Facebook

Untitled safest cryptocurrency exchange

From Cobalt Curlew, 3 Years ago, written in Plain Text.
URL https://pastebin.pl/view/ce63d072
Embed
Download Paste or View Raw
Hits: 104
  1. [  667.769321] reboot: Restarting system
  2. INFO:    PSCI Power Domain Map:
  3. INFO:      Domain Node : Level 2, parent_node -1, State ON (0x0)
  4. INFO:      Domain Node : Level 1, parent_node 0, State ON (0x0)
  5. INFO:      Domain Node : Level 0, parent_node 0, State ON (0x0)
  6. INFO:      Domain Node : Level 0, parent_node 0, State ON (0x0)
  7. INFO:      CPU Node : MPID 0x0, parent_node 1, State ON (0x0)
  8. INFO:      CPU Node : MPID 0x1, parent_node 1, State ON (0x0)
  9. INFO:      CPU Node : MPID 0x2, parent_node 1, State ON (0x0)
  10. INFO:      CPU Node : MPID 0x3, parent_node 1, State ON (0x0)
  11.  
  12. DDR Version V1.26
  13. REGFB: 0x00000032, 0x00000032
  14. In
  15. 589MHz
  16. DDR3
  17.  Col=10 Bank=8 Row=15 Size=512MB
  18. msch:1
  19. Returning to boot ROM...
  20. Boot1 Release Time: Jul 17 2019 17:31:26, version: 1.14
  21. chip_id:330800,0
  22. ChipType = 0x13, 35790979
  23. DPLL = 1300 MHz
  24. sfc_ver 3
  25. sfc nor id: ff ff ff
  26. sfc_nand_init
  27. DPLL = 1300 MHz
  28. sfc_ver 3
  29. sfc_nand id: ff ff ff
  30. DPLL = 1300 MHz
  31. NeedKHz=200KHz,clock=12000KHz
  32. NeedKHz=200KHz,clock=12000KHz
  33. NeedKHz=200KHz,clock=12000KHz
  34. mmc2:cmd5,20
  35. DPLL = 1300 MHz
  36. NeedKHz=24000KHz,clock=650000KHz
  37. DPLL = 1300 MHz
  38. NeedKHz=40000KHz,clock=650000KHz
  39. SdmmcInit=2 0
  40. BootCapSize=0
  41. UserCapSize=964MB
  42. FwPartOffset=2000 , 0
  43. NeedKHz=200KHz,clock=12000KHz
  44. NeedKHz=200KHz,clock=12000KHz
  45. NeedKHz=200KHz,clock=12000KHz
  46. mmc0:cmd5,20
  47. DPLL = 1300 MHz
  48. NeedKHz=24000KHz,clock=650000KHz
  49. DPLL = 1300 MHz
  50. NeedKHz=40000KHz,clock=650000KHz
  51. SdmmcInit=0 0
  52. BootCapSize=0
  53. UserCapSize=14768MB
  54. FwPartOffset=2000 , 0
  55. StorageInit ok = 35742776
  56. SecureMode = 0
  57. Secure read PBA: 0x4
  58. Secure read PBA: 0x404
  59. Secure read PBA: 0x804
  60. Secure read PBA: 0xc04
  61. Secure read PBA: 0x1004
  62. SecureInit ret = 0, SecureMode = 0
  63. atags_set_bootdev: ret:(0)
  64. GPT part:  0, name:             boot, start:0x8000, size:0x38000
  65. GPT part:  1, name:           rootfs, start:0x40000, size:0x1c97fdf
  66. no find partition:uboot.
  67. LoadTrust Addr:0x4000
  68. No find bl30.bin
  69. No find bl32.bin
  70. Load uboot, ReadLba = 2000
  71. Load OK, addr=0x600000, size=0x9a498
  72. RunBL31 0x10000
  73. INFO:    Preloader serial: 0
  74. NOTICE:  BL31: v1.3(release):3a579d3
  75. NOTICE:  BL31: Built : 09:09:17, Jan 29 2019
  76. INFO:    Lastlog: last=0x100000, realtime=0x102000, size=0x2000
  77. INFO:    ARM GICv2 driver initialized
  78. INFO:    Using opteed sec cpu_context!
  79. INFO:    boot cpu mask: 1
  80. INFO:    plat_rockchip_pmu_init: pd status 0xe b
  81. INFO:    BL31: Initializing runtime services
  82. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UK
  83. ERROR:   Error initializing runtime service opteed_fast
  84. INFO:    BL31: Preparing for EL3 exit to normal world
  85. INFO:    Entry point address = 0x600000
  86. INFO:    SPSR = 0x3c9
  87.  
  88.  
  89. U-Boot 2017.09 (Sep 20 2020 - 12:35:35 +0000)
  90.  
  91. Model: Radxa ROCK Pi S
  92. PreSerial: 0
  93. DRAM:  510 MiB
  94. Relocation Offset is: 1f91c000
  95. vdd_core 1044000 uV
  96. vdd-core init 1044000 uV
  97. MMC:   dwmmc@ff480000: 0, dwmmc@ff490000: 1
  98. Using default environment
  99.  
