].freq_mhz= 324MHz
75. INFO:    dfs DDR fsp_param[2].freq_mhz= 528MHz
76. INFO:    dfs DDR fsp_param[3].freq_mhz= 780MHz
77. INFO:    Using opteed sec cpu_context!
78. INFO:    boot cpu mask: 0
79. INFO:    BL31: Initializing runtime services
80. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
81. ERROR:   Error initializing runtime service opteed_fast
82. INFO:    BL31: Preparing for EL3 exit to normal world
83. INFO:    Entry point address = 0xa00000
84. INFO:    SPSR = 0x3c9
85.  
86.  
87. U-Boot 2022.04-rc2 (Nov 09 2022 - 00:02:16 +0000)
88.  
89. Model: Pine64 RK3566 SoQuartz with CM4-IO Carrier Board
90. DRAM:  rockchip_sdram_size fdc20208 10000201
91. rank 1 cs0_col 10 bk 3 cs0_row 17 bw 2 row_3_4 0
92. SDRAM base=0, size=100000000
93. 3.7 GiB
94. PMIC:  RK8090 (on=0x10, off=0x00)
95. Core:  289 devices, 18 uclasses, devicetree: separate
96. MMC:   rockchip_sdhci_probe clk set rate fail!
97. mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0
98. Loading Environment from nowhere... OK
99. In:    serial@fe660000
100. Out:   serial@fe660000
101. Err:   serial@fe660000
102. Model: Pine64 RK3566 SoQuartz with CM4-IO Carrier Board
103. Net:   No ethernet found.
104. Hit any key to stop autoboot:  0
105. Card did not respond to voltage select! : -110
106. switch to partitions #0, OK
107. mmc0(part 0) is current device
108. Scanning mmc 0:1...
109. Found /boot/extlinux/extlinux.conf
110. Retrieving file: /boot/extlinux/extlinux.conf
111. 1:      Boot primary OS
112. Retrieving file: /boot/vmlinuz
113. append: earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 console=tty1 root=PARTUUID=f7e6c25f-01 rootfstype=ext4 rootwait fsck.repair=yes net.ifnames=0 systemd.unified_cgroup_hierarchy=0
114. Retrieving file: /boot/rk3566-soquartz-cm4.dtb
115. Moving Image from 0x2080000 to 0x2200000, end=45b0000
116. ## Flattened Device Tree blob at 0a100000
117.    Booting using the fdt blob at 0xa100000
118.    Loading Device Tree to 00000000ededa000, end 00000000edee9f09 ... OK
119.  
120. Starting kernel ...
121.  
122. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
123. [    0.000000] Linux version 6.1.0-rc1 (root@runner-7gzwldlw-project-27231216-concurrent-0) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 10.2.1 20201103, GNU ld (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 2.35.1.20201028) #1 SMP PREEMPT Wed Nov  9 01:08:14 UTC 2022
124. [    0.000000] Machine model: Pine64 RK3566 SoQuartz with CM4-IO Carrier Board
125. [    0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
126. [    0.000000] printk: bootconsole [uart8250] enabled
127. [    0.000000] efi: UEFI not found.
128. [    0.000000] NUMA: No NUMA configuration found
129. [    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000efffffff]
130. [    0.000000] NUMA: NODE_DATA [mem 0xef829a00-0xef82bfff]
131. [    0.000000] Zone ranges:
132. [    0.000000]   DMA      [mem 0x0000000000200000-0x00000000efffffff]
133. [    0.000000]   DMA32    empty
134. [    0.000000]   Normal   empty
135. [    0.000000] Movable zone start for each node
136. [    0.000000] Early memory node ranges
137. [    0.000000]   node   0: [mem 0x0000000000200000-0x00000000efffffff]
138. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
139. [    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
140. [    0.000000] cma: Reserved 32 MiB at 0x00000000e8200000
141. [    0.000000] psci: probing for conduit method from DT.
142. [    0.000000] psci: PSCIv1.1 detected in firmware.
143. [    0.000000] psci: Using standard PSCI v0.2 function IDs
144. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
145. [    0.000000] psci: SMC Calling Convention v1.2
146. [    0.000000] percpu: Embedded 28 pages/cpu s75688 r8192 d30808 u114688
147. [    0.000000] pcpu-alloc: s75688 r8192 d30808 u114688 alloc=28*4096
148. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
149. [    0.000000] Detected VIPT I-cache on CPU0
150. [    0.000000] CPU features: detected: GIC system register CPU interface
151. [    0.000000] CPU features: detected: Virtualization Host Extensions
152. [    0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
153. [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
154. [    0.000000] alternatives: applying boot alternatives
155. [    0.000000] Fallback order for Node 0: 0
156. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 967176
157. [    0.000000] Policy zone: DMA
158. [    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 console=tty1 root=PARTUUID=f7e6c25f-01 rootfstype=ext4 rootwait fsck.repair=yes net.ifnames=0 systemd.unified_cgroup_hierarchy=0
159. [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
160. [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
161. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
162. [    0.000000] Memory: 3784684K/3930112K available (19136K kernel code, 3158K rwdata, 6976K rodata, 6400K init, 702K bss, 112660K reserved, 32768K cma-reserved)
163. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
164. [    0.000000] ftrace: allocating 60326 entries in 236 pages
165. [    0.000000] ftrace: allocated 236 pages with 5 groups
166. [    0.000000] trace event string verifier disabled
167. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
168. [    0.000000] rcu:     RCU event tracing is enabled.
169. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
170. [    0.000000]  Trampoline variant of Tasks RCU enabled.
171. [    0.000000]  Rude variant of Tasks RCU enabled.
172. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
173. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
174. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
175. [    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
176. [    0.000000] GICv3: 320 SPIs implemented
177. [    0.000000] GICv3: 0 Extended SPIs implemented
178. [    0.000000] GICv3: MBI range [296:319]
179. [    0.000000] GICv3: Using MBI frame 0x00000000fd410000
180. [    0.000000] Root IRQ handler: gic_handle_irq
181. [    0.000000] GICv3: GICv3 features: 16 PPIs
182. [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
183. [    0.000000] ITS: No ITS available, not enabling LPIs
184. [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
185. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
186. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
187. [    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
188. [    0.001528] Console: colour dummy device 80x25
189. [    0.001987] printk: console [tty1] enabled
190. [    0.002465] printk: bootconsole [uart8250] disabled
191. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
192. [    0.000000] Linux version 6.1.0-rc1 (root@runner-7gzwldlw-project-27231216-concurrent-0) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 10.2.1 20201103, GNU ld (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) 2.35.1.20201028) #1 SMP PREEMPT Wed Nov  9 01:08:14 UTC 2022
193. [    0.000000] Machine model: Pine64 RK3566 SoQuartz with CM4-IO Carrier Board
194. [    0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
195. [    0.000000] printk: bootconsole [uart8250] enabled
196. [    0.000000] efi: UEFI not found.
197. [    0.000000] NUMA: No NUMA configuration found
198. [    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000efffffff]
199. [    0.000000] NUMA: NODE_DATA [mem 0xef829a00-0xef82bfff]
200. [    0.000000] Zone ranges:
201. [    0.000000]   DMA      [mem 0x0000000000200000-0x00000000efffffff]
202. [    0.000000]   DMA32    empty
203. [    0.000000]   Normal   empty
204. [    0.000000] Movable zone start for each node
205. [    0.000000] Early memory node ranges
206. [    0.000000]   node   0: [mem 0x0000000000200000-0x00000000efffffff]
207. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
208. [    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
209. [    0.000000] cma: Reserved 32 MiB at 0x00000000e8200000
210. [    0.000000] psci: probing for conduit method from DT.
211. [    0.000000] psci: PSCIv1.1 detected in firmware.
212. [    0.000000] psci: Using standard PSCI v0.2 function IDs
213. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
214. [    0.000000] psci: SMC Calling Convention v1.2
215. [    0.000000] percpu: Embedded 28 pages/cpu s75688 r8192 d30808 u114688
216. [    0.000000] pcpu-alloc: s75688 r8192 d30808 u114688 alloc=28*4096
217. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
218. [    0.000000] Detected VIPT I-cache on CPU0
219. [    0.000000] CPU features: detected: GIC system register CPU interface
220. [    0.000000] CPU features: detected: Virtualization Host Extensions
221. [    0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009
222. [    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
223. [    0.000000] alternatives: applying boot alternatives
224. [    0.000000] Fallback order for Node 0: 0
225. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 967176
226. [    0.000000] Policy zone: DMA
227. [    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xfe660000 console=ttyS2,1500000n8 console=tty1 root=PARTUUID=f7e6c25f-01 rootfstype=ext4 rootwait fsck.repair=yes net.ifnames=0 systemd.unified_cgroup_hierarchy=0
228. [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
229. [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
230. [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
231. [    0.000000] Memory: 3784684K/3930112K available (19136K kernel code, 3158K rwdata, 6976K rodata, 6400K init, 702K bss, 112660K reserved, 32768K cma-reserved)
232. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
233. [    0.000000] ftrace: allocating 60326 entries in 236 pages
234. [    0.000000] ftrace: allocated 236 pages with 5 groups
235. [    0.000000] trace event string verifier disabled
236. [    0.000000] rcu: Preemptible hierarchical RCU implementation.