  100. In:    serial@ff0c0000
  101. Out:   serial@ff0c0000
  102. Err:   serial@ff0c0000
  103. Model: Radxa ROCK Pi S
  104. Bootdev(atags): mmc 0
  105. PartType: EFI
  106. ## Error: Can't overwrite "serial#"
  107. ## Error inserting "serial#" variable, errno=1
  108. get part misc fail -1
  109. boot mode: normal
  110. CLK:
  111. apll 816000 KHz
  112. dpll 1300000 KHz
  113. vpll0 1179647 KHz
  114. vpll1 903167 KHz
  115. aclk_bus 185714 KHz
  116. hclk_bus 100000 KHz
  117. pclk_bus 100000 KHz
  118. aclk_peri 185714 KHz
  119. hclk_peri 100000 KHz
  120. pclk_peri 100000 KHz
  121. hclk_audio 98303 KHz
  122. pclk_audio 98303 KHz
  123. Net:   Net Initialization Skipped
  124. No ethernet found.
  125. Hit key to stop autoboot('CTRL+C'):  0
  126. starting USB...
  127. USB0:   Core Release: 3.10a
  128. USB1:   USB EHCI 1.00
  129. scanning bus 0 for devices... 1 USB Device(s) found
  130. scanning bus 1 for devices... 1 USB Device(s) found
  131.        scanning usb for storage devices... 0 Storage Device(s) found
  132.  
  133. Device 0: unknown device
  134. switch to partitions #0, OK
  135. mmc0 is current device
  136. Scanning mmc 0:1...
  137. Found U-Boot script /boot.scr
  138. reading /boot.scr
  139. 2300 bytes read in 3 ms (748 KiB/s)
  140. ## Executing script at 00500000
  141. Boot script loaded from mmc 0
  142. reading /uEnv.txt
  143. 149 bytes read in 2 ms (72.3 KiB/s)
  144. reading /Image
  145. 11974664 bytes read in 509 ms (22.4 MiB/s)
  146. reading /rk3308-rock-pi-s.dtb
  147. 63554 bytes read in 5 ms (12.1 MiB/s)
  148. reading /overlays/rk3308-uart0.dtbo
  149. 382 bytes read in 3 ms (124 KiB/s)
  150. Applying kernel provided DT overlay rk3308-uart0.dtbo
  151. reading /overlays/rockchip-fixup.scr
  152. 1814 bytes read in 3 ms (589.8 KiB/s)
  153. Applying kernel provided DT fixup script (rockchip-fixup.scr)
  154. ## Executing script at 05000000
  155. ## Flattened Device Tree blob at 01f00000
  156.    Booting using the fdt blob at 0x1f00000
  157.    reserving fdt memory region: addr=1f00000 size=75000
  158.    Loading Device Tree to 000000001f493000, end 000000001f50afff ... OK
  159. Adding bank: 0x00200000 - 0x20000000 (size: 0x1fe00000)
  160.  
  161. Starting kernel ...
  162.  
  163.  
  164. WARNING: suspend_mode_handler: Not support call: 0x4
  165. [    0.000000] Booting Linux on physical CPU 0x0
  166. [    0.000000] Initializing cgroup subsys cpuset
  167. [    0.000000] Initializing cgroup subsys cpu
  168. [    0.000000] Initializing cgroup subsys cpuacct
  169. [    0.000000] Linux version 4.4.143 (oe-user@oe-host) (gcc version 9.2.0 (GCC) ) #1 SMP PREEMPT Sun Sep 20 10:07:12 UTC 2020
  170. [    0.000000] Boot CPU: AArch64 Processor [410fd042]
  171. [    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
  172. [    0.000000] psci: probing for conduit method from DT.
  173. [    0.000000] psci: PSCIv1.0 detected in firmware.
  174. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  175. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  176. [    0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc01ff56000 s40344 r8192 d29288 u77824
  177. [    0.000000] Detected VIPT I-cache on CPU0
  178. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128520
  179. [    0.000000] Kernel command line: console=tty1 console=ttyS0,1500000n8 rw root=PARTUUID=b921b045-1df0-41c3-af44-4c6f280d3fae rootfstt
  180. [    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
  181. [    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
  182. [    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
  183. [    0.000000] software IO TLB [mem 0x1a493000-0x1e493000] (64MB) mapped at [ffffffc01a493000-ffffffc01e492fff]
  184. [    0.000000] Memory: 433868K/522240K available (6846K kernel code, 558K rwdata, 3864K rodata, 384K init, 521K bss, 88372K reserved, )
  185. [    0.000000] Virtual kernel memory layout:
  186. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  187. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
  188. [    0.000000]       .init : 0xffffff8008b00000 - 0xffffff8008b60000   (   384 KB)
  189. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008730000   (  6848 KB)
  190. [    0.000000]     .rodata : 0xffffff8008730000 - 0xffffff8008b00000   (  3904 KB)
  191. [    0.000000]       .data : 0xffffff8008b60000 - 0xffffff8008beb808   (   559 KB)
  192. [    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
  193. [    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
  194. [    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc020000000   (   510 MB)
  195. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  196. [    0.000000] Preemptible hierarchical RCU implementation.