237. [    0.000000] rcu:     RCU event tracing is enabled.
238. [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
239. [    0.000000]  Trampoline variant of Tasks RCU enabled.
240. [    0.000000]  Rude variant of Tasks RCU enabled.
241. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
242. [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
243. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
244. [    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
245. [    0.000000] GICv3: 320 SPIs implemented
246. [    0.000000] GICv3: 0 Extended SPIs implemented
247. [    0.000000] GICv3: MBI range [296:319]
248. [    0.000000] GICv3: Using MBI frame 0x00000000fd410000
249. [    0.000000] Root IRQ handler: gic_handle_irq
250. [    0.000000] GICv3: GICv3 features: 16 PPIs
251. [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
252. [    0.000000] ITS: No ITS available, not enabling LPIs
253. [    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
254. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
255. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
256. [    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
257. [    0.001528] Console: colour dummy device 80x25
258. [    0.001987] printk: console [tty1] enabled
259. [    0.002465] printk: bootconsole [uart8250] disabled
260. [    0.003065] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
261. [    0.003104] pid_max: default: 32768 minimum: 301
262. [    0.003217] LSM: Security Framework initializing
263. [    0.003391] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
264. [    0.003443] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
265. [    0.004899] cacheinfo: Unable to detect cache hierarchy for CPU 0
266. [    0.006157] cblist_init_generic: Setting adjustable number of callback queues.
267. [    0.006191] cblist_init_generic: Setting shift to 2 and lim to 1.
268. [    0.006365] cblist_init_generic: Setting shift to 2 and lim to 1.
269. [    0.006816] rcu: Hierarchical SRCU implementation.
270. [    0.006839] rcu:     Max phase no-delay instances is 1000.
271. [    0.007733] EFI services will not be available.
272. [    0.008449] smp: Bringing up secondary CPUs ...
273. [    0.009452] Detected VIPT I-cache on CPU1
274. [    0.009574] cacheinfo: Unable to detect cache hierarchy for CPU 1
275. [    0.009592] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
276. [    0.009655] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
277. [    0.010871] Detected VIPT I-cache on CPU2
278. [    0.010970] cacheinfo: Unable to detect cache hierarchy for CPU 2
279. [    0.010988] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
280. [    0.011035] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
281. [    0.012095] Detected VIPT I-cache on CPU3
282. [    0.012196] cacheinfo: Unable to detect cache hierarchy for CPU 3
283. [    0.012216] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
284. [    0.012261] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
285. [    0.012425] smp: Brought up 1 node, 4 CPUs
286. [    0.012592] SMP: Total of 4 processors activated.
287. [    0.012612] CPU features: detected: 32-bit EL0 Support
288. [    0.012630] CPU features: detected: 32-bit EL1 Support
289. [    0.012649] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
290. [    0.012672] CPU features: detected: Common not Private translations
291. [    0.012690] CPU features: detected: CRC32 instructions
292. [    0.012710] CPU features: detected: RCpc load-acquire (LDAPR)
293. [    0.012726] CPU features: detected: LSE atomic instructions
294. [    0.012744] CPU features: detected: Privileged Access Never
295. [    0.012760] CPU features: detected: RAS Extension Support
296. [    0.012781] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
297. [    0.012905] CPU: All CPU(s) started at EL2
298. [    0.012928] alternatives: applying system-wide alternatives
299. [    0.019542] devtmpfs: initialized
300. [    0.036790] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
301. [    0.036860] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
302. [    0.038205] pinctrl core: initialized pinctrl subsystem
303. [    0.038765] regulator-dummy: no parameters, enabled
304. [    0.039344] DMI not present or invalid.
305. [    0.040242] NET: Registered PF_NETLINK/PF_ROUTE protocol family
306. [    0.042137] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
307. [    0.042428] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
308. [    0.042818] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32
309.                                                              [    0.406165] brd: module loaded
310. [    0.415971] loop: module loaded
311. [    0.417115] zram: Added device: zram0
312. [    0.417763] megasas: 07.719.03.00-rc1
313. [    0.428306] tun: Universal TUN/TAP device driver, 1.6
314. [    0.429187] e100: Intel(R) PRO/100 Network Driver
315. [    0.429629] e100: Copyright(c) 1999-2006 Intel Corporation
316. [    0.430215] e1000: Intel(R) PRO/1000 Network Driver
317. [    0.430668] e1000: Copyright (c) 1999-2006 Intel Corporation.
318. [    0.431321] e1000e: Intel(R) PRO/1000 Network Driver
319. [    0.431781] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
320. [    0.432388] igb: Intel(R) Gigabit Ethernet Network Driver
321. [    0.432886] igb: Copyright (c) 2007-2014 Intel Corporation.
322. [    0.433457] Intel(R) 2.5G Ethernet Linux Driver
323. [    0.433876] Copyright(c) 2018 Intel Corporation.
324. [    0.434366] igbvf: Intel(R) Gigabit Virtual Function Network Driver
325. [    0.434961] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
326. [    0.435565] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
327. [    0.436122] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
328. [    0.437025] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver
329. [    0.437730] ixgbevf: Copyright (c) 2009 - 2018 Intel Corporation.
330. [    0.438535] i40e: Intel(R) Ethernet Connection XL710 Network Driver
331. [    0.439151] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
332. [    0.439968] ixgb: Intel(R) PRO/10GbE Network Driver
333. [    0.440422] ixgb: Copyright (c) 1999-2008 Intel Corporation.
334. [    0.441012] iavf: Intel(R) Ethernet Adaptive Virtual Function Network Driver
335. [    0.441653] Copyright (c) 2013 - 2018 Intel Corporation.
336. [    0.442406] Intel(R) Ethernet Switch Host Interface Driver
337. [    0.442947] Copyright(c) 2013 - 2019 Intel Corporation.
338. [    0.443716] ice: Intel(R) Ethernet Connection E800 Series Linux Driver
339. [    0.444315] ice: Copyright (c) 2018, Intel Corporation.
340. [    0.446781] usbcore: registered new interface driver rtl8192cu
341. [    0.447881] usbcore: registered new interface driver rtl8xxxu
342. [    0.448703] usbcore: registered new interface driver ax88179_178a
343. [    0.449629] VFIO - User Level meta-driver version: 0.3
344. [    0.457117] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
345. [    0.457671] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
346. [    0.458547] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports
347. [    0.459143] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000002002010010
348. [    0.460090] xhci-hcd xhci-hcd.0.auto: irq 33, io mem 0xfcc00000
349. [    0.462054] hub 1-0:1.0: USB hub found
350. [    0.462461] hub 1-0:1.0: 1 port detected
351. [    0.463601] usbcore: registered new interface driver usb-storage
352. [    0.465852] i2c_dev: i2c /dev entries driver
353. [    0.474710] rtc rtc0: Power loss detected, invalid time
354. [    0.475530] rtc-pcf85063 1-0051: registered as rtc0
355. [    0.477022] rtc rtc0: Power loss detected, invalid time
356. [    0.477509] rtc-pcf85063 1-0051: hctosys: unable to read the hardware clock
357. [    0.479326] arm-scmi firmware:scmi: Failed. SCMI protocol 21 not active.
358. [    0.481963] rockchip-thermal fe710000.tsadc: Missing tshut mode property, using default (gpio)
359. [    0.482788] rockchip-thermal fe710000.tsadc: Missing tshut-polarity property, using default (low)
360. [    0.486958] cpu cpu0: Looking up cpu-supply from device tree
361. [    0.487763] arm-scmi firmware:scmi: Failed. SCMI protocol 19 not active.
362. [    0.489853] sdhci: Secure Digital Host Controller Interface driver
363. [    0.490425] sdhci: Copyright(c) Pierre Ossman
364. [    0.491302] Synopsys Designware Multimedia Card Interface Driver
365. [    0.492386] sdhci-pltfm: SDHCI platform and OF driver helper
366. [    0.495502] ledtrig-cpu: registered to indicate activity on CPUs
367. [    0.496890] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
368. [    0.497601] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
369. [    0.498822] usbcore: registered new interface driver usbhid
370. [    0.499340] usbhid: USB HID core driver
371. [    0.500968] SPI driver st-accel-spi has no spi_device_id for st,lis302dl-spi
372. [    0.501616] SPI driver st-accel-spi has no spi_device_id for st,lis3lv02dl-accel
373. [    0.502286] SPI driver st-accel-spi has no spi_device_id for st,lis3dh-accel
374. [    0.502961] SPI driver st-accel-spi has no spi_device_id for st,lsm330d-accel
375. [    0.503609] SPI driver st-accel-spi has no spi_device_id for st,lsm330dl-accel
376. [    0.504262] SPI driver st-accel-spi has no spi_device_id for st,lsm330dlc-accel