  197. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  198. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  199. [    0.000000] GIC: Using split EOI/Deactivate mode
  200. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  201. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  202. [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  203. [    0.001058] Console: colour dummy device 80x25
  204. [    0.002499] console [tty1] enabled
  205. [    0.002551] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  206. [    0.002631] pid_max: default: 32768 minimum: 301
  207. [    0.002751] Security Framework initialized
  208. [    0.002799] AppArmor: AppArmor disabled by boot time parameter
  209. [    0.002899] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
  210. [    0.002946] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
  211. [    0.003782] Initializing cgroup subsys io
  212. [    0.003843] Initializing cgroup subsys memory
  213. [    0.003908] Initializing cgroup subsys devices
  214. [    0.003956] Initializing cgroup subsys freezer
  215. [    0.004001] Initializing cgroup subsys net_cls
  216. [    0.004047] Initializing cgroup subsys perf_event
  217. [    0.004094] Initializing cgroup subsys net_prio
  218. [    0.004147] Initializing cgroup subsys hugetlb
  219. [    0.004191] Initializing cgroup subsys pids
  220. [    0.004560] sched-energy: CPU device node has no sched-energy-costs
  221. [    0.004610] Invalid sched_group_energy for CPU0
  222. [    0.004649] CPU0: update cpu_capacity 1024
  223. [    0.004731] ASID allocator initialised with 65536 entries
  224. [    0.039876] Detected VIPT I-cache on CPU1
  225. [    0.039936] Invalid sched_group_energy for CPU1
  226. [    0.039941] CPU1: update cpu_capacity 1024
  227. [    0.039946] CPU1: Booted secondary processor [410fd042]
  228. [    0.051899] Detected VIPT I-cache on CPU2
  229. [    0.051940] Invalid sched_group_energy for CPU2
  230. [    0.051944] CPU2: update cpu_capacity 1024
  231. [    0.051948] CPU2: Booted secondary processor [410fd042]
  232. [    0.063942] Detected VIPT I-cache on CPU3
  233. [    0.063978] Invalid sched_group_energy for CPU3
  234. [    0.063982] CPU3: update cpu_capacity 1024
  235. [    0.063986] CPU3: Booted secondary processor [410fd042]
  236. [    0.064069] Brought up 4 CPUs
  237. [    0.064517] SMP: Total of 4 processors activated.
  238. [    0.064563] CPU: All CPU(s) started at EL2
  239. [    0.064748] Invalid sched_group_energy for CPU3
  240. [    0.064794] Invalid sched_group_energy for Cluster3
  241. [    0.064832] Invalid sched_group_energy for CPU2
  242. [    0.064869] Invalid sched_group_energy for Cluster2
  243. [    0.064908] Invalid sched_group_energy for CPU1
  244. [    0.064945] Invalid sched_group_energy for Cluster1
  245. [    0.064984] Invalid sched_group_energy for CPU0
  246. [    0.065021] Invalid sched_group_energy for Cluster0
  247. [    0.065700] devtmpfs: initialized
  248. [    0.083750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  249. [    0.083856] futex hash table entries: 1024 (order: 4, 65536 bytes)
  250. [    0.084447] pinctrl core: initialized pinctrl subsystem
  251. [    0.085728] NET: Registered protocol family 16
  252. [    0.096097] cpuidle: using governor menu
  253. [    0.096184] Registered FIQ tty driver
  254. [    0.096517] vdso: 2 pages (1 code @ ffffff8008736000, 1 data @ ffffff8008b64000)
  255. [    0.096614] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  256. [    0.096889] DMA: preallocated 256 KiB pool for atomic allocations
  257. [    0.100129] console [pstore-1] enabled
  258. [    0.100173] pstore: Registered ramoops as persistent store backend
  259. [    0.100220] ramoops: attached 0xf0000@0x110000, ecc: 0/0
  260. [    0.139809] vcc_1v8: regulator get failed, ret=-517
  261. [    0.140728] vcc_1v8_codec: regulator get failed, ret=-517
  262. [    0.141582] vcc_1v8: supplied by vcc_io
  263. [    0.141700] vcc_1v8_codec: supplied by vcc_io
  264. [    0.143990] SCSI subsystem initialized
  265. [    0.144682] usbcore: registered new interface driver usbfs
  266. [    0.144794] usbcore: registered new interface driver hub
  267. [    0.144943] usbcore: registered new device driver usb
  268. [    0.145139] media: Linux media interface: v0.10
  269. [    0.145229] Linux video capture interface: v2.00
  270. [    0.145390] pps_core: LinuxPPS API ver. 1 registered
  271. [    0.145432] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  272. [    0.145527] PTP clock support registered
  273. [    0.146804] Advanced Linux Sound Architecture Driver Initialized.
  274. [    0.147620] Bluetooth: Core ver 2.21
  275. [    0.147708] NET: Registered protocol family 31
  276. [    0.147751] Bluetooth: HCI device and connection manager initialized
  277. [    0.147805] Bluetooth: HCI socket layer initialized
  278. [    0.147853] Bluetooth: L2CAP socket layer initialized
  279. [    0.147921] Bluetooth: SCO socket layer initialized
  280. [    0.148599] NetLabel: Initializing
  281. [    0.148647] NetLabel:  domain hash size = 128
  282. [    0.148686] NetLabel:  protocols = UNLABELED CIPSOv4
  283. [    0.148800] NetLabel:  unlabeled traffic allowed by default
  284. [    0.149428] rockchip-cpuinfo cpuinfo: Serial         : 880b55f3e85ace4e
  285. [    0.150051] clocksource: Switched to clocksource arch_sys_counter
  286. [    0.162781] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  287. [    0.162875] missing polling-delay-passive property
  288. [    0.162916] failed to build thermal zone soc_thermal: -22
  289. [    0.163289] NET: Registered protocol family 2
  290. [    0.164085] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  291. [    0.164191] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
  292. [    0.164313] TCP: Hash tables configured (established 4096 bind 4096)
  293. [    0.164446] UDP hash table entries: 256 (order: 1, 8192 bytes)
  294. [    0.164509] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  295. [    0.164804] NET: Registered protocol family 1
  296. [    0.165998] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  297. [    0.170204] audit: initializing netlink subsys (disabled)
  298. [    0.170344] audit: type=2000 audit(0.168:1): initialized
  299. [    0.171197] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  300. [    0.180826] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  301. [    0.181700] fuse init (API version 7.23)
  302. [    0.186696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  303. [    0.186965] io scheduler noop registered
  304. [    0.187019] io scheduler deadline registered (default)
  305. [    0.187252] io scheduler cfq registered
  306. [    0.192827] dma-pl330 ff2c0000.dma-controller: Loaded driver for PL330 DMAC-241330
  307. [    0.192926] dma-pl330 ff2c0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  308. [    0.195400] dma-pl330 ff2d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  309. [    0.195492] dma-pl330 ff2d0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  310. [    0.195913] rockchip-pvtm ff000000.grf:pmu-pvtm: failed to get rst 0 pmu
  311. [    0.196093] rockchip-pvtm ff00c000.syscon:pvtm: failed to get rst 0 core
  312. [    0.197689] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  313. [    0.200120] console [ttyS0] disabled
  314. [    0.200240] ff0a0000.serial: ttyS0 at MMIO 0xff0a0000 (irq = 11, base_baud = 1500000) is a 16550A
  315. [    0.275331] console [ttyS0] enabled
  316. [    0.276831] ff0e0000.serial: ttyS4 at MMIO 0xff0e0000 (irq = 12, base_baud = 5078125) is a 16550A
  317. [    0.278749] [drm] Initialized drm 1.1.0 20060810
  318. [    0.281751] Unable to detect cache hierarchy for CPU 0
  319. [    0.283506] brd: module loaded
  320. [    0.291269] loop: module loaded
  321. [    0.292062] SCSI Media Changer driver v0.25
  322. [    0.294856] rk_gmac-dwmac ff4e0000.ethernet: clock input or output? (output).
  323. [    0.295552] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: tx_delay.
  324. [    0.296223] rk_gmac-dwmac ff4e0000.ethernet: set tx_delay to 0x30
  325. [    0.296799] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: rx_delay.
  326. [    0.297467] rk_gmac-dwmac ff4e0000.ethernet: set rx_delay to 0x10
  327. [    0.298094] rk_gmac-dwmac ff4e0000.ethernet: integrated PHY? (no).
  328. [    0.303936] rk_gmac-dwmac ff4e0000.ethernet: init for RMII
  329. [    0.304586] stmmac - user ID: 0x10, Synopsys ID: 0x35
  330. [    0.305070]  Ring mode enabled
  331. [    0.305372]  DMA HW capability register supported
  332. [    0.305783]  Normal descriptors
  333. [    0.306156]  RX Checksum Offload Engine supported (type 2)
  334. [    0.306673]  TX Checksum insertion supported
  335. [    0.307081]  Wake-Up On Lan supported
  336. [    0.307500]  Enable RX Mitigation via HW Watchdog Timer
  337. [    0.418669] brian phy in rtl8201f_probe
  338. [    0.419759] brian phy in rtl8201f_probe
  339. [    0.422904] libphy: stmmac: probed
  340. [    0.423246] eth%d: PHY ID 001cc816 at 0 IRQ POLL (stmmac-0:00) active
  341. [    0.423853] eth%d: PHY ID 001cc816 at 1 IRQ POLL (stmmac-0:01)
  342. [    0.425564] Rockchip WiFi SYS interface (V1.00) ...
  343. [    0.426515] ff400000.usb supply vusb_d not found, using dummy regulator
  344. [    0.427214] ff400000.usb supply vusb_a not found, using dummy regulator
  345. [    0.658114] dwc2 ff400000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
  346. [    0.659361] dwc2 ff400000.usb: DWC OTG Controller
  347. [    0.659850] dwc2 ff400000.usb: new USB bus registered, assigned bus number 1
  348. [    0.660547] dwc2 ff400000.usb: irq 20, io mem 0xff400000
  349. [    0.661250] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  350. [    0.661894] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  351. [    0.662632] usb usb1: Product: DWC OTG Controller
  352. [    0.663088] usb usb1: Manufacturer: Linux 4.4.143 dwc2_hsotg
  353. [    0.663625] usb usb1: SerialNumber: ff400000.usb
  354. [    0.664841] hub 1-0:1.0: USB hub found
  355. [    0.665254] hub 1-0:1.0: 1 port detected
  356. [    0.889539] phy phy-ff008000.syscon:[email protected]: charger = USB_SDP_CHARGER
  357. [    0.890321] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  358. [    0.890945] ehci-platform: EHCI generic platform driver
  359. [    0.895281] ehci-platform ff440000.usb: EHCI Host Controller
  360. [    0.896118] ehci-platform ff440000.usb: new USB bus registered, assigned bus number 2
  361. [    0.897010] ehci-platform ff440000.usb: irq 21, io mem 0xff440000
  362. [    0.906107] ehci-platform ff440000.usb: USB 2.0 started, EHCI 1.00
  363. [    0.906900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  364. [    0.907541] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  365. [    0.908240] usb usb2: Product: EHCI Host Controller
  366. [    0.908707] usb usb2: Manufacturer: Linux 4.4.143 ehci_hcd
  367. [    0.909228] usb usb2: SerialNumber: ff440000.usb
  368. [    0.910473] hub 2-0:1.0: USB hub found
  369. [    0.910894] hub 2-0:1.0: 1 port detected
  370. [    0.911952] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  371. [    0.912602] ohci-platform: OHCI generic platform driver
  372. [    0.913502] ohci-platform ff450000.usb: Generic Platform OHCI controller
  373. [    0.914497] ohci-platform ff450000.usb: new USB bus registered, assigned bus number 3
  374. [    0.915388] ohci-platform ff450000.usb: irq 22, io mem 0xff450000
  375. [    0.974287] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  376. [    0.974929] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  377. [    0.975626] usb usb3: Product: Generic Platform OHCI controller
  378. [    0.976188] usb usb3: Manufacturer: Linux 4.4.143 ohci_hcd
  379. [    0.976709] usb usb3: SerialNumber: ff450000.usb
  380. [    0.977917] hub 3-0:1.0: USB hub found
  381. [    0.978381] hub 3-0:1.0: 1 port detected
  382. [    0.980897] i2c /dev entries driver
  383. [    0.981721] usbcore: registered new interface driver uvcvideo
  384. [    0.982300] USB Video Class driver (1.1.1)
  385. [    0.985072] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=2147483647
  386. [    0.986242] rockchip-thermal ff1f0000.tsadc: tsadc is probed successfully!