377. [    0.504921] SPI driver st-accel-spi has no spi_device_id for st,lis331dlh-accel
378. [    0.505579] SPI driver st-accel-spi has no spi_device_id for st,lsm330-accel
379. [    0.506212] SPI driver st-accel-spi has no spi_device_id for st,lsm303agr-accel
380. [    0.506890] SPI driver st-accel-spi has no spi_device_id for st,lis2dh12-accel
381. [    0.507547] SPI driver st-accel-spi has no spi_device_id for st,lng2dm-accel
382. [    0.508183] SPI driver st-accel-spi has no spi_device_id for st,h3lis331dl-accel
383. [    0.508851] SPI driver st-accel-spi has no spi_device_id for st,lis331dl-accel
384. [    0.518221] NET: Registered PF_PACKET protocol family
385. [    0.518977] 9pnet: Installing 9P2000 support
386. [    0.519475] Key type dns_resolver registered
387. [    0.520617] registered taskstats version 1
388. [    0.521018] Loading compiled-in X.509 certificates
389. [    0.525697] zswap: loaded using pool zstd/zsmalloc
390. [    0.596074] reg-fixed-voltage vbus-regulator: Looking up vin-supply from device tree
391. [    0.596831] vbus: supplied by vcc_5v
392. [    0.597173] vcc_5v: could not add device link regulator.4: -ENOENT
393. [    0.597821] vbus: 5000 mV, enabled
394. [    0.598382] reg-fixed-voltage vbus-regulator: vbus supplying 5000000uV
395. [    0.599348] reg-fixed-voltage vcc5v0-sys-regulator: Looking up vin-supply from device tree
396. [    0.600114] vcc5v0_sys: supplied by vbus
397. [    0.600485] vbus: could not add device link regulator.5: -ENOENT
398. [    0.601128] vcc5v0_sys: 5000 mV, enabled
399. [    0.601699] reg-fixed-voltage vcc5v0-sys-regulator: vcc5v0_sys supplying 5000000uV
400. [    0.602676] reg-fixed-voltage vcc3v3-sys-regulator: Looking up vin-supply from device tree
401. [    0.603472] vcc3v3_sys: supplied by vcc5v0_sys
402. [    0.603893] vcc5v0_sys: could not add device link regulator.6: -ENOENT
403. [    0.604553] vcc3v3_sys: 3300 mV, enabled
404. [    0.605103] reg-fixed-voltage vcc3v3-sys-regulator: vcc3v3_sys supplying 3300000uV
405. [    0.607758] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected!
406. [    0.608425] fan53555-regulator 0-001c: Looking up vin-supply from device tree
407. [    0.609088] vdd_cpu: supplied by vcc5v0_sys
408. [    0.609513] vcc5v0_sys: could not add device link regulator.7: -ENOENT
409. [    0.613124] vdd_cpu: 800 <--> 1150 mV at 900 mV, enabled
410. [    0.616075] rk808 0-0020: chip id: 0x8090
411. [    0.662588] rk808-regulator rk808-regulator: there is no dvs0 gpio
412. [    0.663252] rk808-regulator rk808-regulator: there is no dvs1 gpio
413. [    0.663954] rk808 0-0020: Looking up vcc1-supply from device tree
414. [    0.664661] vdd_logic: supplied by vcc3v3_sys
415. [    0.665075] vcc3v3_sys: could not add device link regulator.8: -ENOENT
416. [    0.670055] vdd_logic: 500 <--> 1350 mV at 900 mV, enabled
417. [    0.671419] rk808 0-0020: Looking up vcc2-supply from device tree
418. [    0.671995] vdd_gpu: supplied by vcc3v3_sys
419. [    0.672391] vcc3v3_sys: could not add device link regulator.9: -ENOENT
420. [    0.676810] vdd_gpu: 500 <--> 1350 mV at 900 mV, enabled
421. [    0.678114] rk808 0-0020: Looking up vcc3-supply from device tree
422. [    0.678690] vcc_ddr: supplied by vcc3v3_sys
423. [    0.679120] vcc3v3_sys: could not add device link regulator.10: -ENOENT
424. [    0.682574] vcc_ddr: at 500 mV, enabled
425. [    0.683800] rk808 0-0020: Looking up vcc4-supply from device tree
426. [    0.684375] vdd_npu: supplied by vcc3v3_sys
427. [    0.684770] vcc3v3_sys: could not add device link regulator.11: -ENOENT
428. [    0.688711] vdd_npu: 500 <--> 1350 mV at 900 mV, enabled
429. [    0.690020] rk808 0-0020: Looking up vcc9-supply from device tree
430. [    0.690595] vcc_1v8: supplied by vcc3v3_sys
431. [    0.691023] vcc3v3_sys: could not add device link regulator.12: -ENOENT
432. [    0.694493] vcc_1v8: 1800 mV, enabled
433. [    0.695668] rk808 0-0020: Looking up vcc5-supply from device tree
434. [    0.696243] vdda0v9_image: supplied by vcc3v3_sys
435. [    0.696682] vcc3v3_sys: could not add device link regulator.13: -ENOENT
436. [    0.700670] vdda0v9_image: 900 mV, enabled
437. [    0.701878] rk808 0-0020: Looking up vcc5-supply from device tree
438. [    0.702453] vdda_0v9: supplied by vcc3v3_sys