  387. [    0.988314] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
  388. [    0.989153] Bluetooth: Virtual HCI driver ver 1.5
  389. [    0.990141] cpu cpu0: leakage=8
  390. [    0.990723] cpu cpu0: Failed to get pvtm
  391. [    0.992393] cpu cpu0: l=0 h=55000 hyst=5000 l_limit=1200000000 h_limit=1008000000
  392. [    0.994624] Synopsys Designware Multimedia Card Interface Driver
  393. [    0.996330] dwmmc_rockchip ff480000.dwmmc: IDMAC supports 32-bit address mode.
  394. [    0.997070] dwmmc_rockchip ff480000.dwmmc: Using internal DMA controller.
  395. [    0.997717] dwmmc_rockchip ff480000.dwmmc: Version ID is 270a
  396. [    0.998357] dwmmc_rockchip ff480000.dwmmc: DW MMC controller at irq 23,32 bit host data width,256 deep fifo
  397. [    1.014277] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  398. [    1.031250] dwmmc_rockchip ff480000.dwmmc: 1 slots initialized
  399. [    1.034208] dwmmc_rockchip ff490000.dwmmc: IDMAC supports 32-bit address mode.
  400. [    1.034968] dwmmc_rockchip ff490000.dwmmc: Using internal DMA controller.
  401. [    1.036642] dwmmc_rockchip ff490000.dwmmc: Version ID is 270a
  402. [    1.039271] dwmmc_rockchip ff490000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
  403. [    1.040268] dwmmc_rockchip ff490000.dwmmc: No vmmc regulator found
  404. [    1.040875] dwmmc_rockchip ff490000.dwmmc: No vqmmc regulator found
  405. [    1.054251] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  406. [    1.064305] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  407. [    1.065295] mmc0: new high speed SDHC card at address 5048
  408. [    1.070822] mmcblk0: mmc0:5048 SD16G 14.4 GiB
  409. [    1.071314] dwmmc_rockchip ff490000.dwmmc: 1 slots initialized
  410. [    1.074505] dwmmc_rockchip ff4a0000.dwmmc: num-slots property not found, assuming 1 slot is available
  411. [    1.075653] dwmmc_rockchip ff4a0000.dwmmc: IDMAC supports 32-bit address mode.
  412. [    1.076654] dwmmc_rockchip ff4a0000.dwmmc: Using internal DMA controller.
  413. [    1.077419] dwmmc_rockchip ff4a0000.dwmmc: Version ID is 270a
  414. [    1.078167] dwmmc_rockchip ff4a0000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  415. [    1.079345] dwmmc_rockchip ff4a0000.dwmmc: No vmmc regulator found
  416. [    1.080071] dwmmc_rockchip ff4a0000.dwmmc: No vqmmc regulator found
  417. [    1.080892]  mmcblk0: p1 p2
  418. [    1.082754] dwmmc_rockchip ff4a0000.dwmmc: allocated mmc-pwrseq
  419. [    1.098260] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  420. [    1.114293] dwmmc_rockchip ff4a0000.dwmmc: 1 slots initialized
  421. [    1.116074] hidraw: raw HID events driver (C) Jiri Kosina
  422. [    1.116665] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
  423. [    1.118000] mmc1: new SD card at address 1388
  424. [    1.118347] usbcore: registered new interface driver usbhid
  425. [    1.118350] usbhid: USB HID core driver
  426. [    1.118648] rockchip-dmc dmc: failed to get the count of devfreq-event in /dmc node
  427. [    1.118954] rockchip-dmc dmc: Failed to get leakage
  428. [    1.119038] rockchip-dmc dmc: Failed to get pvtm
  429. [    1.119344] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
  430. [    1.119352] rockchip-dmc dmc: failed to get vop pn to msch rl
  431. [    1.119360] rockchip-dmc dmc: don't add devfreq feature
  432. [    1.121430] rknandc_base v1.1 2017-01-11
  433. [    1.121661] rksfc_base v1.1 2016-01-08
  434. [    1.124342] mmcblk1: mmc1:1388 Stora 964 MiB
  435. [    1.126785] dummy_codec dummy-codec: Unable to get mclk
  436. [    1.128070] rk3308-acodec ff560000.acodec: Don't need hp-ctl gpio
  437. [    1.128748] rk3308-acodec ff560000.acodec: Don't need spk-ctl gpio
  438. [    1.129425] rk3308-acodec ff560000.acodec: Don't need pa-drv gpio
  439. [    1.129999] rk3308-acodec ff560000.acodec: De-pop as much as possible
  440. [    1.130766] The acodec version is: b
  441. [    1.138248] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
  442. [    1.182178] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
  443. [    1.191754] rk-multicodecs acodec-sound: rk3308-hifi <-> ff320000.i2s mapping ok
  444. [    1.193782] input: rockchip,rk3308-acodec Headphones as /devices/platform/acodec-sound/sound/card1/input0
  445. [    1.195529] u32 classifier
  446. [    1.195828] Netfilter messages via NETLINK v0.30.
  447. [    1.196350] ip_set: protocol 6
  448. [    1.196882] ip_tables: (C) 2000-2006 Netfilter Core Team
  449. [    1.197407] Initializing XFRM netlink socket
  450. [    1.198439] NET: Registered protocol family 10
  451. [    1.200115] ip6_tables: (C) 2000-2006 Netfilter Core Team
  452. [    1.200694] NET: Registered protocol family 17
  453. [    1.201145] NET: Registered protocol family 15
  454. [    1.201613] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you n.
  455. [    1.202166] rk3308-acodec ff560000.acodec: Don't need to change dac_output: 0
  456. [    1.204006] Bridge firewalling registered
  457. [    1.204613] Bluetooth: RFCOMM TTY layer initialized
  458. [    1.205092] Bluetooth: RFCOMM socket layer initialized
  459. [    1.205602] Bluetooth: RFCOMM ver 1.11
  460. [    1.205975] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  461. [    1.206567] Bluetooth: HIDP socket layer initialized
  462. [    1.207045] 8021q: 802.1Q VLAN Support v1.8
  463. [    1.207490] [WLAN_RFKILL]: Enter rfkill_wlan_init
  464. [    1.208503] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  465. [    1.208979] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = rtl8723ds
  466. [    1.209636] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  467. [    1.210386] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  468. [    1.211346] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 0, flags = 0.
  469. [    1.212354] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  470. [    1.212908] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  471. [    1.213542] [BT_RFKILL]: Enter rfkill_rk_init
  472. [    1.214947] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 135.
  473. [    1.215861] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 139.
  474. [    1.216809] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 140.
  475. [    1.217679] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
  476. [    1.218550] [BT_RFKILL]: Request irq for bt wakeup host
  477. [    1.219189] [BT_RFKILL]: ** disable irq
  478. [    1.219936] [BT_RFKILL]: bt_default device registered.
  479. [    1.220646] Key type dns_resolver registered
  480. [    1.221895] flash vendor_init_thread!
  481. [    1.222360] flash vendor storage:20170308 ret = -1
  482. [    1.223777] registered taskstats version 1
  483. [    1.225782] Key type encrypted registered
  484. [    1.227110] hctosys: unable to open rtc device (rtc0)
  485. [    1.230319] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
  486. [    1.241966] ALSA device list:
  487. [    1.242340]   #0: Loopback 1
  488. [    1.242627]   #1: rockchip,rk3308-acodec
  489. [    1.317563] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  490. [    1.318491] VFS: Mounted root (ext4 filesystem) on device 179:2.
  491. [    1.320187] devtmpfs: mounted
  492. [    1.320790] Freeing unused kernel memory: 384K
  493. [    1.661499] systemd[1]: System time before build time, advancing clock.
  494. [    1.673646] cgroup: cgroup2: unknown option "nsdelegate"
  495. [    1.705419] systemd[1]: systemd 243.2+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYP)
  496. [    1.709364] systemd[1]: Detected architecture arm64.
  497.  
  498. Welcome to Poky (Yocto Project Reference Distro) 3.0.4 (zeus)!
  499.  
  500. [    1.736765] systemd[1]: Set hostname to <rockpi-s-rk3308>.
  501. [    2.073956] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updati.
  502. [    2.292034] systemd[1]: /lib/systemd/system/rpcbind.socket:5: ListenStream= references a path below legacy directory /var/run/, upd.
  503. [    2.307908] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
  504. [    2.309078] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewa.
  505. [    2.310332] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
  506. [    2.314007] systemd[1]: Created slice system-getty.slice.
  507. [  OK  ] Created slice system-getty.slice.
  508. [    2.326422] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
  509. [    2.328620] systemd[1]: Created slice system-serial\x2dgetty.slice.
  510. [  OK  ] Created slice system-serial\x2dgetty.slice.
  511. [    2.342436] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
  512. [    2.344520] systemd[1]: Created slice User and Session Slice.
  513. [  OK  ] Created slice User and Session Slice.
  514. [    2.350492] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
  515. [    2.351665] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  516. [  OK  ] Started Dispatch Password ��…ts to Console Directory Watch.
  517. [    2.353764] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
  518. [    2.355039] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  519. [  OK  ] Started Forward Password R��…uests to Wall Directory Watch.
  520. [    2.357324] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
  521. [    2.358338] systemd[1]: Reached target Paths.
  522. [  OK  ] Reached target Paths.
  523. [    2.366451] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
  524. [    2.367441] systemd[1]: Reached target Remote File Systems.