439. [    0.702888] vcc3v3_sys: could not add device link regulator.14: -ENOENT
440. [    0.706401] vdda_0v9: 900 mV, enabled
441. [    0.707585] rk808 0-0020: Looking up vcc5-supply from device tree
442. [    0.708160] vdda0v9_pmu: supplied by vcc3v3_sys
443. [    0.708586] vcc3v3_sys: could not add device link regulator.15: -ENOENT
444. [    0.712577] vdda0v9_pmu: 900 mV, enabled
445. [    0.713759] rk808 0-0020: Looking up vcc6-supply from device tree
446. [    0.714333] vccio_acodec: supplied by vcc3v3_sys
447. [    0.714802] vcc3v3_sys: could not add device link regulator.16: -ENOENT
448. [    0.718302] vccio_acodec: 3300 mV, enabled
449. [    0.718798] usb 1-1: new high-speed USB device number 2 using xhci-hcd
450. [    0.719548] rk808 0-0020: Looking up vcc6-supply from device tree
451. [    0.720126] vccio_sd: supplied by vcc3v3_sys
452. [    0.720526] vcc3v3_sys: could not add device link regulator.17: -ENOENT
453. [    0.724515] vccio_sd: 1800 <--> 3300 mV at 3300 mV, enabled
454. [    0.725844] rk808 0-0020: Looking up vcc6-supply from device tree
455. [    0.726420] vcc3v3_pmu: supplied by vcc3v3_sys
456. [    0.726869] vcc3v3_sys: could not add device link regulator.18: -ENOENT
457. [    0.730853] vcc3v3_pmu: 3300 mV, enabled
458. [    0.732040] rk808 0-0020: Looking up vcc7-supply from device tree
459. [    0.732616] vcca_1v8: supplied by vcc3v3_sys
460. [    0.733014] vcc3v3_sys: could not add device link regulator.19: -ENOENT
461. [    0.736541] vcca_1v8: 1800 mV, enabled
462. [    0.737724] rk808 0-0020: Looking up vcc7-supply from device tree
463. [    0.738301] vcca1v8_pmu: supplied by vcc3v3_sys
464. [    0.738726] vcc3v3_sys: could not add device link regulator.20: -ENOENT
465. [    0.742263] vcca1v8_pmu: 1800 mV, enabled
466. [    0.743463] rk808 0-0020: Looking up vcc7-supply from device tree
467. [    0.744038] vcca1v8_image: supplied by vcc3v3_sys
468. [    0.744478] vcc3v3_sys: could not add device link regulator.21: -ENOENT
469. [    0.747989] vcca1v8_image: 1800 mV, enabled
470. [    0.750167] vcc_3v3: no parameters, enabled
471. [    0.750822] rk808 0-0020: Looking up vcc9-supply from device tree
472. [    0.751398] vcc_3v3: supplied by vcc3v3_sys
473. [    0.752397] SWITCH_REG2: no parameters, enabled
474. [    0.752999] rk808 0-0020: Looking up vcc8-supply from device tree
475. [    0.753573] SWITCH_REG2: supplied by vcc3v3_sys
476. [    0.760574] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
477. [    0.774049] rk808-rtc rk808-rtc: registered as rtc1
478. [    0.775704] cpu cpu0: Looking up cpu-supply from device tree
479. [    0.783144] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply from device tree
480. [    0.783465] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode.
481. [    0.783932] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
482. [    0.783955] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
483. [    0.783962] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
484. [    0.784013] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 64,32 bit host data width,256 deep fifo
485. [    0.784608] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller.
486. [    0.784693] dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply from device tree
487. [    0.785236] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a
488. [    0.785274] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 63,32 bit host data width,256 deep fifo
489. [    0.786412] dwmmc_rockchip fe2c0000.mmc: Looking up vqmmc-supply from device tree
490. [    0.786550] sdhci-dwcmshc fe310000.mmc: Looking up vmmc-supply from device tree
491. [    0.786657] sdhci-dwcmshc fe310000.mmc: Looking up vqmmc-supply from device tree
492. [    0.787313] dwmmc_rockchip fe2b0000.mmc: Looking up vmmc-supply from device tree
493. [    0.787856] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio2-supply from device tree
494. [    0.788518] dwmmc_rockchip fe2b0000.mmc: Looking up vqmmc-supply from device tree
495. [    0.789150] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq
496. [    0.792463] sdhci-dwcmshc fe310000.mmc: Disabling HS200/HS400, frequency too low (50000000)
497. [    0.793239] mmc_host mmc2: card is non-removable.
498. [    0.794027] mmc_host mmc0: card is polling.
499. [    0.797193] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio1-supply from device tree
500. [    0.800006] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply from device tree
501. [    0.801850] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio3-supply from device tree
502. [    0.803679] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio4-supply from device tree
503. [    0.805456] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio5-supply from device tree
504. [    0.806307] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio6-supply from device tree
505. [    0.807181] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio7-supply from device tree
506. [    0.808940] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
507. [    0.809639] rk_gmac-dwmac fe010000.ethernet: Looking up phy-supply from device tree
508. [    0.810420] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
509. [    0.811136] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
510. [    0.811555] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
511. [    0.812006] rk_gmac-dwmac fe010000.ethernet: TX delay(0x30).
512. [    0.813264] rk_gmac-dwmac fe010000.ethernet: RX delay(0x10).
513. [    0.813773] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
514. [    0.814357] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
515. [    0.819931] rk_gmac-dwmac fe010000.ethernet: init for RGMII
516. [    0.820652] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
517. [    0.821292] rk_gmac-dwmac fe010000.ethernet:         DWMAC4/5
518. [    0.821753] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
519. [    0.822415] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
520. [    0.823258] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
521. [    0.823885] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
522. [    0.824529] rk_gmac-dwmac fe010000.ethernet: TSO supported
523. [    0.824724] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA
524. [    0.825018] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
525. [    0.826452] rk_gmac-dwmac fe010000.ethernet: device MAC address a6:b5:c8:f2:cc:06
526. [    0.827
527.           [    0.855511] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0)
528. [    0.909288] hub 1-1:1.0: USB hub found
529. [    0.909934] hub 1-1:1.0: 4 ports detected
530. [    0.937892] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
531. [    0.938935] mmc1: new high speed MMC card at address 0001
532. [    0.940022] mmcblk1: mmc1:0001 58A431 14.6 GiB
533. [    0.965271] cfg80211: Loading compiled-in X.509 certificates for regulatory database
534. [    0.967536] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
535. [    0.968222] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
536. [    0.968989] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
537. [    0.969751]  mmcblk1: p1
538. [    0.970479] mmcblk1boot0: mmc1:0001 58A431 4.00 MiB
539. [    0.972372] mmcblk1boot1: mmc1:0001 58A431 4.00 MiB
540. [    0.974046] mmcblk1rpmb: mmc1:0001 58A431 4.00 MiB, chardev (236:0)
541. [    1.033792] ALSA device list:
542. [    1.034090]   No soundcards found.
543. [    1.039684] EXT4-fs (mmcblk1p1): INFO: recovery required on readonly filesystem
544. [    1.040350] EXT4-fs (mmcblk1p1): write access will be enabled during recovery
545. [    1.049736] EXT4-fs (mmcblk1p1): recovery complete
546. [    1.050697] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none.
547. [    1.051565] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
548. [    1.056445] devtmpfs: mounted
549. [    1.062082] Freeing unused kernel memory: 6400K
550. [    1.062703] Run /sbin/init as init process
551. [    1.063118]   with arguments:
552. [    1.063390]     /sbin/init
553. [    1.063637]   with environment:
554. [    1.063921]     HOME=/
555. [    1.064138]     TERM=linux
556. [    1.198862] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
557. [    1.219092] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 233
558. [    1.224885] mmc2: new ultra high speed SDR104 SDIO card at address 0001
559. [    1.378509] systemd[1]: System time before build time, advancing clock.
560. [    1.424755] input: Logitech USB Receiver as /devices/platform/fcc00000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52B.0001/input/input1
561. [    1.472607] NET: Registered PF_INET6 protocol family
562. [    1.475003] Segment Routing with IPv6
563. [    1.475420] In-situ OAM (IOAM) with IPv6
564. [    1.483673] hid-generic 0003:046D:C52B.0001: input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input0
565. [    1.488016] input: Logitech USB Receiver Mouse as /devices/platform/fcc00000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input2
566. [    1.489594] input: Logitech USB Receiver Consumer Control as /devices/platform/fcc00000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input3
567. [    1.499088] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
568. [    1.501886] systemd[1]: Detected architecture arm64.