  525. [  OK  ] Reached target Remote File Systems.
  526. [    2.374509] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
  527. [    2.375518] systemd[1]: Reached target Slices.
  528. [  OK  ] Reached target Slices.
  529. [    2.382516] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
  530. [    2.383523] systemd[1]: Reached target Swap.
  531. [  OK  ] Reached target Swap.
  532. [    2.390692] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
  533. [    2.394256] systemd[1]: Listening on Syslog Socket.
  534. [  OK  ] Listening on Syslog Socket.
  535. [    2.403039] systemd[1]: Listening on initctl Compatibility Named Pipe.
  536. [  OK  ] Listening on initctl Compatibility Named Pipe.
  537. [    2.412554] systemd[1]: Listening on Journal Audit Socket.
  538. [  OK  ] Listening on Journal Audit Socket.
  539. [    2.416033] systemd[1]: Listening on Journal Socket (/dev/log).
  540. [  OK  ] Listening on Journal Socket (/dev/log).
  541. [    2.423967] systemd[1]: Listening on Journal Socket.
  542. [  OK  ] Listening on Journal Socket.
  543. [    2.432648] systemd[1]: Listening on Network Service Netlink Socket.
  544. [  OK  ] Listening on Network Service Netlink Socket.
  545. [    2.443977] systemd[1]: Listening on udev Control Socket.
  546. [  OK  ] Listening on udev Control Socket.
  547. [    2.447193] systemd[1]: Listening on udev Kernel Socket.
  548. [  OK  ] Listening on udev Kernel Socket.
  549. [    2.458183] systemd[1]: Mounting Huge Pages File System...
  550.          Mounting Huge Pages File System...
  551. [    2.469829] systemd[1]: Mounting POSIX Message Queue File System...
  552.          Mounting POSIX Message Queue File System...
  553. [    2.485647] systemd[1]: Mounting Kernel Debug File System...
  554.          Mounting Kernel Debug File System...
  555. [    2.501869] systemd[1]: Mounting Temporary Directory (/tmp)...
  556.          Mounting Temporary Directory (/tmp)...
  557. [    2.519898] systemd[1]: Starting Create list of static device nodes for the current kernel...
  558.          Starting Create list of st��…odes for the current kernel...
  559. [    2.533773] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
  560. [  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
  561. [    2.543217] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
  562. [    2.552787] systemd[1]: Starting Journal Service...
  563.          Starting Journal Service...
  564. [    2.576600] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
  565. [    2.584777] systemd[1]: Mounting FUSE Control File System...
  566.          Mounting FUSE Control File System...
  567. [    2.593367] systemd[1]: Mounting Kernel Configuration File System...
  568.          Mounting Kernel Configuration File System...
  569. [    2.607724] systemd[1]: Starting Remount Root and Kernel File Systems...
  570.          Starting Remount Root and Kernel File Systems...
  571. [    2.618757] systemd[1]: Starting Apply Kernel Variables...
  572.          Starting Apply Kernel Variables...
  573. [    2.647276] systemd[1]: Starting udev Coldplug all Devices...
  574.          Starting udev Coldplug all Devices...
  575. [    2.657226] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  576. [    2.699683] systemd[1]: Mounted Huge Pages File System.
  577. [  OK  ] Mounted Huge Pages File System.
  578. [    2.703111] systemd[1]: Mounted POSIX Message Queue File System.
  579. [  OK  ] Mounted POSIX Message Queue File System.
  580. [    2.715055] systemd[1]: Mounted Kernel Debug File System.
  581. [  OK  ] Mounted Kernel Debug File System.
  582. [    2.723257] systemd[1]: Mounted Temporary Directory (/tmp).
  583. [  OK  ] Mounted Temporary Directory (/tmp).
  584. [    2.732839] systemd[1]: Started Create list of static device nodes for the current kernel.
  585. [  OK  ] Started Create list of sta��… nodes for the current kernel.
  586. [    2.735882] systemd[1]: Mounted FUSE Control File System.
  587. [  OK  ] Mounted FUSE Control File System.
  588. [    2.750374] systemd[1]: Mounted Kernel Configuration File System.
  589. [  OK  ] Mounted Kernel Configuration File System.
  590. [    2.760643] systemd[1]: Started Remount Root and Kernel File Systems.
  591. [  OK  ] Started Remount Root and Kernel File Systems.
  592. [    2.764527] systemd[1]: Started Apply Kernel Variables.
  593. [  OK  ] Started Apply Kernel Variables.
  594. [    2.767050] systemd[1]: Condition check resulted in Create System Users being skipped.
  595. [    2.779479] systemd[1]: Starting Create Static Device Nodes in /dev...
  596.          Starting Create Static Device Nodes in /dev...
  597. [    2.875573] systemd[1]: Started Create Static Device Nodes in /dev.
  598. [  OK  ] Started Create Static Device Nodes in /dev.
  599. [    2.883163] systemd[1]: Started Journal Service.
  600. [  OK  ] Started Journal Service.
  601. [  OK  ] Reached target Local File Systems (Pre).
  602.          Mounting /var/volatile...
  603.          Starting Flush Journal to Persistent Storage...
  604.          Starting udev Kernel Device Manager...
  605. [  OK  ] Mounted /var/volatile.
  606.          Starting Load/Save Random Seed...
  607. [  OK  ] Reached target Local File Systems.
  608. [    2.987935] systemd-journald[155]: Received client request to flush runtime journal.
  609. [  OK  ] Started Flush Journal to Persistent Storage.
  610.          Starting Create Volatile Files and Directories...
  611. [  OK  ] Started Create Volatile Files and Directories.
  612.          Starting Network Time Synchronization...
  613.          Starting Update UTMP about System Boot/Shutdown...
  614. [  OK  ] Started udev Kernel Device Manager.
  615. [  OK  ] Started Update UTMP about System Boot/Shutdown.
  616. [  OK  ] Started udev Coldplug all Devices.
  617. [  OK  ] Reached target Sound Card.
  618. [  OK  ] Started Network Time Synchronization.
  619. [  OK  ] Reached target System Initialization.
  620. [  OK  ] Started Daily Cleanup of Temporary Directories.
  621. [  OK  ] Reached target System Time Set.
  622. [  OK  ] Reached target System Time Synchronized.
  623. [  OK  ] Started Daily apt download activities.
  624. [  OK  ] Reached target Timers.
  625. [  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  626. [  OK  ] Listening on D-Bus System Message Bus Socket.
  627. [  OK  ] Listening on RPCbind Server Activation Socket.
  628.          Starting sshd.socket.
  629. [  OK  ] Listening on Load/Save RF ��…itch Status /dev/rfkill Watch.
  630.          Starting Load/Save RF Kill Switch Status...
  631. [  OK  ] Listening on sshd.socket.
  632. [  OK  ] Reached target Sockets.
  633. [  OK  ] Reached target Basic System.
  634. [    4.015262] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin output high!
  635.          Starting Bluetooth service...
  636. [  OK  ] Started Kernel Logging Service.
  637. [  OK  ] Started System Logging Service.
  638. [  OK  ] Started D-Bus System Message Bus.
  639. [    4.086169] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin input!
  640. [    4.086840] [BT_RFKILL]: ENABLE UART_RTS
  641.          Starting Install HCI UART Module...
  642.          Starting Packet Filtering Framework...
  643.          Starting rng-tools.service...
  644.          Starting Login Service...
  645. [    4.190127] [BT_RFKILL]: DISABLE UART_RTS
  646. [    4.190613] [BT_RFKILL]: bt turn on power
  647. [    4.246132] vendor storage:20160801 ret = -1
  648. [    4.309554] Bluetooth: HCI UART driver ver 2.2.d448471.20190215-141136
  649. [    4.310219] Bluetooth: HCI H4 protocol initialized
  650. [    4.310672] Bluetooth: HCI Realtek H5 protocol initialized
  651. [    4.311177] rtk_btcoex: rtk_btcoex_init: version: 1.2
  652. [    4.311640] rtk_btcoex: create workqueue
  653. [    4.312003] rtk_btcoex: Coex over UDP
  654. [    4.332431] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2
  655. [  OK  ] Started Load/Save RF Kill Switch Status.
  656. [  OK  ] Started Install HCI UART Module.
  657. [  OK  ] Started Packet Filtering Framework.
  658. [  OK  ] Started rng-tools.service.
  659. [  OK  ] Started Bluetooth service.
  660. [  OK  ] Reached target Network (Pre).
  661.          Starting Network Manager...
  662.          Starting LSB: network connection manager...
  663.          Starting Load RTL8723DS Bluetooth firmware...
  664.          Starting Network Service...
  665. [    4.491650] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin output high!
  666.          Starting Hostname Service...
  667. [    4.562200] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin input!
  668. [    4.562882] [BT_RFKILL]: ENABLE UART_RTS
  669. [    4.666116] [BT_RFKILL]: DISABLE UART_RTS
  670. [    4.666580] [BT_RFKILL]: bt turn on power
  671. [  OK  ] Started Load RTL8723DS Bluetooth firmware.
  672. [  OK  ] Started Login Service.
  673. [  OK  ] Started Network Service.
  674.          Starting Network Name Resolution...
  675. [  OK  ] Started LSB: network connection manager.
  676. [  OK  ] Started Network Manager.
  677. [  OK  ] Started Hostname Service.
  678. [    5.143420] random: nonblocking pool is initialized
  679. [  OK  ] Started Load/Save Random Seed.
  680.          Starting Network Manager Script Dispatcher Service...
  681. [  OK  ] Started Network Manager Script Dispatcher Service.
  682. [  OK  ] Started Network Name Resolution.
  683. [  OK  ] Reached target Network.
  684. [  OK  ] Reached target Host and Network Name Lookups.
  685.          Starting Avahi mDNS/DNS-SD Stack...
  686.          Starting DNS forwarder and DHCP server...
  687.          Starting Permit User Sessions...
  688. [  OK  ] Started Permit User Sessions.
  689. [  OK  ] Started Avahi mDNS/DNS-SD Stack.
  690. [  OK  ] Started Getty on tty1.
  691. [  OK  ] Started Serial Getty on ttyS0.
  692. [  OK  ] Reached target Login Prompts.
  693. [  OK  ] Started DNS forwarder and DHCP server.
  694. [  OK  ] Reached target Multi-User System.
  695.          Starting Update UTMP about System Runlevel Changes...
  696. [  OK  ] Started Update UTMP about System Runlevel Changes.
  697.  
  698. Poky (Yocto Project Reference Distro) 3.0.4 rockpi-s-rk3308 ttyS0
  699.  
  700. rockpi-s-rk3308 login: [    6.846337] rk_gmac-dwmac ff4e0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  701.  
  702.  

Reply to "Untitled"