569. [    1.551442] input: Logitech USB Receiver System Control as /devices/platform/fcc00000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52B.0002/input/input4
570. [    1.553136] hid-generic 0003:046D:C52B.0002: input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-xhci-hcd.0.auto-1.1/input1
571. [    1.557717] hid-generic 0003:046D:C52B.0003: device has no listeners, quitting
572. [    1.567412] systemd[1]: Set hostname to <DietPi>.
573. [    1.716735] dw-apb-uart fe660000.serial: forbid DMA for kernel console
574. [    2.057885] systemd[1]: Queued start job for default target Graphical Interface.
575. [    6.954759] random: crng init done
576. [    6.955324] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
577. [    6.956426] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
578. [    7.005007] systemd[1]: Created slice system-getty.slice.
579. [    7.007269] systemd[1]: Created slice system-modprobe.slice.
580. [    7.009222] systemd[1]: Created slice system-serial\x2dgetty.slice.
581. [    7.010253] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
582. [    7.011488] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
583. [    7.012397] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
584. [    7.013529] systemd[1]: Reached target Local Encrypted Volumes.
585. [    7.014324] systemd[1]: Reached target Paths.
586. [    7.014899] systemd[1]: Reached target Remote File Systems.
587. [    7.015538] systemd[1]: Reached target Slices.
588. [    7.016092] systemd[1]: Reached target Swap.
589. [    7.017058] systemd[1]: Listening on fsck to fsckd communication Socket.
590. [    7.018014] systemd[1]: Listening on initctl Compatibility Named Pipe.
591. [    7.019333] systemd[1]: Listening on Journal Audit Socket.
592. [    7.020384] systemd[1]: Listening on Journal Socket (/dev/log).
593. [    7.021470] systemd[1]: Listening on Journal Socket.
594. [    7.024654] systemd[1]: Listening on udev Control Socket.
595. [    7.025765] systemd[1]: Listening on udev Kernel Socket.
596. [    7.026445] systemd[1]: Reached target Sockets.
597. [    7.030429] systemd[1]: Mounting Huge Pages File System...
598. [    7.035077] systemd[1]: Mounting POSIX Message Queue File System...
599. [    7.040551] systemd[1]: Mounting Kernel Debug File System...
600. [    7.045391] systemd[1]: Mounting Kernel Trace File System...
601. [    7.053500] systemd[1]: Starting Restore / save the current clock...
602. [    7.058681] systemd[1]: Starting Set the console keyboard layout...
603. [    7.064037] systemd[1]: Starting Create list of static device nodes for the current kernel...
604. [    7.069627] systemd[1]: Starting Load Kernel Module configfs...
605. [    7.075556] systemd[1]: Starting Load Kernel Module fuse...
606. [    7.083093] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
607. [    7.088324] systemd[1]: Starting File System Check on Root Device...
608. [    7.095013] systemd[1]: Starting Journal Service...
609. [    7.104501] fuse: init (API version 7.37)
610. [    7.107472] systemd[1]: Starting Load Kernel Modules...
611. [    7.112765] systemd[1]: Starting Coldplug All udev Devices...
612. [    7.128983] systemd[1]: Mounted Huge Pages File System.
613. [    7.130252] systemd[1]: Mounted POSIX Message Queue File System.
614. [    7.131856] systemd[1]: Mounted Kernel Debug File System.
615. [    7.133176] systemd[1]: Mounted Kernel Trace File System.
616. [    7.136629] systemd[1]: Finished Restore / save the current clock.
617. [    7.140324] systemd[1]: Finished Create list of static device nodes for the current kernel.
618. [    7.142480] systemd[1]: [email protected]: Succeeded.
619. [    7.145549] systemd[1]: Finished Load Kernel Module configfs.
620. [    7.147794] systemd[1]: [email protected]: Succeeded.
621. [    7.150416] systemd[1]: Finished Load Kernel Module fuse.
622. [    7.156191] systemd[1]: Finished Load Kernel Modules.
623. [    7.162366] systemd[1]: Mounting FUSE Control File System...
624. [    7.169406] systemd[1]: Mounting Kernel Configuration File System...
625. [    7.174977] systemd[1]: Started File System Check Daemon to report status.
626. [    7.180699] systemd[1]: Starting Apply Kernel Variables...
627. [    7.186601] systemd[1]: Mounted FUSE Control File System.
628. [    7.203158] systemd[1]: Mounted Kernel Configuration File System.
629. [    8.172283] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
630. [    8.547472] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Sep 18 2020 02:27:58 version 7.45.221 (3a6d3a0 CY) FWID 01-bbd9282b
631.  
632.